1 3d polylactic acid fiber

Brand Name:Makeit

Model Number:4*51MM

Place of Origin:Jiangsu, China

... such as corn or straw cellulose. The lactic acid is prepared into ring dimer lactide, and then the lactide is ring-opened and polymerized to produce poly lactic acid. It is not based on petroleum as raw material, with environmental protection, non-toxic,

Brand Name:Briture

Model Number:PLA fiber

Place of Origin:China

... biodegradability, PLA fiber can be completely decomposed into CO2 and H2O in nature after going out of use. Our PLA staple fibers are produced by high quality PLA section to replace the polyester fiber and the cotton fiber and are usually applied for the

Brand Name:BZY FIBER

Model Number:PLA

*, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height: 1.5;-webkit-font-smoothing: antialiased;}p[style^="text-align"] img{display:inline-block}input, button, textarea, select {font: inherit;}p, h1, h2, ...

Brand Name:PinRui

Model Number:PLA

Place of Origin:CHINA

...% new pure Polylactic Acid material. It is one of the most popular materials for 3D printing. Our PLA filament has a relatively low melting temperature, low warp properties and is biodegradable.PLA filament has a lower melting ...

Brand Name:KM

Model Number:DC-3DPT-D0064

Place of Origin:CHINA

...3D Printing Service Outer Shell Rapid Prototype Toughness Good For Electronic products PLA FDM 3D Printing Service Rapid Prototype High Strength Functional Replacement Parts --------------------------------------Technical Datas------------------------------------- PLA 3D Printing Solutions Technology FDM 3D Printer Printing thickness 0.08mm (0.003inch) Printing accuracy 0.1mm Printing material PLA(Polylactic Acid...

Place of Origin:China

Brand Name:Rontex

Polylactic Acid Fiber 5D 51mm Solid Non Silicon 1. Product Introduction Polylactic Acid Fiber is made from 100% renewable resources, such as corn. It is 100% biodegradable, compostable, eco-friendly material. Widely used for packaging, houseware, and clothing. 2. Product Features Material Renewable resources Denier 0.5D-300D Fiber...

Brand Name:Bright Pack

Model Number:B010

Place of Origin:Guangdong,China

... Features​ ​Technical Description​ ​Material & Sustainability​ ​Plant-Based Degradable Fiber​ Made from PLA (Polylactic Acid) derived from corn starch + cellulose fibers. Breaks down into CO₂, water, and biomass within 90 days in composting...

Brand Name:SFFILTECH

Place of Origin:China

...3D Space Inside Low Fiber Release Liquid Solid Separation Features 1. 3D space inside of non-woven fibers, capture small particle directly, high efficiency, low cost, large capacity of dirty particles. 2. Low temperature resistance ( PP 94 °C)(PE 135 °C) 3. Micron rating: 0.5-200um 4. Excellent resistant to hydrolysis, acids...

Brand Name:Rootsfilter

Model Number:001

Place of Origin:shanghai

...3D space inside of non-woven fibers, capture small particle directly, high efficiency, low cost, large capacity of dirty particles. 2. Low temperature resistance ( PP 94 °C)(PE 135 °C) 3. Micron rating: 0.5-200um 4. Excellent resistant to hydrolysis, acids and alkalis. 5. Smooth surface, more defined pore size and good air permeability 6. Lower fiber...

Brand Name:XINYUAN

Place of Origin:Langfang City, Hebei Province, China

Acid And Alkali Resistant PP Cartridge Was Blown Filter Cartridge Product Description: PP melt blown filter cartridge PP Melt Blown Filter Cartridge is fusing and intertwined of polypropylene resin without any chemical glues. The cartridges are glued at random to form 3D micro pore which will make the cartridge 3 layers with fine fibers in surface and coarse fibers...

Brand Name:UNT

Model Number:01

Place of Origin:shanghai

...e from Polylactic Acid (PLA), derived from renewable resources such as corn starch or sugarcane. It is produced using the spunbond process, which involves extruding molten PLA fibers onto a conveyor belt to form a web, followed by bonding the fibers thr...

Brand Name:YAOAN

Model Number:1600MM

Place of Origin:CHINA

... fabric mainly consists of polypropylene, polyurethane and polylactic acid, and the fiber diameter can reach 1-5 microns. It has good filterability, shielding, thermal insulation and oil absorption. It can be applied to medical and sanitary cloths, such as