IEC 60227-2 Clause 3.2 3.3 Vehicle Charging Cables Bending Snatch Test Equipment
|
..., and it is also used to test the broken cores of PVC insulated cables under load to verify their reliability. Bending Test A sample of vehicle charging cables of appropriate length shall be fixed in the apparatus as shown in figure 2, and loaded with a...
Sinuo Testing Equipment Co. , Limited
|
IEC62196-1 Clause 26.4 EV Plug And Vehicle Connector Cable Bending Test Apparatus For Flexing Test
|
... to IEC62196-1 clause 26.4 figure 20 and table 14, it is applied to do mechanical load flexing test of the non-rewirable accessories of ev plug and vehicle connector. Test method: The sample is fixed to the oscillating member of the apparatus so that at...
Pego Electronics (Yi Chun) Company Limited
|
Electric Vehicle Charging Connector Withdrawal Test Equipment IEC 62196-1
|
... Overview It is used to check the withdrawal force required when the test plug is withdrawn from the socket-outlet and latching device. Technical Parameters The test plug, according to the relevant standard sheets, shall have finely ground contacts of...
Sinuo Testing Equipment Co. , Limited
|
6 Station Wire Testing Equipment For Robot Cable Bending Test Cria 0003.2
|
...Cable Bending Testing Equipment, 6 Station CRIA 0003.2 Wire Testing Equipment Application: The robot cable bending testing equipment conforms to TUV, VDE and UL. It can be used to test bending of the robot cable, flexible cable, bending flexible cable, drag chain cable, chain bend and high flexible cable. The machine is a six-station structure, which is mainly used for repeated bending test......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
High Precision Cable Bending Testing Machine/Cable Testing Equipment for Headphone Line or USB Line
|
... Cable Bending Testing Machine/Cable Testing Equipment for Headphone Line or USB Line Model: RS-8116-6B Purpose: It is suitable for bending resistance test on headphone cable, USB cable, multicore cable conductor,flat cable and signal line,etc. The test ......
Infinity Machine International Inc.
|
IEC-60794-1-2 Standard Fiber Optic Cable Repeated Bending Test Equipment
|
... Test Equipment: Optical Fiber Cable Repeated Bending Tester is used to determine the ability of a fiber optic cable to withstand repeated bending (cyclic flexing). Optical Fiber Cable Impact Tester Series allows a cable sample to be bent backwards and...
Dongguan Wirecan Technology Co.,Ltd.
|
Copper Wire Electrical Vehicle Charging Cable Charging Pile Cable Factory
|
Charging Cables ·Applications: applicable to charging cables of rated voltages up to and including DC 1000V for connection set for conductive charging of electric vehicles. ·Properties: Conductor:Multiple stranded conductor Insulation:TPE Jacket:TPE Colour:Black ◆ PRODUCT DESCRIPTION: Temperature range:-40℃ ~90℃ Rating voltage:DC 1000V Reference standard:GB/T 33594-2017 Flame Test:IEC 60331-1-2 Min Bending......
ECHU Special Wire & Cable (Kunshan) Co., Ltd.
|
Automatic Cable Wire Lab Plug Bend Testing Equipment AC 220V 10 ~ 60 times / min
|
...Cable Wire Lab Test Equipment Plug Bend Testing Equipment Application: Automatic Cable Wire Lab Test Equipment Plug Bending Tester is applied for bending endurance test for wire connected with plug. This device is designed and manufactured to meet the requirements of UL817, IEC60884, GB2099. Features: 1. Operated by buttons. 2. When test......
ASLi (CHINA) TEST EQUIPMENT CO., LTD
|
10-60 Times/Min Cable Flex Tester , 6 Station Cable Bending Testing Machine
|
...Cable Flex Test Equipment 6 Station 10~60 Times/Min Description: UL817 IEC60335 cable bending testing machine can test six cables or cord sfitted with plugs simultaneously. This improves testing capacity.IEC60884-1 calls for 10,000 flexing at a rate of 60 flexing per minute. Halfway through the test......
DONGGUAN YUYANG INSTRUMENT CO.,LTD
|
Electric Vehicle Charging Cable 32A Type1 To Type2 Ev Charging Cable 5M
|
...Vehicle Charging cable 32A Type1 to Type2 ev charging cable 5M Features Model Type1 to Type2 Type EV Charging cable Working frequency Low frequency Interface Type AC/DC Line length 244 ,214(mm) Craftsmanship Injection molding Insulator material Industrial plastics Material PC+PA Quality assurance Every production process has a special person to test......
Dongguan Dasheng Electronic Co., Ltd.
|
Submit your “vehicle charging cables bending test equipment” inquiry in a minute :