0 1mm mechanical seal single spring

Brand Name:JR

Model Number:spring

Place of Origin:MADE IN CHINA

Mechanical Seal Components Spring Custom Made Stainless Steel Compressing Spring Mechanical Seal Parts Description: High Quality wave spring and compression spring Flat coil spring for mold customized industrial compressing spring wave spring and compression spring for HJ9 ,M7N wave spring and compression spring Specification Wire diameters from 0.1mm Spring type Compression spring ,Extension spring ,Torsion spring ,Shaped spring...

Brand Name:Bogeman

Model Number:M2N 12mm-60mm

Place of Origin:Guangzhou, China

...Mechanical Seal Single Spring SS304 Mechanical Seal Replaces Burgman M2N Seal Mechanical Seal CAR SSIC PTFE Basic Info. Model NO. Metal bellows seal Manifold Pump Seal M3 Seal Grundfos Pump Seal Rubber Bellow Seal Che Pump Seal Mechanical Seal Flygt pump seal Pump Seal Industrial Pump Oil pump seal ABS Pump Seal Blackmer Seal Food pump seal CAR/SIC/PTFE Lowara Pump Seal O-ring Oil pump seal...

Brand Name:JG

Model Number:1523

Place of Origin:Zhejiang, China

... Seal Type 1523/1524 Single Spring Mechanical Seal Features: • Single seal • Large spring • Balanced • Dependent on the direction of ratation The series is a typical large spring mechanical seals, built single-end spring and coil spring balanced...

Brand Name:YUE MI

Model Number:103A,103B

Place of Origin:Guangzhou, China

... SiC/VIT Stationary Ring SiC/VIT Spring SUS304/SUS316 Stationary Seat SUS304/SUS316 Secondary Seal Fkm/EPDM Rotary Ring Holder SUS304/SUS316 Preperation: 1. Shaft Outside Diameter is within tolerance +-0.05mm 2. Shaft run out <0.1mm 3. Shaf end float <0

Brand Name:ZOZHI

Model Number:2100-12mm

Place of Origin:Fuan, Fujian

... the spring seal, rubber bellows design to avoid torsion. - The installation size conforms to the standard for ISO3069 and DIN24960. Applications Used in all types of rotating ...

Brand Name:KALU

Model Number:KL-250

Place of Origin:China

...seal Mechanical Seal, single spring design. Operating range: Temperature: -20--180℃ Speed: ≤10m/s Pressure:≤1.0Mpa Standard size: 10-100mm Material: Rotary ring: SUS304/Carbon/Sic/TC Stationary Ring:Carbon/Ceramic/Sic/TC Secondary seal: NBR, EPDM, etc. Spring...

Brand Name:TAKUMI

Model Number:All model

Place of Origin:CHINA

...Spring Mechanical Seal Products Description Water Pump Shaft Helical Spring Mechanical Seal Operating Limits Temperature: -30°C~+200°C Pressure: ≤0.5MPa Speed: ≤10m/s Water Pump Shaft Helical Spring Mechanical Seal Description Single seal&unbalanced Independent of Direction of Rotation Elastomer bellows To DIN24960 Water Pump Shaft Helical Spring Mechanical Seal...

Model Number:70

Place of Origin:Qingdao, China

...Mechanical Seal, Ceramic Ring For Water Pump Seals, 166 O-Ring Single Spring Mechanical pump Seal Product Description O-Ring Single Spring Mechanical pump Seal Operating limits Temperature: -30°C to +200°C Pressure: ≤1Mpa Speed: ≤10/s O-Ring Single Spring Mechanical pump Seal Material Stationary Ring (Ceramic/SiC/TC) Rotary Ring (Plastic Carbon/Carbon/SiC/TC) Secondary Seal (NBR/EPDM/FKM) Spring & Other Parts (SS304/SS316) O-Ring Single

Brand Name:None

Model Number:MG1 mechanical seal

Place of Origin:China

Mechanical Shaft Seal MG1 Unbalance Single Face Single Spring Rubber Bellow Mechanical Seal Quick Details Place of Origin: China Model Number: MG1-20 Product name: Mechanical Seal size: 8-100mm Pressure: ≤-0.1~1.6MPa Temperature: -20℃~120℃ Application: water pumps Speed: ≤10m/s Standard or Nonstandard: Standard Product OEM & ODM: Accept, customizable Sample: Samples Freely leak proof mechanical seal high pressure mechanical seal mechanical...

