1x2 fiber optic internet switch

Brand Name:UNIFIBER-OEM

Model Number:1x2

Place of Origin:CHINA

... reliability, low insertion loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for Optical Network, Protection, Transmitter and Receiver Protection,Network Test System and Instrumentations. Features ♦

Brand Name:Wuhan ETERN Optoelectronics

Model Number:ETERN FIBER-OPTIC SWITCH 1X1/1X2/2X2BYPASS/2X2,DUAL1X2/2X2BYPASS/2X2

Place of Origin:China

ETERN FIBER-OPTIC SWITCH 1X1/1X2/2X2BYPASS/2X2,DUAL1X2/2X2BYPASS/2X2 Performance Specification: 　 Parameter Units Single-Mode 　 Multi-Mode Operating Wavelength nm 1290~1330 and/or 1525~1610 850 or 850&1310 1x1, 1x2, Dual 1x2 dB ≤ 0.8 2x2B ≤ 0.9 ...

Brand Name:GaPho

Model Number:1X2

Place of Origin:China

OSW 1x2 Fiber Optical Switch 400 / 850 / 1310 nm Features Low Insertion Loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching Application Metropolitan Area Network R&D in Laboratory...

Brand Name:GEZHI or OEM

Model Number:GZ-Optical Switches

Place of Origin:China

...channels by redirecting an incoming optical signal into a selected output fiber. GEZHI Photonics’ 1x2 Mechanical Optical Switch support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well as

Brand Name:GEZHI or OEM

Model Number:GZ-1x1-13/15AA

Place of Origin:China

...Fiber Optic Switch Module 1x2 Optical Switches This Optical switch configurate by 1x2 type with Three fibers and two states which connects optical channels by redirecting an incoming optical signal into a selected output fiber. Its working with Singlemode wavelength 1260~1650nm or Multimode 850/1310nm. This is using a opto-mechanical proprietary configuration and activated via an electrical control signal. GEZHI 1x2

Place of Origin:China

Brand Name:HTD

1X2 Fiber Optic Switch Non-Latching Module Single Mode Features: 1. Low insertion loss 2. Wide wavelength range 3. Low crosstalk 4. High stability and reliability 5. Epoxy-free optical path 6. Latching and non-latching Application: 1.R&D in laboratory 2.System monitoring 3.Configurable OADM 4.Metropolitan area networks 5.Component testing 6.Fiber sensor Pins Definitions Pins Defining Optical...

Brand Name:New Light

Model Number:Mini Type

Place of Origin:China

...1x2 Fiber Optic Splitter, 1 in 2 out Mini Type PLC optical splitter device Fiber Optic Splitter​ Description This is a 1x2 mini type PLC splitter, one fiber in and two fibers out, we use the high quality stailess steel to make the tube. Mini Type PLC splitter is smaller in size and weight, also it's a kind of planar waveguide integrated optical...

Brand Name:Geehe Comm

Model Number:GH-FO-1×2

Place of Origin:Wuhan China

...1x2 Fiber Optic Coupler Optic Coupler Brief Introduces: 1x2 Polarization Maintaining (PM) fiber optic coupler is used for monitoring or splitting optical signals in Polarization Maintaining fiber. The coupling ratio from 1% to 99 %. Geehe as the No.2 fiber optic coupler manufacturer in Asian- Pacific region, has been proven advanced micro-optic...

Brand Name:HJY

Model Number:HJY-FSW-D1X2B-SM-2

Place of Origin:China

... an incoming optical signal into the output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. A latching version preserves the selected optical path after the drive signal has been

Brand Name:yingda

Model Number:YDPLC-AM-102-FAFA-1515

Place of Origin:china

...1x2 Fiber Optic Plc Splitter 1x2 ABS PLC Optical Splitter Module FC/APC Single mode G657A1 LSZH 2.0mm Yellow Blister Pack 1X2 ABS SPLITTER is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical...

