100t drill collar elevator

Brand Name:TR Solids Control

Model Number:TRY

Place of Origin:Xi'an China

...Drill Tool 100 Ton Tubing Elevator Type TA Product Introduction The Elevators are hoisting tools for handling 90°shoulder drill pipe, casing, tubing and drill collar in oil and gas field. The Elevators are designed and manufactured according to API Spec 8C-Specification for Drilling and Production Hoisting Equipment. S Series side door elevators with square shoulder are suitable for handling casings in oil drilling, natural gas drilling

Brand Name:ATO

Model Number:DDZ

Place of Origin:China

Drilling Handling Tools / Type DDZ Drill Pipe Elevators (18 º TYPE ELEVATORS G SERIES) The main structure features DDZ series elevators are center latch elevator with 18 degree taper shoulder, applied in handling the drilling pipe and drilling tools, etc. The load ranges from 100 tons to 750 tons. The size ranges are from 2 3/8" to 6 5/8". Recommended technical Parameters of Type DDZ Elevator...

Brand Name:Saifu

Model Number:DD / TA 150Tons Elevator

Place of Origin:China

...Drill Collar Elevator API 8A DD/ TA Elevator The DD/TA elevator is a kind of center latch elevator, it is designed and manufacture as per API 8A and standard SY5035-2004 of Elevator links, elevators and tongs Industry. The elevator is featured with uniform strength and equipped with the safety device of spring valve. The DD / TA elevator...

Place of Origin:China

Brand Name:SHUGUANG

... fluid evenly, equal pressure, with less differential pressure sticking. JSH can provide optional slip and elevator groove to improve operation efficiency and safety. Cold-roll the upper radius to increase product life. Slip and elevator groove can be

Model Number:TA Type Elevators

Place of Origin:China

...tubing, casing and drill collars. The elevators are balanced for easy handling with safety lock and latch and guarded operating handles. Capacity range from 35 tons to 150 tons and ...

Brand Name:FORUS

Model Number:4 3/4”

Place of Origin:China

... collars and drill collars with slip grooves. Product Specifications Ф79 drill collar, Ф89 drill collar, Ф105 drill collar, Ф121 drill collar, Ф146 drill collar, Ф159 drill collar, Ф165 drill collar, Ф178 drill collar, Ф203 drill collar, Ф229 drill collar.

Brand Name:Pangolin

Place of Origin:Hebei China

... chemical composition and achieved its mechanical properties by forging. When the magnetic field strength is 1 × 105 / 4π A / m, the relative permeability μr≤1.010 of the non-magnetic drill collar. The

Brand Name:HuiChi (HC)

Model Number:Drill Collar Series

Place of Origin:China

...drill bit and improving the rigidity of the drill string. Drill collars mainly play the following roles in the drilling process: (1) Apply drilling pressure to the drill bit; (2) Ensure the necessary strength under compression conditions; (3) Reduce the

Brand Name:Topland

Model Number:31189Y10

Place of Origin:China

...m the links. the drill collar assemblies are suitable for use in combination with the perfection links . the size range is from 2 7/8 " plain to 6 5/8" IE Perfection Link Dependable, efficient perfection links are ...

Place of Origin:Jiyuan, China (Mainland)

Brand Name:KY

API Spec Non Magnetic Spiral Drill Collar Oil Field Drilling Tools Description: Drill collars are manufactured from 4145H modified steel.Drill collars are bored and drifted to API Spec 7-1 and fully heated to meet or exceed the mechanical property ...

Brand Name:Pangolin

Place of Origin:Hebei China

...Drill Collars NMDC Oil Gas Drilling Tool API Drill Collar Spiral Drill Collar And Non Magnetic Drill Collar Introduction Non-magnetic drill collars have unusual design requirements and therefore bring unique corrosion resistance issues. The drill collar is the bottom component of the drill string. The weight of the drill generates a force on the drill bit on the drill generates to make it drill in. The stiffness of the drill...

Brand Name:ROSCHEN

Model Number:9.5inch /8.25inch/8inch/6.5inch/4.75inch

Place of Origin:China

...Drill Drill Collars Spiral Drill Collars The spiral cut is added to a drill collar to prevent the likelihood of differential wall-sticking by reducing wall contact between the drill collar and the wall of the hole. The spiralling starts 22” from the bottom of the slip recess or 79” from the box end and ends 30” from the pin end. Adding spiralling to drill collars reduces the weight by approximately 4%. InterDril Spiral Well Test Drill

Country/Region:china

... ( tubuarl running equipment) for oil and gas exploration. Which includes Manual Tongs, Elevators, Rotary Slips, Safety Clamps, Sucker Rod Elevators, Single Joint Elevator etc.Haige DSC Slip is fordrill collar from 3 inch(76.2mm) to 14 inch(355.6mm) O.D..

Place of Origin:China

Non-magnetic drill collar, non-magnetic sub, NMDC NMsub Our company supplys used hdd machine such as used goodeng, used xcmg, used drillto, used dwtxs, used dilong, used Vemeer, new and used drill rod, new and used mud pump, drilling tools like barrel ...

Place of Origin:China

Brand Name:Kangyu

Model Number:ZH-JZ55-5 1/2FH

Drill Collar features: • High quality, unique material • Special medium frequency heat treatment method • Meet the requirements of API SPEC7-1 • Aadvanced super magnetic method and mechanical properties •Strict quality management system •We can provide the common drill collar, Spiral drill collar,and non-magnetic Drill Collar...

Brand Name:JCDRILL

Model Number:175*4500mm

Place of Origin:Hebei,China

... to drill pipe and centralize the drill bit. According to API Spec7-1 specifications, the material quality is 4145H that’s after heat treatment, thread hardening treatment and phosphate to better ...

Place of Origin:CHINA

Brand Name:SINOCOREDRILL

High Performance Trenchless Drilling Equipment Drill Collar Providing Weight Description Drill collar is a component of a drill string that provides weight on bit for drilling. This kind of trenchless tool is a thick-walled tubular piece that is machined...

Brand Name:Lake

Model Number:All models

Place of Origin:China

... ranges are from 2 3/8to 6 5/8 . The products shall be designed and manufactured according to the requirements in API Spec 8A/8C Specification for drilling and production hoisting equipment. Single joint elevators are designed and manufactured according to