Place of Origin:Jiangsu, China

Brand Name:KALUSEAL

Model Number:KL-CSSN

... seal life Reliable drive – Drive screws clamp directly on to shaft or sleeve to minimise drive loss Modular seal face design – Hydraulically-balanced seal face esign ensures optimum fluid film during process fluctuations Captured rotary O-ring –

Brand Name:CCO

Model Number:SC Oil Seal

Place of Origin:China

Single Lip Mechanical Seals Hydraulic Pump Oil Seal Rubber Customized Sealing SC TYPE Single lip,single spring, steel farme wrapped in rubber,rotating seal,used in the occasion of low pressure without dust and pollution.Maximum pressure 0.03 MPA(0.3/ Kgf/cm2). Material Advantages Nitrile rubber: wide range of working temperature, can work in - 40 ℃ to 120 ℃ environment, and has good abrasion resistance and aging resistance, can meet the sealing

Brand Name:lisprings

Model Number:LMS

Place of Origin:CHINA

...Springs with Plain Ends processing for mechanical seal Description: 1.MultiWave springs are made of a single filament of round-edged, pre-tempered flat wire from a continuous coil. This results in uniform diameters and wave heights. They replace conventional round wire springs...

Place of Origin:Jiangxi, China

Brand Name:ORK

Model Number:Rubber Seals, As per drawing part number

Product specification Name Gaint O-RING Material Type NBR,EPDM,SILICONE,FKM,SBR,NR,etc. Hardness Range 20-90 Shore A Color Any color is OK Size As per drawing dimensions Tolerance Standard ISO2768-M or ISO3302-1:2014 CLASS M2 Material Characteristic See ...

Brand Name:B+S

Model Number:DAS 80*60*35.1

Hydraulic DAS piston seals 80*60*35.1 Combined seals for Mechanical Hydraulic 1. The characteristics : Oil seal edge, elastomer The sealing lip short and soft with spring With dustproof lip Resistance to pressure oil seal, of a whole in the larger diameter...

Brand Name:FESTO

Model Number:MOFH-3-M5

Place of Origin:EU

...Single Solenoid Solenoid Valve Feature Value valve function 3/2 open, single solenoid lype of actuation Electric Standard nominal flow rate 46l/min pneumatic working port M5 Operating pressure 0MPa ...0.65 MPa operating pressure 0 bar ... 6.5bar Design Poppet seat iype of reset Mechanical spring Approval cuL us- Recognized(OL) Nominal size 1.5 mm Exhaust-air function Without flow control option Sealing...

Place of Origin:Zhejiang, China

Brand Name:Yomin

Model Number:Fuse 4

...single phase low voltage bakelite cut out fuse STANDARD CUTOUTS are made of high grade phenolic or resin moulding powder having high mechanical and dielectric strength, The body posses non-hygroscopic and non-tracking qualities. Electrolyic Copper with phosphor bronze back up compression springs capable of providing flawless service for years of use Features All components are inter-locked Sealing...

Brand Name:JEM

Model Number:5180

Place of Origin:changsha.hunan

Other attributes: Product Name Arc shaped spray rack assembly(5180E6) Customized support Support customization Brand Name Jieermei Component composition composed of rotating seat, rotating upper seat,vertical shaft seat, spray rod spring, end coverplate, ...

Brand Name:DESEO

Model Number:DS3000

Place of Origin:CHINA

...mechanical dock seal Material The top curtain of the door seal is standard as a single layer. For better sealing effect, double layer is optional. Anti-collision device Due to the built-in spring, the front foldable frame can be telescopically moved to prevent it from being damaged; Warning device The yellow reflective tape on the side panels guides the vehicle to the correct position. Features: 1. DESEO type door seal...

Brand Name:PRIUS,XINYI or OEM

Model Number:XMFH-5-02

Place of Origin:Ningbo,China

... principle Soft Actuation type Electrical Type of reset Mechanical spring Type of control Piloted Direction of flow Non reversible Pilot air supply Internal or external Exhaust function With flow ...