14 3 4 tricone drilling bits

Brand Name:ROSCHEN

Model Number:14 3/4"

Place of Origin:China

... RPM (r/min) 180~60 WOB(KN) 112~318 Application Soft formation with low compressive strength ,and high drill ability, such as mudstone, gypsum,

Brand Name:JS

Place of Origin:cangzhou, Hebei, China

...14 3/4" IADC 617 Tricone Bits for Hard Rock Drilling in Water well or oil drilling JSBIT tricone bits factory offers all kinds of tricone drill bits. Tricone bits are available in new and used tricone bits , steel tooth and tungsten carbide insert, in sizes from 37/8" to 36", for use in all formations, with any bearing: seal type / air type , tricone bits...

Brand Name:ENG

Model Number:535GXT

Place of Origin:China

Customized Water Well Rotary Tricone Drilling Bits Product Specifications Diameter 14 3/4" 375mm Bearing Type roller bearing/rubber seal ring Drilling cycle type Mud circulation Connection thread ty 7 5/8'' REG Formation low compressive strength, medium ...

Brand Name:GLORYTEK

Model Number:14 3-4 IADC537

Place of Origin:China

...higher than similar products; -Wide application range: it has been proved by practice that this drill bit is suitable for drilling in soft and medium hard formations, such as carbonate rock, limestone, cretaceous rock, clay rock, siltstone and sandstone. -

Place of Origin:Hebei,China

Through the action of drilling pressure and drill string rotation, the teeth are crushed and fed into the rock, while generating a certain amount of sliding and shearing the rock. During the drilling process, the cone bit not only has an impact effect, but...

Brand Name:JCDRILLS

Model Number:20inch

Place of Origin:Hebei,China

... 517 mining drilling bits for Rotary Mining Drilling IADC 214 / 215 / 216 / 217 is suitable for various formations, and achieves high RPM under low to medium WOB application ...

Brand Name:Weiye

Anti Corrosive Tricone Drill Bit Nozzle ISO9001 Certificated A02B00C00 Porosity Property of tungsten carbide nozzles for oil drill bits Density:14.7-14.9g/cm³ Hardness:≥HRA 89.0 T.R.S:≥2020n/m㎡ Porosity: A02B00C00 Advantage 1. Superior heat ...

Brand Name:MIROC

Model Number:IADC 517

Place of Origin:China

14 3 / 4 " IADC 517 TCI tungsten inserted Tricone Drill Bit Rotary Drill Bit The soft formation TCI tricone bits are used to drill low compressive strength, very soft formations. This bit maximized to use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, results in high bit penetration rates. The deep intermesh of cutter rows prevents bit

Place of Origin:Hebei,China

Brand Name:Ruida

Model Number:14 3/4（374.6mm）

Rocks Applicable Rotating Core Bits for Tricone Drilling Efficiency Boost *, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height: 1.5;-webkit-font-smoothing: antialiased;}img, picture, video, canvas, svg {...

Place of Origin:Hebei,China

High Quality Oil Well Triketone Drill Bit 14 Inch Triketone Drill Bit/Roller Cone Drill Bit/Rock Drill Bit Describe 1. Sealing and lubrication of this type of TCI tri-cone bit: high-quality O-ring, the best sealing compression and bending sealing structure...

Brand Name:Zhuzhou Jintai Cemented Carbide

Model Number:Carbide Tipped Drill Bits

Place of Origin:Hunan, China

...Drill Bits Recommended Carbide Grade Grade Grain Size(%) Binder Hardness (HRA) TRS(Mpa) Density(g/cm3) Grade Description Application Rock Drilling Conical Bits Oil Exploitation DK30.3 medium 9 88.8 2800 14.55-14.70 Can be used in mining applications where moderate toughness is required.Main application include compacts of tricone rock bits for oil and gas drilling. ● DK30.4 coarse 9 87.5 2800 14

Brand Name:FLRT

Model Number:14 3/4" FSA127G

Place of Origin:China

14 3/4" FSA127G , Milled Tooth Tricone Bit , Sealed Journal Bearing with Gauge Protection , Rotary Roller Cone Bit RECOMMENDED DRILLING PARAMETERS FOR APPLICATION Types & IADC Code 116 117 126 127 136 137 216 217 246 247 326 327 WOB KN/mm(Bit Dia.) 0.48~1.0 0.48~1.0 0.48~1.0 0.4~1.0 0.4~1.0 0.55~0.85 Lb/in. (Bit...

Brand Name:RanCheng

Model Number:Tricone Drill Bit

Place of Origin:China

...Bit 14 3/4" 17 1/2" 19" 20" API Tricone Bit Product Description High-strength and high-toughness carbide teeth are utilized to enhance impact resistance and decrease the breakage rate. The optimized design of the tooth row number, tooth number, exposed tooth height, and unique alloy tooth shape maximizes the cutting ability and speed of the drill bit...

Brand Name:JZTG

Model Number:steel tooth bit

Place of Origin:Changsha , Hunan

Tricone Bits Rotary Piling Rig Rock 10-5/8 Holder Type For Hard Rock Drilling Specification of Roller Bits Size TC Bit Dia.(mm) TC Bit No. (PCS) TC Bit Height(mm) Dia. of Roller(mm) Height of Roller(mm) Remarks 8-1/2’ 13 42 7 134 83 Both Welding and holder type are available 13 55 7 130 83 14 42 9 138 83 14 55 9 134 83 15 45 8 141 83 10-1/2’ 17 50 11 170 98 12-1/4 14...

Place of Origin:Hunan, China

Brand Name:Kellyway

Model Number:Roller Bits

... Both Welding and holder type are available 13 55 7 130 83 14 42 9 138 83 14 55 9 134 83 15 45 8 141 83 10-1/2’ 17 50 11 170 98 12-1/4 14 75 9 186 130 For Machines :The products adapt to the

Place of Origin:China

Brand Name:EST

Model Number:all types

Specifications shank adapter,rock drilling tools and mining tools, brand quality with our factory price. We supply rock drilling tools and mining tools,which include five series,more than five hundred types.They are Tapered drilling tools,Threaded ...

Place of Origin:hejian

Model Number:ALL

1)Higher tooth wear resistance Welding process was optimized,usenew welding material, make the wear resistance of teeth enhanced, optimal design of tooth structure make the tooth surface and higher tooth wear resistance Optimize the wear-resisting layer...