2 nitrided layer brittleness extruder screw and barrel

Brand Name:JWELL

Model Number:SJZ65/132, SJZ80/156, SJZ92/188

Place of Origin:CHINA

...Extruder Screw And Barrels 1) 38CrMoAlA(JIS SACM645) 2) 42CrMo(JIS SCM440) 1) 38CrMoAlA(JIS SACM645) 2) 42CrMo(JIS SCM440) Heat-treatment Nitriding treatment Electroplated hard-chrome finish High frequency quenching Spray bimetallic coating Vacuum quenching 1) 38CrMoAlA(JIS SACM645) 2) 9Cr18MoV 1) 38CrMoAlA(JIS SACM645) 2) 9Cr18Mo Heat-treatment Nitriding treatment Spray bimetallic coating Quideline of technique Depth of nitration layer

Brand Name:ALVEN

Model Number:Diameter 250-380mm

Place of Origin:Zhoushan

Product Description: The squeezer screw barrel is a specialized component designed for plastic film washing and drying lines. It is primarily utilized in the dewatering process following plastic recycling. Featuring a screw diameter ranging from 250mm to ...

Brand Name:JINSHUNLUOGAN

Place of Origin:Zhejiang

Model Number:Screw barrel, screw barrel

Extruder screw barrel and Single Screw Barrel for Plastic Extruder Machine SPECIFICATIONS 15mm-300mm Length/Diameter Ratio:L/D=15-55 Screw can be selected from ordinary,gradual,mutationl,pinned,separating and exhausting types. The compression ratio of ...

Place of Origin:Jiangsu, China (Mainland)

Brand Name:Jwell&Jinhailuo

Product Description Description The screws and barrels made by our company are highly precise because we use good alloy material, and it processed by the latest technology and inspection equipment of European and US.So our production is endurabale and ...

Brand Name:BLM-IV-1

Place of Origin:Jiangsu, China (Mainland)

...Nitrided Bimetallic Screw And Barrel For Extruder Machine 1 . Description Barrel Material high-quality alloy structural steel Quenched and tempered hardness HB260-280 Nitriding hardness HV950±50 degrees Nitride layer depth 0.4-0.6mm Brittleness ≤2 levels Screw...

Brand Name:Jialong

Plastic Extrusion Screw and Barrel Assembly Nitriding Treatment for Increased Productivity Product Description: The Single Screw Extruder Screw Barrel is a high-quality product designed for plastic extrusion applications. This product features a screw ...

Brand Name:GX

Model Number:GSC

Place of Origin:China

...extruder screw cylinder Ordinary nitriding parts, bimetallic pieces: Material used Fushun quality 38CrMoAlA. Ordinary nitriding parts: Screw barrel by quenching and tempering, nitriding, hardness HV850 above, brittleness is not higher than two. Tensile strength: 100kg * n / mm2, yield limit: 85kg * n / mm2 Double metal parts: screw slotted spray alloy, high wear resistance. Screw...

Brand Name:WeSeW

Model Number:W007

Place of Origin:china

Conical Twin Screw and Barrel Double Screw and Barrel for Plastic Extruder Application Film blower, Cast film machine Screw barrel material 38CrMOALA, SACM645, Sprayed dual alloy, etc. Screw diameter Φ30-Φ150 Aspect ratio L/D=15-35 Overall hardness HRC58°-...

Brand Name:Beishun

Model Number:XJD-150×16D

Place of Origin:Qingdao

XJD-150×16D Pin Barrel Cold Feed Extruder For Extruding Tire Tread And Rubber Sheet Extruder Introduction: 1; Pin barrel: The outer barrel is made of high-quality carbon structural steel, with a 38CrMoAlA high-quality nitrided steel bushing embedded in ...

Brand Name:WingsPlastic

Model Number:SJ65/33

Place of Origin:Qingdao China

...Extruder Machine Mono-layer and multi-layer sheet extrusion system for up to 5 layers Processing capabilities: PE, PP materials Intruduce of HDPE LDPE PP Sheet Making Machine 1. Single/Two/Three layers is producible 2. Extruder screw adopts special design with efficient mixing function and high plasticizing capacity.The mater of barrel and screw is 38CrMoA1A, the hardness of nitride...

Place of Origin:China

Brand Name:UT

Model Number:UT-70

...layer copper wire extrusion machine/ wire cable production line Product Description 80mm Wire Cable Extrusion machine 1). Equipment model: 80 2). Extruding output: 130 kg/hr (head open, ordinary soft PVC) 3). Screw and Screw barrel parameter: A: Screw diameter: Φ80mm B: Material: 38CrMoAlA, surface nitriding...

Brand Name:U TECH

Model Number:BST-20

Place of Origin:Jiangsu, China (Mainland)

...die. The extruder adopts gradient mixing type with high-speed energy saving design. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with

Brand Name:XPM

Model Number:20-63MM

Place of Origin:ZHANGJIAGANG,CHINA

...extruder is mainly used for making HDPE pipe diameter range from 75mm-160mm, can make single layer, two layers or 3 layers pipe, only need to work with another one or two sets of extruder and different die set Features: 1. single screw 2. quality material for screw and barrel: 38CrMoAlA, nitriding 3. screw and barrel heating: cast Aluminum heaters 4. screw