25mm s fire hazard test

Brand Name:HJ

Model Number:GW-2

Place of Origin:China

...Test Chamber Fire Hazard Testing Glow Wire Test Apparatus Standard: IEC60695-2-10 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure, IEC60695-2-11 Fire hazard testing – Part 2-11 : Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products, IEC60695-2-12 Fire hazard testing – Part 2-12: Glowing/hot-wire based test...

Brand Name:HongCe

Model Number:HVF-3

Place of Origin:China

...Testing Equipment Horizontal Vertical Flame Tester for Fire Hazard Testing Standard: UL94 Test for Flammability of Plastic Materials for Parts in Devices and Appliances; IEC 60695-11-2 Fire hazard testing - Part 1 1 -2: Test f1 ames - 1 kW nominal pre-mixed flame - Apparatus , confirmatory test arrangement and guidance; IEC 60695-11-3 Fire hazard testing – Part 11-3: Test flames – 500 W flames – Apparatus and confirmational test

Brand Name:Sinuo

Model Number:SN773

Place of Origin:China

... E, etc. The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of

Brand Name:ZL

Model Number:ZL-3029

Place of Origin:CHINA

...Test Chamber For Electrician And Electronics Fire Hazard Testing Of Products Application: The device is designed and manufactured according to the requirements of "glow-wire test method" in IEC60695-2-10: 2000, GB / T5169.10-2006, GB / T5169.13-2006 and GB4706.1 standards. It is suitable for electrician and electronics Fire hazard testing...

Brand Name:Sinuo

Model Number:SN7713A

Place of Origin:China

...Test Device IEC60950 Fire Hazard Testing Machine Complied Standards & Clauses The hot flaming oil test device conforms to Annex S.3 of IEC 62368-1: 2018, IEC60950-1:2005 and IEC60950-1:2013 clause 4.6.2, Annex A.3. Equipment Structure It is used to simulate that the flammable liquids used in electrical and electronic equipment may ignite due to overheating and leak out of the fire protection enclosure, causing electrical fires

Brand Name:PEGO GROUP

Model Number:HW-1

Place of Origin:China

... Wire Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating wire...

Brand Name:YUYANG

Model Number:YY004

Place of Origin:China

...Test/Fire Hazard Testing Apparatus Laboratory Equipment Description: Parts of insulating materials or other solid combustible materials that facilitate flame spread within the equipment may be ignited by glowing wires or glowing elements. Under certain conditions, such as faulty current through wires, element overload, and poor contact, some elements may reach a temperature that ignites nearby parts. Hot wire testing

Brand Name:vouch

Model Number:5600

Place of Origin:CHINA

...Test Apparatus Standard IEC60695 Fire Hazard Testing Automatic Instrument The Needle Flame Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. The Needle Flame Tester consists of a diameter of 0.9mm needle burner that tilts to 45degree from the vertical and is fueled with butane gas. The test...

Brand Name:DAXIAN

Model Number:DX8383

Place of Origin:China

...test machine for solid insulating materials Summary: The electrical dielectric strength tester is suitable for testing the breakdown strength and withstand voltage of dielectric, such as plastic, film, resin, mica, ceramic, glass, insulating paint and other media at power frequency voltage. Standards: GB/T5169.10,GB/T5169.13-2006 IEC60695-2-10:Fire hazard testing- Part2-10: Glowing/hot wire testing...

Place of Origin:China

Brand Name:CHENGFENG

...;Test method for heat release rate of building materials" and ISO5660-1:2002 "Test method for heat release rate of building materials". The scope of use: The oxygen consumption calculated by the oxygen concentration in the gas ...

Model Number:LR-K002

Place of Origin:China

Brand Name:Lonroy

IEC 60695 Glow Wire Test Machine Test Fire Hazard of Electronic Products 1. Test Standard IEC60695-2-10/11/12/13 <Test Methods for Fire hazard of Electrical and Electronic Products IEC60884-1-2002 "Plug and Socket for Household and Similar Purposes&...

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

...fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-annealed at a defined power (0.26W/mm) and duration (8-12 seconds). The wire is wound in five full turns around the sample at a 6mm pitch, then tested...

Brand Name:YUYANG

Model Number:YY412

Place of Origin:China

UL94 Horizontal And Vertical Combustion Tester Flammability Testing 98% Methane Description: UL-94 Flame Retardant Tester is used for the flammability testing of plastic materials such as V-0 V-1 V-2, HB, HF-1 HF-2, material or foam, and used in consumer ...

Brand Name:KINGPO

Model Number:NF-1

Place of Origin:Mainland China

...Test Equipment Needle Flame Tester Product Introduction The test machine is designed and manufactured according to the requirements of the relevant standards IEC60695-11-5, the needle-flame tester is the special instrument used for the fire hazard test of the small flame caused by the fault conditions in the simulating technology assessment equipment. It is applicable to the measurement of the fire hazard...

Place of Origin:China

Brand Name:KeRang

...test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is suitable for electric and electronic products, household appliances and other material to do fire hazard testing. It is also used in the No flame ignition source fire test to test...

Brand Name:SKYLINE

Model Number:SL-SE01

Place of Origin:China

... and solid electrical insulating materials except ceramics. Enclosures and other external parts of insulating material are subjected to the test. The ball pressure apparatus is designed to verify the quality and safety characteristics of products, as

Brand Name:GOLD

Model Number:GD-UL94

Place of Origin:China

... the early stage of fire in the environment around electronic and electrical products, and uses simulation technology to assess the fire hazard. When the surrounding of the product is on fire, it should be ensured that the fire will not spread. The test

Brand Name:AI

Model Number:GWFI

Place of Origin:CHINA

...Testing Apparatus Introduction: This Glow Wire Flammability Testing Apparatus is designed according to IEC60695-2-10: 2000 standard "glowing filament test method". It is applicable to electrical and electronic products, household appliances and materials fire hazard testing...

Brand Name:Hust Tony Instruments

Model Number:HTB-048

Place of Origin:China

..., or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of materials, products, or assemblies under actual fire conditions. This machine provides a

Brand Name:JIEDONG

Model Number:JD-3052A

Place of Origin:Guangdong, China

... and combustion performance tests on electrical and electronic products, household appliances and their materials, simulating heat sources or ignition sources such as hot components or overload resistors under ...