Optical Cable Survey Instrument Optical Fiber Tester AFCID
|
...Optical cable survey instrument Optical fiber tester AFCID Technical Specification: model TK100-20N TK100-40N Test mode Single fiber test Wavelength 1550nm Minimum output power of the light source -15dBm -8dBm Unidirectional cable loss 5dB 10dB Measuring distance 20km 40km Initial blind area NO Requirements for return loss at optical cable ends ≤20dB SNR ＞40dB Fiber Interface SM Optical connector FC/APC VFL......
Guangzhou UC Instruments., Co. Ltd.
|
FONGKO Optical Fiber Tester , 1310 1550nm Handheld Smart Time Domain Reflectometer
|
FONGKO Optical Fiber Tester Time Domain Reflectometer 26/24dB Event Map OPM LS VFL RJ45 Flashlight Mini Pro Fiber Optic OTDR Mini PRO OTDR Model FKEQU-151 Wavelength 1310nm/1550nm±20nm Fiber Type G.652 Dynamic Range 26dB/24dB Event Blind Zone 2.5m ATT ......
Shenzhen Fongko Communication Equipment Co.,Ltd
|
Fiber Tool Kits Pen-type Visual Fault Finder Locator VFL Optical Fiber FP-LD Emitter 10Mw
|
Fiber Tool Kits Pen-type Visual Fault Finder Locator VFL Optical Fiber FP-LD Emitter 10Mw The JW105 Pentype VFL is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical network. It includes: Finding the breakpoint, poor connections, bending or cracking in fiber optic cables. Finding the faults of OTDR dead zone End-to-end visual fiber......
YINGDA TECHNOLOGY LIMITED
|
750-1700 Nm +VFL Optical Fiber Identifier With Lower Power Indication
|
... in single mode and multimode fiber. During maintenance, installation, cabling, and recovery, it is often necessary to find and separate a specific fiber without interrupting the service, and to inject 1310nm or 1550nm band modulated (270Hz, 1KHz, 2KHz)...
Shenzhen Sopto Technology Co., Ltd
|
Pentype VFL Optical Fiber Visual Fault locator 40MW For End-to-End Visual Fiber Identification Fiber Testing Tools
|
Pentype VFL Optical Fiber Visual Fault locator 40MW For End-to-End Visual Fiber Identification Fiber Testing Tools Method of use 1. Screw the end cap from the pen, the battery will be prepared into the pen, battery cathode to the end cap, the ......
Shenzhen Hicorpwell Technology Co., Ltd
|
high power fiber optic measurement optical fiber tester in China with good price
|
... fiber light pen adopt 650nm laser diode as a light emitting device, the output power can be up to 1mw-30mw. It’s applied to single-mode or multi-mode fiber measurements.It is an ideal tool to test various types of optic fiber patch cords, , ribbon,...
Henan Huachuang Communication Equipment Co.Ltd.
|
Insertion Loss and Return Loss Optical Fiber Tester , FC - APC Fiber Connectors
|
...Optical Fiber Tester , FC - APC Fiber Connectors FOCC Fiber Optic Insertion Loss and Return Loss Testers is designed based on our many years experience in production and testing of passive fiber optic communication devices and instrument. Based on the local demand, we learn the advantages of the instruments from abroad to manufacture this high precision and stable insertion loss and return loss tester......
FOCC FIBER OPTIC CO.,LIMITED
|
DAMU Optical Fiber Tester Equipment Microscope End Face Detector
|
optical fiber tester fiber optic Microscope end face detector high quality inspecter Inspection machine The optical fiber can be amlified to 200 times , 400times , 800times , and the amplified image to the video signal output to the display,only need to connect the power supply can work , It is very simple and fast!Greatly impove work efficiency Optical fiber microscope which is testing instruments. mainly used for optical fiber......
Shenzhen damu technology co. LTD
|
TFT Display 5s Splicing FTTH Tools AI-9 VFL Optical Fiber Fusion Splicer
|
.... Specification: Six motors ,Core alignment 5 seconds fast splicing 15 seconds fast heating Built-in Power Meter and VFL Anti-theft lock,Remote control Description:...
Shenzhen Hong An Jia Technology Co.,Ltd.
|
IEC 60794-1-21-2015 Cable Bending Test Machine 90° Bending Durabity Optical Fiber Tester
|
...optical cable to withstand repeated bending, by applying repeated bending force, for qualified optical cable requires that the optical fiber is not broken, the attenuation change of the optical fiber does not exceed the value specified in the optical cable product standard, and the optical......
SKYLINE INSTRUMENTS CO.,LTD
|
Submit your “vfl optical fiber tester” inquiry in a minute :