10w 50 ohm load termination

Model Number:ZCT-10RS-18

Place of Origin:Chengdu,China

Brand Name:Zysen

10W DC-18GHz SMA connector Coaxial Termination ​ DC-3GHz, 6GHz,12GHz,18GHz are available with N connector, SMA are available up to 40GHz. Zysen also offer a series Coaxial Termination frequency up to 67GHz , Power handling from 0.5 to 2000watts,connector ...

Brand Name:Vinncom

Model Number:VN-LD-4G-200W-OPm-S-160

Place of Origin:CHINA

200 Watts 3.8GHZ 4GHZ 6GHZ 4.3-10 Male Low PIM -163dbc -165dbc RF Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is ...

Brand Name:Vinncom

Model Number:VN-DL-18G-1W-OSM

Place of Origin:China

DC-18GHz 1W SMA Male Dummy Load Better heating shrink Wide band Good VSWR Part Number VN-DL-18G-1W-OSM Operating Frequency DC-18 GHZ Impedance ( Ohm ) 50 Application Indoor & Outdoor Degree of Protection IP65 Handling Power (Watt, max) 1W Interface SMA ...

Brand Name:Customization

Model Number:50 Ohm RF Termination Load Connector

Place of Origin:China

...RF testing equipment, and microwave transmission networks. By terminating unused RF ports with a stable 50-ohm load, the device helps minimize signal reflections, reduce standing wave ratios, and protect sensitive RF equipment from performance degradation.

Model Number:LCTR1007

...termination (also known as an RF load or dummy load) designed for coaxial termination in 50 Ohm applications. Operating from DC to 18 GHz, this SMA female termination effectively absorbs incident energy with minimal reflection, preventing potential damage to devices or signal degradation. It is commonly used in RF, microwave, and millimeter wave systems to terminate...

Categories:RF Attenuator

Country/Region:china

Features: ★Wide frequency band, wide coverage ★PIM optimized design. ★Ideal for all kind of DAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) 698-3800 VSWR ≤ 1.3 ...

Model Number:YSGM333606

Product Overview The INNOTION YSGM333606 is a voltage-controlled oscillator (VCO) designed for high-frequency applications. It features a stable oscillation circuit, high output power, and superior isolation, operating within a standard 5V supply range (4....

Categories:Leaky Cable

Country/Region:china

...Terminal Loader 50 Ohm 100W High Power RF Termination rf termination 50 ohm sma termination 50 ohm 50 ohm rf load termination Product Features Mainly used for matching networks in radio frequency and microwave system; Wide working band, low VSWR, and excellent anti-impulse and anti-burning performance with high power design; High protection grade. Performance Parameters Type Terminal Load Characteristic Impedance 50Ω VSWR 50...

Brand Name:ZD

Model Number:ZD-DL-3.8GHz-10W-MM

Place of Origin:China

DC-3.8GHz 10W 4.3-10 MiNI Din Connector IBS Dummy Load RF Dummy Load Termination Product Description Operating Frequency( GHz ) 0-3.8 Impedance( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×34dBm) -110 / -120 Application Indoor & Outdoor Degree of Protection IP65 ...

Brand Name:ELT

Model Number:N-JR-10W

Place of Origin:Shaanxi, China

...reflected wave almost without reflection. According to its power capacity, it can be divided into low power and high power. Our main RF Load is low power. The coaxial load is a terminator that absorbs all incident wave power. Therefore, it is equivalent to

Brand Name:YLT

Model Number:Resistors

Place of Origin:China

... Resistors 10watts 50ohms100ohms RFR50-10 BeO AlN Al2O3​ Ceramic High Power Dummy Load Features: • 10 Watts • 50 ohms 100 ohms ± 5% • BeO AlN Al2O3​ Ceramic • Non-Nichrome Resistive Element • Welded Silver Leads (Standard Resistance):100Ω

Brand Name:BONENS

Model Number:RIG

Place of Origin:Sichuan, China

...50 ohm RF Resistor High Frequency Resistance Dummy Load Resistor product name: Electronic component passive component RF resistor 50 ohm 100 ohm 1000W flange installation terminal resistor ceramic power resistor product description: Description: RIG high power resistance is also called RIG RF resistor, RF RF resistor, high frequency RF resistor, flange RF resistor, load...

Brand Name:JYRF

Place of Origin:China

Model Number:JY-LPF-BV11R5-10W+

...10W+ LC Low Pass FilterProduct Overview JY-LPF-BV11R5-10W+ is a LC Low Pass Filter with DC-11.5 MHz passband, 50 ohm impedance in a SMT package. It offers low insertion loss and high stopband rejection, making it ideal for RF front-end and communication applications.Electrical Specifications ParameterSpecificationTest Condition Passband DC-11.5 MHz 50 Ohm...

Brand Name:KRONZ

Model Number:KRF800-A50F03B

Place of Origin:Guangdong, China

... DC–1GHz VSWR ≤ 1.25 :1 Operating Temperature -55 to +150℃ Temperature Coefficient ±150ppm/℃ Product Features High power 50Ω RF termination solution Flange mount design for secure installation Aluminum Nitride (AlN)

Brand Name:PHILIP

Model Number:M3725A

... M3725A TEST Load 50 Ohm Use For M4735A M3535A M3536A product detail: Philip Defibrillator Simulation Tester M3725A TEST Load 50 Ohm Use For :HeartStart XL M4735A ,HeartStart MR+ M3535A M3536A PN:M3725A TEST Load 50 Ohm Monitoring maintenance: Service...

Brand Name:YAGEO

Model Number:RC1206FR-073K01L

Place of Origin:China

... of PCB space z None forbidden-materials used in products/production z Halogen Free Epoxy z RoHS compliant - Products with lead free terminations meet RoHS requirements - Pb-glass contained in electrodes,

Brand Name:BOCHEN

Model Number:RIG22

Place of Origin:Chengdu

...50 ohm 100w Ceramic High Power Rf Flange 50 ohm Resistor Description The RIG22 is a high-performance power resistor engineered for applications requiring precision, durability, and superior heat resistance. Manufactured by BOCHEN, the RIG22 features a robust ceramic core structure with flame-retardant coating, ensuring excellent thermal conductivity and mechanical stability under continuous load...

Brand Name:BOGES

Model Number:ZL-NFMH-003

Place of Origin:Dongguan, Guangdong, China

...DC to 12.4 GHz . Their consistently low broadband VSWR have made them popular over the years in many applications . The N series connector is impedance matched to 50 ohm cables . Cable terminations are available in crimp , clamp and solder configurations .

Brand Name:YAGEO

Model Number:RC1206FR-073K01L

Place of Origin:China

... of PCB space z None forbidden-materials used in products/production z Halogen Free Epoxy z RoHS compliant - Products with lead free terminations meet RoHS requirements - Pb-glass contained in electrodes,