3 flute dlc coated end mill

Brand Name:ODM/OEM/OBM

Place of Origin:Changzhou

... small diameter, typically ranging from 0.1mm to 2mm. These end mills are commonly used in the production of miniature parts, such as those used in electronics or medical devices. They are also used in the creation of intricate designs and patterns on

Place of Origin:Guangdong, China

Brand Name:DROW

Model Number:UC-DLC

#detail_decorate_root .magic-0{border-bottom-style:solid;border-bottom-color:#53647a;font-family:Roboto;font-size:24px;color:#53647a;font-style:normal;border-bottom-width:2px;padding-top:8px;padding-bottom:4px}#detail_decorate_root .magic-1{width:750px}#...

Brand Name:AMG

Place of Origin:CHINA

...Flutes square Carbide End Mill For with DLC coating Introduction: The AMG 3-Flute Square Carbide End Mill with DLC (Diamond-Like Carbon) coating is a high-performance CNC cutting tool engineered for ultra-smooth, high-speed machining of aluminum and non-ferrous alloys. Combining the optimal balance of chip clearance and cutting stability, this end mill...

Place of Origin:Shandong, China

Brand Name:YingBa

Model Number:lvyongdao

Manufacturer Aluminum Milling Cutter Aluminum CNC ToolsSolid Carbide Single Flute End Mill Cnc Tool Dlc Coating End Mill Product Description This is a single-edged milling cutter for aluminum. It is forged from integral tungsten carbide material and can be...

Model Number:4F-10*25*10*75

Place of Origin:SICHUAN, CHINA

... Color DLC Coating Carbide Endmill Fresas CNC Milling Cutter For Aluminum/Copper Product Introduction: HRC55 deg Tungsten Steel 2/4 Flute Square End Mills Raw Material:Use Zigong ZK30UF,high hardness and good wear resistance. Tolerance of End Mill Diameter...

Brand Name:Betalent

Model Number:3 flute for aluminum

Place of Origin:China

... chip removal, 2, DLC coating prolongs the tool lifetime, 3, Excellent for die-casting aluminum alloy which is harder compared to other aluminum alloys, 4, Excellent for milling big spare parts. 5, Excellent for fine milling after the semi-finish milling.

Brand Name:RLD Tools

Model Number:HRC55

Place of Origin:China

... chips effectively at the high speeds at which you can run in aluminum. This is because aluminum alloys leave a large chip, and chip valleys become smaller with each additional flute on an end mill. Product name RLD HRC55 3

Categories:Flat End Mill

Country/Region:china

... mm Total Length: 38.5~100.00 mm Material: tungsten carbide application: CNC milling machine/machining center place of origin: China Brand: wxsoon OEM/ODM: According to samples/drawings Minimum Order ...

Model Number:3 FLUTES

Brand Name:KEDEL

Place of Origin:Sichuan, China

parameter value Flutes 3 Chip Flute 3 Coating DLC Shape Flat Angle 35° HRC 65° Number of Flutes Cutting Diameter (mm) Flute Length (mm) Shank Diameter (mm) Overall Length (mm) d l D L Three blades D2.3 6 D4 50 1 3 4 50 1.5 5 4 50 2 6 4 50 2.5 8 4 50 3 9 3 ...

Brand Name:JT

Model Number:JT6

Place of Origin:China

... higher hardness, stronger cutting ability, and can improve the speed and feed rate as well as increasing productivity. Specifications 1) 6 Flutes End Mills 2) Coated with TiAlN,TiCN TiN and ARCO 3) HRC Can Reach 65 Degree 4) High hardened steels and

Brand Name:BABOS

Model Number:RAM4506018060503F/RM5506015060504F

Place of Origin:China

... tool used for heavy material removal, particularly in tough-to-machine metals. Benefits of Using Coated Roughing End Mills: Extended Tool Life: The AlTiN coating significantly increase the tool’s lifespan by protecting it against heat, oxidation, and

Model Number:A380TC

Place of Origin:MADE IN CHINA

Brand Name:KTC

3 Flute High Performance End Mills For Aluminum plastic Coating Surface Raw Material K40 & WF25 TRS >4100N/mm2 Hardness >91HRA A.O.L 50mm-150mm Grain size 0.6 μm Upto HRC50 Flutes No 3F Coating TC100 Suitable for Aluminum,plastic and other materials ...

Brand Name:Metallic Cutting Tool

Model Number:16x16x32x92

Place of Origin:China

...Flute Square Solid End Mill CNC Milling Endmill Cutter For Metal Specifications Mater Carbide, Tungsten Cobalt Alloy Coating AlTiN, TiAIN, TiCN, AlTiN, TiAIN, AlTiN HRC Hrc45/Hrc55/Hrc65/Hrc70 Product Name high quality fresas milling cutter cnc carbide end mill 55hrc Shank Diameter 3-20mm MOQ 1 Piece Flute 2/3/4/6 Flutes...

Brand Name:TS

Model Number:R5*F20*100L*C10*2T

Place of Origin:CHINA

...Flutes R5 Square End Mills SX For Steel This SX series end mills is designed for workpiece up to HRC48-65 hardness grade. As actual cutting test in customer's factory, the value of the wear is lower than 0.01mm after 6-8hour processing the HRC60 workpiece with a single top point of the R5 ball nose end mill 's flute. Product Name: Tungsten Carbide Long Shank End Mills Coated: Coating...

Brand Name:Zhuzhou Jintai Cemented Carbide

Model Number:D1-D20

Place of Origin:China

...Flutes Ball Nose End Mill With Nano Coating Tungsten Carbide End Mill Tungsten Carbide end mills are a type of milling cutter, a cutting tool used in industrial milling applications. We offer a wide variety of Tungsten Carbide cutting tools including end mills and bore machining products. All products are sinter-HIP processed. This process ensures complete metallurgical integrity needed in high-performance end mill. Milling

Brand Name:BWIN

Model Number:R8*32*d16*100L

Place of Origin:China

HRC65 2 Flute 2F Carbide Ball Nose End Mills 65 Degree Nano Blue Coated Milling Cutter HRC65 2 Flute 2F Carbide Ball Nose End Mills 65 Degree Nano Blue Coated Milling Cutter Characteristic:​ Sharp blade high speed cutting Wear resistant and durable ...

Brand Name:AMG

Model Number:D4-20mm

Place of Origin:China

1. Specification Material: Solid carbide Flute Count: 12 flutes Coating (optional): TiAlN / AlTiN / TiSiN / DLC Diameter Range: Typically Ø4–Ø20 mm (custom sizes available) Shank: Straight shank, h6 tolerance Helix Angle: 35°–45° (depending on design) ...

Brand Name:Sanyinghe

Model Number:As your requirements

Place of Origin:Zhuzhou-China

...finish surface quality. 2.Excellent performance in machining titanium, stainless steel and high temperature alloys. 3.The coating provides longer tool-life or increased cutting-values. 4.Suitable for all types of steel or metal. (Order No) Flute Dia (mm)

Brand Name:Joeben

Model Number:BEM17

Place of Origin:ShenZhen

... and ball nose, without coating. 2. As the aluminum is softer, require high speed cutting. And our end mills for aluminum is single margin design, edge-line is very sharp, coating will make it dull. Besides, coating will lead to sticking to the cutters.

Brand Name:KM

Model Number:KM-55

Place of Origin:China

Product Descriptio ​​ Product Name 4 flutes CNC Milling Cutter Material Carbide Coating TIALN Feature 1. Coating witn TIALN Can Cutting Harden materiel, 3 times Durable than Carbide. 2. has good milling and cutting performance, ensure the high efficiency...