walking beam type billet reheating furnace

35t/h Walking Beam Continuous Heating Furnace Feeder End Charging and Discharging Product description This project involves the design, manufacture, construction and installation, masonry, coating, commissioning of cold and hot state, personnel training......

...furnace body:　 This walking beam type furnace is installed in one line. Shell and framework are made of steel plate and formed steel. Furnace body is supported in a certain height by column and rack, so that furnace can run in stable and reliable condition, shell is made of A3,δ4mm steel plates which are welded with furnace channel steel. Furnace......

1. Working Procedures of the production line : ﹡Cylinders are loaded at transfer roller; ﹡Cylinders are transferred onto loading table; and charged inside of hardening furnace chamber from one end of furnace door; ﹡Cylinders are horizontally heated inside......

...billets, being cut to a specified length and sent through a walking-beam reheat furnace, where temperatures reach nearly 2,300°F. After exiting the reheat furnace, the preheated rounds are turned into a tube shell in the rotary piercing mill as the billets......

..., blooms, beam blanks and slabs from the steelmaking process are shaped into basic products at carefully controlled elevated temperatures. The method that is most commonly used for shaping is to heat the steel to around 1,280°C in a reheat furnace and...