1 4db cross directional coupler

Brand Name:Sinoscite

Model Number:CP17.7-23.55GS-3149

Place of Origin:Sichuan, China

Low Insertion Loss High Directional Microwave Microstrip Directional Coupler Quick Details 1 Product Type Coupler 2 Model CP17.7-23.55GS-3149 3 Working Frequency 17.7-23.55GHz 4 Insertion Loss ≤1.4dB 5 In-Band Fluctuation ≤0.5dB 6 Coupling 10±1.5dB 7 ...

Place of Origin:China

Brand Name:CWJ

Model Number:WL+C

... monitoring and standing wave testing. This is a four-ports configuration cross coupler. The minimum directivity is 18 dB. The coupling level can be custom made ranging from 20 dB to 60 dB. The flange type, connector type and sizes can be ...

Brand Name:INTEPON

Model Number:fiber coupler

Place of Origin:China

...coupler, 840nm, 0.4dB typical excess loss, HI 780C fiber and 780-HP fiber. The fiber couplers with special short wavelength are widely used in optical coherence tomography (OCT) application. Features Window : single window Typical excess loss : 0.4dB Directivity: ≥50dB Compact size: 3.0x54mm package size Applications OCT Raman system Specifications Parameters Unit Specification Operating wavelength Range nm 840 Typical excess loss dB 0.4dB

Brand Name:MF

Model Number:60*60mm

Place of Origin:China

...Coupler / Crossed Fastener Swivel Coupler Scaffolding 60*60mm pressed swivel couplers are used to joint two 60mm scaffolding tubes externally together. They can be flexibly built in vertical, horizontal and diagonal directions by double coupler, swivel coupler, sleeve coupler etc.. Therefore, they can be widely used in formwork scaffold and other shoring systems. Specification of 60*60mm Scaffolding Coupler / Crossed...

Model Number:90WC4-40

Brand Name:Zysen

Place of Origin:Chengdu,China

... Waveguide Cross Coupler (4 waveguide ports) Waveguide Cross Coupler, including 4 Waveguide Ports Type,3 Waveguide Ports Type and 2 Waveguide Ports+1 Coaxial Port Type, from WR28 to WR975. bandwidth 10% to 20%, coupling from 20dB to 50dB, directivity 18dB ...

Brand Name:NBSANMINSE

Model Number:PZ

Place of Origin:CHINA

...Thread). 3) Each and every pcs was tested at 10kgs/cm2. 4) Thread with PTFE coating which can seal directly without any other seal material. 1.One – Touch tube fittings are used in pneumatics piping 2.The tube fittings come in a wide variety of models to

Brand Name:AXWILL & RANLIC

Model Number:RL15-20-4

Place of Origin:HANGZHOU,CHINA

... EN 61386,Steel BS4568 G.I. conduit is manufactured from a mild steel tube,It has an accurate circular cross section,a uniformand wall thickness,a defect free interior surface.The finished threads,BS4568,conforms to the,Each length of the conduit have the

Categories:RF Directional Coupler

Country/Region:china

RF Directional Coupler Cellular 30MHz ~ 500MHz 7.3 ± 0.4dB 1W 8-SMD, J-Lead

Categories:RF Directional Coupler

Country/Region:china

RF Directional Coupler CDMA, PCS, DCS 824MHz ~ 2.525GHz 10 ± 0.4dB 15W 6-SMD, No Lead

Categories:RF Directional Coupler

Country/Region:china

RF Directional Coupler General Purpose 1MHz ~ 800MHz 20.4dB 1W 6-SMD, Flat Leads

Categories:RF Directional Coupler

Country/Region:china

RF Directional Coupler CDMA, PCS, DCS 824MHz ~ 2.525GHz 10 ± 0.4dB 15W 6-SMD, No Lead

Categories:SMD Integrated Circuit

Country/Region:china

RF Directional Coupler CDMA, PCS, DCS 824MHz ~ 2.525GHz 10 ± 0.4dB 15W 6-SMD, No Lead

Brand Name:Qifu

Place of Origin:Chongqing, China

...coupler Introduction: Cold-extruded steel bar splicing is a new form of mechanical connection. The basic principle is: insert two unconnected steel bars into a special connecting sleeve, and then use hydraulic tools to compress the sleeve in the radial direction to make the sleeve Plastic deformation occurs, so that the inner wall of the sleeve is embedded in the groove of the cross