UL398 Fig 8.2 Probe for Film Coated Wire
|
...:It is used for the testing of coating lines of the enamel (i.e., transformers and inductors). Test sample:Transformers and inductors. Feature:Nylon handle + probe, it is manufactured according to the standard figure. Parameters: Picture for reference:...
shanghai kerang technology co ltd
|
UL398 Fig 8.2 Test Finger Probe for Film - coated Wire
|
... Product information: This probe conforms to standard requirement of UL398 Fig 8.2(PA170B),UL507(PA170D),UL749 Fig 2,UL982 Fig 58.6 and UL1278 Fig 8.2(PA140A). It is used for the enamel wire. The handle is made of Nylon while the probe is stainless steel....
Guangzhou HongCe Equipment Co., Ltd.
|
PG-PA145 Lab Testing Equipment UL Test Rod Probe Meet UL982 Standard Requirements
|
...Probe meet the requirements of UL982 Standard 1. Introduction of UL Test Rod Probe The UL test rod probe is designed according to the standard of UL982 fig. 58.6, UL1278 Fig. 8.2, UL398 fig. 8.2 (PA170B), UL507 (PA170D) and UL749 fig.2. It's used for testing enamel coated wires. 2. Application of UL Test Rod Probe: Transformers and Inductors 3. Parameter of UL test Rod Probe......
Pego Electronics (Yi Chun) Company Limited
|
PA140A UL Enameled Wire Probe of UL1278
|
...probe is used for the enamel wire, shall be applied to any depth that the opening will permit and shall be rotated or angled before, during, and after insertion through the opening to any position that is necessary to examine the enclosure. Technical parameters: Total Length: 101.6mm(4 inch) Head Diameter: 12.7mm(1/2 inch) Former Head Radius: 6.4mm(1/4 inch) Tail Diameter:19.1mm(3/4 inch) Standard: UL398 Fig......
HK LEE HING INDUSTRY CO., LIMITED
|
