3 2 g cm3 si3n4 ceramic ball

Place of Origin:China

SI3N4 Ceramic Ball - Poisson'S Ratio 0.25-0.3 & Thermal Conductivity 20 W/M.K Product Description: Silicon Nitride Ceramics is a new type of ceramic material, it has unique properties such as high compressive strength (3800 MPa), dielectric strength (18-20 KV/mm), hardness (HV0.5≥1700), dielectric constant (9.2-9.6) and low density (3.2-3.3 G/cm3). It is widely used in industrial applications, such as SI3N4 ceramic ball bearings, SI3N4 ceramic

Brand Name:TOB Ceramic Bearings

Place of Origin:China

..., strong acid and alkali resistance, can be used in seawater for a long time. At 800℃, the intension and rigidity almost couldn’t be changed, whose density is 3.20g/cm3 and is the 1/3 of

Brand Name:OEM

Place of Origin:CHINA

...Cm3 Si3N4 Full Ceramic Bearings Full Ceramic Bearings of full complement balls of Si3N4 material has an add-ball gap on its side. Because using no cage design, Full Complement Balls Of Si3N4 Ceramic Bearings is able to install more ceramic balls than the standard construction, so the heavier radial load ability could be increased more. In addition, to avoid the limited of the cage material, Full Complement Balls Of Si3N4

Brand Name:CSQ

Model Number:51100 or 51200 series

Place of Origin:China

.... 2. The material of cage can be chosen among PEEK, and Brass, we can customize any material combination according to your requirement. Material Properties Units SSiC HIP-Si3N4 GPS-Si3N4 HIP-ZrO2 Density g/cm3 3.15-3.18 3.27-3.29 3

Brand Name:China

Model Number:008

Place of Origin:Suzhou,China

High Quality Silicon Nitride Ceramic Balls For Bearing Description: Silicon Nitride Ceramic Balls (Si3N4) ceramic high strength, good wear resistance, high stiffness, corrosion resistance, high temperature, suitable for high temperature structural ...

Brand Name:Cersol

Place of Origin:China

Product characteritics Silicon Nitride material is one of the hardest materials in the world with extrusion molding process and hot isostatic pressing sintering adopted during the production. Its high strength, wear resistance, temperature resistance, ...

Brand Name:ZG

Model Number:MS

Place of Origin:CHINA

... discs) are used in laboratory ball mills and attritors for grinding, mixing and alloying powders. Related Data Main component 99%Al2O3 S-SiC ZrO2 Si3N4 Physical Property Density g/cm3 3.9 3.1 6 3.2 Water Absorption % 0 0.1 0 0.1 Sinter Temperature °C