40ghz rf dummy load

Brand Name:Vinncom

Model Number:VN-DL-40G-2W-2.92M

Place of Origin:China

40GHz 2W 2.92 Male RF Dummy Load Better heating shrink Wide band Good VSWR Part Number VN-DL-40G-2W-2.92M Operating Frequency DC-40GHZ Impedance ( Ohm ) 50 Application Indoor & Outdoor Degree of Protection IP65 Handling Power (Watt, max) 2W Interface 2....

Brand Name:Vinncom

Model Number:VN-DL-40G-2W-2.92M

Place of Origin:China

40GHz 2W 2.92 Male RF Dummy Load Part Number VN-DL-40G-2W-2.92M Operating Frequency DC-40GHZ Impedance ( Ohm ) 50 Application Indoor & Outdoor Degree of Protection IP65 Handling Power (Watt, max) 2W Interface 2....

Brand Name:ZD

Model Number:ZD-DL-3GHz-300W-NF

Place of Origin:China

...RF Dummy Load with 50 Ohm RF dummy load introduction: N male RoHS Aluminium black oxide dc 3GHz 5W 50 ohm RF dummy load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load...

Brand Name:ELT

Model Number:K-JR-0.5W

Place of Origin:Shaanxi, China

RF Load 0.5 Watts DC-40GHz K(2.92mm) Male VSWR ≤ 1.3 Chip Resistor RF load/termination (also known as a dummy load) from Xi'an Elite Electronic is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, etc. Our coaxial radio requency load termination is manufactured in a RF load design. The low-power matched RF load

Categories:RF Termination Load

Country/Region:china

FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) 350-6000 VSWR...

Place of Origin:changzhou

Brand Name:XINLIANFENGYUAN

Model Number:AC-190

F Male Terminator, RF Dummy Load 1. Low cost 2. ISO 9001 & TS 16949 certified 3. RoHS & REACH compliance 4. Made in China Features: Excellent insertion/withdrawal ...

Place of Origin:Sichuan, China

Brand Name:Sinoscite

Model Number:SNSD

Waveguide Aluminum Material Silver-plated Matched Load Components Quick Details Place of Origin:Sichuan, China Brand Name:sinoscite, Microwave Material:Aluminum material, silver-plating Applications:Microwave test Characteristic:Compact, full bandwidth, ...

Model Number:ZCT-10RKA-40

Place of Origin:Chengdu,China

Brand Name:Zysen

10Watt 2.92mm coaxial Termination Zysen's 10W Wideband (DC-40 GHz) Millimeter Wave terminations available with 50 impedance & 2.92mm Female/Male connectors. With Great VSWR 1.15 Typ. High integrity. Electrical Specifications Frequency Range DC – 40GHz ...

Brand Name:LENOLINK

Model Number:LD10-DIN

Place of Origin:CHINA

... termination to properly terminate the output port of a device or to terminate one end of an RF cable. Lenolink Termination loads are characterized by low VSWR, high power capacity and performance stability. Widely used for GMS/DCS/UMTS/WIFI/WIMAX etc.

Brand Name:BONENS

Model Number:RIG Resistor

Place of Origin:Sichuan, China

...RF Resistor High Frequency Resistance Dummy Load Resistor product name: Electronic component passive component RF resistor 50 ohm 100 ohm 1000W flange installation terminal resistor ceramic power resistor product description: Description: RIG high power resistance is also called RIG RF resistor, RF RF resistor, high frequency RF resistor, flange RF resistor, load RF resistor, RF...

Brand Name:Kaixiang

Model Number:AC400V - 500kW

Place of Origin:China

..., generator sets for all main electrical parameters including the dynamic parameters tested. Application AC400V - 500kW Dummy Load Bank can be used with a computer to realize automatically completing the special test and the intelligent control to all

Brand Name:DALEE

Model Number:DL50011209

Place of Origin:Guangdong,China(Mainland)

High Power RF Connectors 1-4 generation 100 watt dummy load with gold flash Product Details: Product name: DALEE RF Connector Secification: 1-4 generation Type : Female Certification: ISO9001,UL,ROHS and the latest REACH Voltage Rating: 60 VAC ...

Brand Name:ZENITHSUN

Model Number:DRLB

Place of Origin:China

50kW 650V-1000V,DC Portable Variable Resistive Dummy Load Banks Cabinet Structure 1.An assembly-type enclosure contains DR series or DQ series or AS series or other high power rating ...

Brand Name:Terui

Model Number:SMA-50JRN-50JR-18A

Place of Origin:China

RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or installed on the instrument, as a transmission line electrical connection or separation of the components, mainly as a bridge. SMA interface standard: SMA RF Termination Load...

Place of Origin:Hebei,China

Brand Name:Triumph Load

Model Number: AC400-200KW

...Dummy Load Bank offers the most robust, high-capacity designs in the industry. Generator Testing Dummy Load Bank is setting the standard with intelligent operator controls, safety indication layouts, adjustable load step resolution, and lightweight designs. Generator Testing Dummy Load...

Brand Name:YLT

Model Number:Terminations

Place of Origin:China

...DC-12.4 Max VSWR1.25 21×33.5mm Coaxial fixed terminationsabsorb RF＆ microwave energy and are commonly used as dummy loads of antenna and transmitter. Also used as mach ports in many multiport microwave devices such as circulators and directional couplers...

Model Number:H

Brand Name:haozhuo

... to any size requirements Can be placed on desks or workbenches Can be installed with RF accessories When a shielded room is necessary? · If your lab is near a broad spectrum emitter (i.e equipment that transmits multiple frequencies under 400Hz),

Brand Name:Original Factory

Model Number:925-138J-51P

Place of Origin:CN

Connectors 925-138J-51P 40GHz RF Connectors 50Ohm SMPM Connector Jack​ Product Description Of 925-138J-51P 925-138J-51P: 50Ohm RF Connector, SMPM Straight PCB Full Detent Jack, Through Hole. Features​ Of 925-138J-51P Nominal impedance: 50Ω ...

Brand Name:SIPU

Model Number:BNC-50JR-1W

Place of Origin:China

...RF Termination Load – 1W Power Rating Product Overview This coaxial termination load is designed for precision RF and microwave system testing. It ensures proper impedance matching and signal absorption, helping prevent reflections and system damage. Ideal for use in RF signal transmission lines, microwave instruments, and wireless communication systems. Application Scope RF...