1nm linbo3 wafer

Brand Name:BonTek

Model Number:Lithium Niobate (LiNbO3)

Place of Origin:China

Ra Roughness 1nm LiNbO3 Wafer used in Visible, Near-Infrared and Mid-Infrared Regions Lithium niobate is transparent between 0.25 and 5.3 μm. It can be used in visible, near-infrared and ...

Brand Name:zmkj

Model Number:LT-001

Place of Origin:CHINA

...substrate material is a piezoelectric crystal such quartz (SiO2), lithium tantalate (LiTaO3) or lithium niobate (LiNbO3). This are single crystal materials, which are cut out after the growth process with a defined orientation to a wafer. NQW produced this

Brand Name:Crystro

Model Number:CR21011-05

Place of Origin:China

...LiNbO3 Crystal LiNbO3 crystal combines low cost, good mechanical and physical properties as well as high optical homogeneity. Therefore, LiNbO3 wedges have been widely used in fiber isolators and circulators. LiNbO3 is also a good acousto-optic crystal and used for surface acoustic wave (SAW) wafer and A-O modulators. Crystro provides acoustic (SAW) grade LiNbO3 crystals in wafers...

Brand Name:ZMKJ

Model Number:JZ-4INCH-LNOI

Place of Origin:China

6 Inch LiTaO3 LiNbO3 Wafer Black Polarized For SAW / BAW Applications 128 Degrees Y Z-Cut Lithium niobate (LiNbO3) single crystal is a ferroelectric crystal with high electromechanical coupling coefficient and low propagation loss, which can be used to ...

Brand Name:CRYSTRONG

Place of Origin:Jinan,China

...LiNbO3 Commonly Used Material For Pockels Cells, Q-Switches Product overview: LiNbO3 Crystal is widely used as frequency doublers for wavelength > 1 mm and OPOs pumped at 1064 nm as well as QPM devices. LiNbO3 is the most commonly used material for Pockels Cells,Q-Switches and phase nodulators,wavwguide substrate,and surface acoustic wave (SAW) wafers,etc.we can provide high quality and large size LiNbO3

Place of Origin:China

Brand Name:CRYLINK

Model Number:CRYLINK-MgO LiNbO3 Nonlinear Crystal

... to its large Electro-Optic (E-O) and Acousto-Optic (A-O) coefficients, LiNbO3 crystal is the most commonly used material for Pockel Cells, Q-switches and phase modulators, waveguide substrate, and surface acoustic wave (SAW) wafers, etc. One of the most

Brand Name:KEYENCE

Model Number:SI-F series

Place of Origin:Japan

... of performance that was previously thought impossible. These micro-head sensors can be used to measure the thickness and warpage of high-precision objects such as silicon wafers. Applications: Ultra High Resolution 1nm Spectral Interference