Brand Name:ANC

Model Number:1x2 Coupler

Place of Origin:China

1x2 Fiber Optic Splitter 1310nm 1490nm 1550nm Triple Window Coupler with SC/APC Connector Description 1x2 Single Mode 1310/1490/1550nm Triple Window Coupler manufactured by ANC International Co., Limited is mainly to distribute light from a main fiber into two or more fibers. Fused Biconical Taper (FBT) Splitter is made by wrapping two fiber cores together, putting tension on the optical fibers, and then heating the junction until the two fibers

Brand Name:Begate

Model Number:1X2 mini steel type PLC splitter with SC APC

Place of Origin:Shenzhen, China

... optical signals to multiple locations for processing. In optical networks, it is often necessary to split an optical signal into many identical signals, or to combine many signals into a single signal. PLC Splitter (Planar lightwave circuit splitter) is a

Place of Origin:China

Brand Name:CY

...1x2 Fiber Optic Splitter for Network Redundancy 1x2 Fiber Optic Coupler without connectors, Steel Tube package, 0.9mm cable Optical Splitter/Coupler is an optical device that combines or splits power from optical fibers. It divides light from a single fiber into two or more fiber...

Brand Name:BT-PON

Model Number:LC-SC

Place of Origin:China

... and 64. And we produce 3 different type spliter PLC, such as micro tube, insert box type and ABS plastic box type. Optical splitter micro tube type refers to the port 0.9 mm slip-on fiber multi channel direct output with a compact design and easy to

Brand Name:KCO, Kocent Optec Limited

Model Number:FBT-MM-3.0

Place of Origin:China

...1x2 Fiber Optic Fused Splitter MM FBT Coupler​ Quick informations: Name: FBT coupler Cable diameter: 2.0mm, 3.0mm Cable length: 1.0m Terminal connecter: FC, SC, LC or optional Rate: 10/90 or customer request Pack: ABS box Description: Dual Window Wideband Couplers are high quality components designed to divide or combine optical signal in optical fiber...

Brand Name:KCO

Model Number:KCO-Mini-1x2-SCA-White-1.0

Place of Origin:Guangdong, China

...1x2 Fiber Optic Splitter PLC SC/APC 0.9mm 1.0m LSZH White Tube Description: - Fiber optic PLC splitter is based on planar Lightwave circuit technology and precision aligning process, can divide a single/dual optical input(s) into multiple optical outputs uniformly and is denoted 1xN or 2xN. - PLC splitter is applied in FTTX deployments, PON networks, CATV links and optical...

Brand Name:FOCC

Model Number:FOCC-SP007

Place of Origin:China

...1x2 Fiber Optic Planar Lightwave Circuit Splitter for FTTX / CATV Planar lightwave circuit (PLC) splitter is fabricated using silica optical waveguide technology. Fiber optic splitter and coupler are used to split or combine optical signals in various kinds of networks, it features wide operating wavelength range, good channel-to-channel uniformity, high reliability and small size, and is widely used in PON networks to realize optical

Brand Name:Seacent

Model Number:1x2 micro type

Place of Origin:Guangdong , China

...1x2 Fiber Optic PLC Splitter With SC/APC Connector Features: Low loss and stable polarization Compact design Good channel uniformity High stability and reliability Operating bandwidth:1260 - 1650 nm Certified by Telcordia GR.1209 and GR.1221 Specifications: Item 1×2 With Conn Operating Wavelength 1260~1650㎚ Insertion Loss(IL) ≤4.1 Uniformity(UF) ≤0.4 Polarization Dependent Loss(PDL) ≤0.2 Return Loss(RL) ≥55㏈ Directivity ≥55㏈ Fiber

Brand Name:ADMG

Model Number:OEM/ODM

Place of Origin:China

...Fiber Optic Membrane Switches Fiber Optic Membrane Switch Applications Discover the next level of interface design with our Durable Fiber Optic Switches, crafted to bring uniform, pristine illumination to high-end devices. These switches stand out for their consistent lighting and robustness, offering a reliable solution for sophisticated equipment. The integration of fiber optic...

Place of Origin:shenzhen

Brand Name:DYS/OEM

Model Number:70/30 coupler Optical Fiber Splitter

1x2 Fiber optic splitting ratio:70/30 coupler Optical Fiber Splitter 1. Applications: ---Telecommunication systems ---Digital,Hybrid and AM-Vedio System ---Fiber Sensors ---Monitoring system ---CATV system 2. Features: ---Uniform Power Splitting ---Compact Size --- High stabity and reliability ---Standard: Rohs Compliants ---Low insert loss ---Single Fusion Design 3. Technical specification: Parameter 1x2...