0 1 1 2mm outlet diameter wire drawing machine

Brand Name:Newlead

Model Number:24D

Place of Origin:Jiangsu, China (Mainland)

... diameter: 0.15mm-0.3mm 4. Maximum drawing speed: 2000MPM/MAX 5. Dies Number: 24 dies (Customer self provided) 25mm*8 No. 1 is independent; No.2~24 are made of cast iron ...

Brand Name:JINTE

Model Number:JT-D

Place of Origin:China

Galvanized Zinc Automatic Prestressed Steel Small Wire Drawing Machine For Cable Wire Drawing Machine Product Description Product Name Wet Wire Drawing Machine Max Inlet Diameter 2.0mm Max Outlet Diameter 0.6mm Place Of Origin Hebei,China Weight 1T ...

Brand Name:Wiremac

Model Number:24DHACO6

Place of Origin:China

...Wire Drawing Machine Second Hand China Introduction Main performance of straight wire drawing unit 1) Equipment capacity: maximum incoming diameter Φ 6.5mm, tensile strength ≤ 1350MPa; The minimum outlet diameter is 1.2mm. 2) Maximum drawing speed: 720m / min. 3) Braking capacity: at limit speed, normal braking ≤ 50s, fast braking ≤ 15s, emergency braking ≤ 3S. 4) Take-up mode: One-wheel large coil take-up, wire...

Categories:Wire Drawing Machine

Country/Region:china

Product Description Product Description Flux cored welding wire production line: Product Parameters 1.Technical specification Section type overlap Steel strip size 14 x 0.9mm Filling ratio 13%~25% (depend on the powder) Diameter after forming mill 4.7mm ...

Brand Name:JD

Model Number:24DT

Place of Origin:China

... image: 3.Technical parameter: JD-24DT wire drawing and annealing machine Machine type JD-24DT Control system Traditional analog type Inverter control Dual Inverter control Drawing dies No./Max. 24 Inlet diameter Φ0.60-1.20mm Outlet diameter φ0.10-0

Brand Name:HOOHA

Model Number:250/17-21

Place of Origin:Guangdong

... wire drawing and annealing 2. Inlet diameter: Ф2.5mm-Ф3.5mm 3. Outlet diameter: Ф0.4mm-Ф1.2mm 4. Maximum mechanical speed: 1200MPM/MAX 5. Dies Number: 17 dies (Customer self provided); Ф30mm-15mmT or Ф25mm-...

Brand Name:Bright Wire Drawing Machine

Place of Origin:jiangyin china

...Min diameter of outlet wire Φ1.2mm 4 Strength of inlet wire ≤ 600MPa 5 Maxtotal compression ratio 63% 6 Maxcompression ratio per block ≤ 20% 7 Max drawing speed ≤ 18m/s 8 Requirement of water pressure ≥ 0.3MPa 9 Requirement of air pressure ≥ 0