10 watts rf termination load

Brand Name:ZD

Model Number:201

Place of Origin:China

...watt rf dummy load Termination Load (DC-3GHz) connector Specification Temperature range -40~+85°C Vibration 100m/s2 (10~500Hz) Impedance 50 OHM Frequency Range DC – 11GHz Working Voltage 2700V max Break-down Voltage 4000V rms @ sea level Contact resistance ≤0.4 OHM @ inner contact ≤1.5 OHM @ outer contact Average power 3KW max Insulation resistance ≥10000M OHM VSWR ≤ 1.10...

Categories:RF Termination Load

Country/Region:china

FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Input Power(W) 5 10 30 50 RF ...

Brand Name:ELT

Model Number:TNCA-JR-10W

Place of Origin:Shaanxi, China

...10 Watt RF Load 46mm / 1.181″ (L) TNCA RF Coaxial Termination The terminal or load provided by Xi'an Elite Electronics matches a characteristic impedance of 50 ohms. The matched load provides a terminal designed to absorb all incident power with minimal reflection, effectively terminating the characteristic impedance of the line or port. The terminal...

Brand Name:Vinncom

Model Number:VN-LD-4G-60~80W-ONM

Place of Origin:CHINA

... radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to

Brand Name:SIPU

Place of Origin:China

Model Number:N-50JR-1W

... line, making it ideal as an energy-absorbing component in high-frequency systems. Widely used for precision testing and measurement of microwave devices, RF systems, and indoor distributed terminals.

Brand Name:Terui

Model Number:2.92-50JRCG

Place of Origin:China

RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or installed on the instrument, as a transmission line electrical connection or separation of the components, mainly as a bridge. SMA interface standard: SMA RF Termination Load...

Model Number:ZCT-2RS-3

Place of Origin:Chengdu,China

Brand Name:Zysen

2Watt SMA 3GHz coaxial Termination Zysen offer DC-18 GHz, 2W terminations, available with 50 impedance SMA Male & Female connectors. With Great VSWR 1.10 Max Electrical Specifications Frequency Range DC – 3GHz Power 2W CW at 25°C (Derated linearly to 0.2W...

Brand Name:DALEE

Model Number:DL50011207

Place of Origin:Guangdong,China(Mainland)

Female SMT Type IPX High Power RF Connector rf termination load for WiFi Routers Product Details: Product name: DALEE RF Connector Secification: three generation Type : Female Certification: ISO9001,UL,ROHS and the latest REACH Voltage Rating: 60 VAC ...

Brand Name:LENOLINK

Model Number:100W RF LOAD with 4.3-10 connector

Place of Origin:CHINA

.... 4. Frequency :0-3000G 5. Connector :4.3-10 male New features 1. Integrates 2 ~8 Wireless Bands 2. More than 50~100 dB Input Isolation 3. High Average Power,Minimal ...

Place of Origin:China

Brand Name:Kimpok Technology

Model Number:KP-12TX10W

Powerful FM RadioWireless Video Audio Transmitter and Receiver 10 Watt RF Long range wireless video sender Features: 1. Wireless transmission: no need to set up communications cable 2. Image, audio sync, color black and white compatible 3. Small size, ...

Brand Name:Vinncom

Model Number:VN-LD-4G-10W-OPM

Place of Origin:CHINA

10 Watts 3.8GHz 4GHz 4.3-10 Male RF Dummy Load Termination Wide band Good VSWR Good water resistance Part Number VN-LD-4G-10W-OPm Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×37dBm) -110 / -120 Application Indoor & Outdoor Degree of Protection IP65 Operating Temperature ( ℃ ) -40 ~ + 80 Interface 4.3-10 Male Handling Power (Watt, max) 10...

Brand Name:YLT

Model Number:chip

Place of Origin:China

...Terminations 50Ω 250 watt DC-2.7GHz BeO AlN Al2O3 9.55*5.7 1. We supply various electronic components and welcome your inquiry 2. Recovery of electronic components 3. Sincerely look forward to your cooperation! Flange Termination 250 watt 50ohm RF Termination Microwave Resistor High Power Dummy Load Used and refurbished 100% DC Resistance Check Tested MILITARY/INSTRUMENTATION RESISTIVE COMPONENTS Features: • DC – 3.0 GHz • 100 Watts...

Categories:Leaky Cable

Country/Region:china

...Terminal Loader 50 Ohm 100W High Power RF Termination rf termination 50 ohm sma termination 50 ohm 50 ohm rf load termination Product Features Mainly used for matching networks in radio frequency and microwave system; Wide working band, low VSWR, and excellent anti-impulse and anti-burning performance with high power design; High protection grade. Performance Parameters Type Terminal Load...

Brand Name:Shareway

Model Number:Z9314-AL

Place of Origin:Guangdong China

400 V interwinding isolation, 1/4 Watt RF input power Z9314-AL Feature: Core material Ferrite Terminations RoHS compliant tin-silver-copper over silver-platinumglass frit. Other terminations available at additional cost. Weight 0.4 g Ambient temperature...

Place of Origin:MALAYSIA

Brand Name:ERICSSON

Model Number:PTB20260

PTB20260 is a 10 Watts, 1.8-1.9 GHz Cellular Radio RF Power Transistor. Part NO: PTB20260 Brand: ERICSSON Date Code: 09+ Quality Warranty: 3 Months Mounting Type: Screws Overview ...

Brand Name:AB

Model Number:2711P-T10C4D8

Place of Origin:USA

... PANELVIEW PLUS 6 10.4 INCH TERMINAL COLOR TOUCH W/LOGIC MODULE ETHERNET & RS-232 512 MB FLASH 512 MB RAM WINDOWS CE 6.0 W/O EXTENDED FEATURES 24 VDC 70 WATT one year warranty SPECIFICATIONS PanelView Plus 6 Operator interface, 1000 Terminal, with

Brand Name:TSL

Model Number:TSL-SA GSM

Place of Origin:China

...watts. Below are the Photos of the testing of the power. Kindly contact us for more details if you need anything. This Wireless signal Jammer also used the high quality high gain cooper ...

Place of Origin:changzhou

Brand Name:XINLIANFENGYUAN

Model Number:AC-190

F Male Terminator, RF Dummy Load 1. Low cost 2. ISO 9001 & TS 16949 certified 3. RoHS & REACH compliance 4. Made in China Features: Excellent insertion/withdrawal ...

Brand Name:Winston/OEM

Model Number:MSF - 20

Place of Origin:China,Zhejiang

...10 watt Adjustable For DC Voltage Technique parameter: Model MSF-20-5 MSF-20-12 MSF-20-15 MSF-20-24 DC output voltage current 5V 0-4A 12V 0-2A 15V 0-1.6A 24V 0-1A Wave and noise 50mVp-p 50mVp-p 50mVp-p 50mVp-p Inlet stability ±0.5% ±0.5% ±0.5% ±0.5% Load stablity ±1% ±0.5% ±0.5% ±0.5% Efficiency 68% 71% 72% 75% Adjustable range for DC voltage ±10% ±10% ±10% ±10...