165mm drill button bits

Brand Name:MING

Model Number:BIT165mm-CIR150

Place of Origin:CHINA

...165mm CIR150 Low Air Pressure DTH Drill Button Bits For Rock Drilling Product category: DTH drill tools Matched hammer: Hammer CIR150 Diameter: 165mm KINGDRILLING DTH button bit description: KINGDRILLING hammer bits are used with Down-the-hole hammers for drilling holes through a wide range of rocks types. In conjunction with DTH hammers, drill hammer bits are designed with a spline drive for rotating the bit in the ground. Drill

Brand Name:ROSCHEN

Model Number:DHD360 6"

Place of Origin:GERMANY

... drill rods with API 4 1/2" REG BOX DHD360 6" dth hammer Description of dth hammer: Matched products: 89mm drill rods with API 3 1/2" REG PIN 89mm drill rods with API 3 1/2" REG BOX 114mm drill rods with API 4 1/2" REG PIN 114mm drill rods with API 4 1/2"

Brand Name:MIROC

Model Number:DTH Button Bit

Place of Origin:China

...piston is in direct contact with the drill bit, little energy is lost. This gives DTH drilling a nearly constant penetration rate regardless of hole length. Mission shank DTH Button Bit It is a kind of high air pressure DTH hammer without foot valve. It is

Brand Name:MTH

Model Number:89MM

Place of Origin:CHINA

..., through heat treatment so that it can withstand the toughest rock drilling demands, and transmit intensive impact energy into the rock with the least possible loss of energy. Application: Threaded Drill Bits cover regular, retrac and reaming types.

Place of Origin:China

Brand Name:Jinquan

Model Number:Threaded & Tapered

... rods use. It have three taper degree: 7°, 11°, 12°. It's widely used for hard rock(f=8~18) drilling use. Tapered Rock Drill Button Bits: 1) Type: Tapered button bits 2) Shank Hex.Size: 22mm,25mm 3) Diameter: 30-42mm. 4) Taper degree: 6°7°11°12° 5)

Brand Name:SUVEC

Model Number:Retrac Button Bit

Place of Origin:China

... to 260 Mpa compressive strength).Featuring spherical tungsten carbide inserts that is known to have strong configuration against carbide fracture. Thread button drill bits are made by high quality alloy steel bar and tungsten carbides.

Categories:DTH Drill Bits

Country/Region:china

...Thanks to our long year experienced technicians and engineers in the field, whom make this into reality and meet the clients' demand accurately. All hammer and bits are compatible with many products manufactured by , Atlas Copco, etc, all our products are

Brand Name:HZJX

Model Number:32/34/36/38/40

Place of Origin:China

...produced from raw materials. 2. The structure is simple and not easy to break 3. Hole straightness, high-speed deep hole drilling 4. Good flushing effect to ensure high drilling speed 2 Product Data​ of Rock Drilling Bits Raw material Alloy steel and

Place of Origin:China

Brand Name:EST

Model Number:all types

... closed to Atlas, and competitive price 5 Button bit face shape design Concave face, Convex face, Double gauge face, Flat face 6 Carbide button shape design Domed/Round button,Parabolic/Semi-Ballistic Buttons, Ballistic Button, Sharp Button, Flat Button 7

Brand Name:MIRCO

Model Number:T51 127mm drill bit

Place of Origin:China

...Drilling Button Bit Drop Center Face T51 127mm Rock Drill Bits For Sale Rock Drill bit Rock drill bits are made by high quality alloy steel bar and tungsten carbides. Through heat treatment, our drilling tools are tough enough to meet rock drilling demands and have the least loss of energy while drilling the rocks. Besides, we can design customized thread button drill bits according to different drilling application, and custom drill bits

Brand Name:SOLLROC

Model Number:T38 T45 T51 T60 T58

Place of Origin:China

...Drill Button Bits for Top Hammer Drilling Product Specification: Thread Button Bits Product Name: Thread Button bits Description: Thread Button bits Button bit Made with high quality of best quality alloy steel bar and tungsten carbide, through heat treatment like Atlas. Material: Alloy steel bar and tungsten carbide bit...

Brand Name:VKD

Model Number:Customized

Place of Origin:Zhuzhou

...button rock drill bits/drill button bits for mining Brief introduction about tungsten carbide buttons Tungsten carbide is used many drilling and mining fields. With high resistance to wear is demanded in drilling, milling, trenching and cutting. VKD offers an extensive product line, including many dimensions and shapes and which is constantly being used on drilling...

Brand Name:JCDRILL

Model Number:All Models

Place of Origin:China (Mainland)

... and wear characteristics. Specific heat treatment standards and special “stress relief” processes ensure consistent performance. DTH hammer bits are designed for maximum performance and hole cleaning ability and high penetration rate. We

Brand Name:TGC

Model Number:Tungsten Carbide Button bits

Place of Origin:China

... 2200 N/mm2 Hardness: 89.5 HRA For coring crowns, electric coal drill bits, coal cutting picks, oil cone bits, and scraping knife bits, are used in geological prospecting, coal mining, and oil well boring. ​ Our carbide button bits range: Rectangular and

Brand Name:SHITAN

Model Number:ST

Place of Origin:HEBEI CHINA

... efficiency,longer service life,better powder-discharge,better wear-resistance and impact-resistance,easier bit-back performance etc.,widely used in metal mine,quarry,tunneling,hydro-electrical engineering and so on. Features A.Independently researched and

Brand Name:Kinglong

Model Number:T45

Place of Origin:Wuhan

...button Threaded Drill Button Bits for open pit mining threaded drill bits include general, retrac and reaming three series, with stronger button-fixing ability, longer service life, better wear-resistance and impact-resistance performance, widely used in tunneling, underground mining, open pit mining, anchoring and other large-scale construction projects. Main Features 1. The threaded drill bit...

Model Number:All types

Place of Origin:China

...Drilling Mining Down The Hole DTH Hammer And Button Bits Brief Introduction of DTH Hammer: Our company is specializing in drilling rigs and drilling parts for decades. We have kinds of drilling rigs, such as DTH (Down The Hole) drilling rig, Water well drilling rig, Oil well drilling rig, Piling drilling rig with different types of Truck Mounted, Trailer Mounted and Crawler Type. For drilling...