5s turn cold bend testing apparatus

Brand Name:HJ

Model Number:HDX1307

Place of Origin:China

... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a

Brand Name:PEGO GROUP

Model Number:PG-CBT

Place of Origin:China

Cold Bend Test Apparatus IEC60811-1-4 for Cable Made by SUS304 Stainless Steel 1. Introduction The cold bend test apparatus is designed according to IEC60811-1-4 clause 8.1 and figure 1, IEC60884-1, VDE0472, GB2951.4 and GB2099-94. It is applied to the test...

Brand Name:Kingpo

Model Number:KP-CB02

Place of Origin:China

...Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer diameter less than or equal to 12.5mm round wire and cable or round insulated wire core is the wire and cable industry to test the bending...

Brand Name:HongCe

Model Number:HDX1307

Place of Origin:China

... bending performance of wire and cable at low temperature. The equipment is mainly composed of low temperature thermostat, winding device and material testing system. It is suitable for circular wire and cable with outer diameter less than or equal to

Brand Name:Sinuo

Model Number:SN2307

Place of Origin:China

Cold Bend Test Apparatus For Cables ≤Ø 12.5mm IEC60811-1-4 Clause 8.1 And 8.2 Product description: This device is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a major axis dimension up to and including 20 mm. According to the standard IEC60811-1-4 clause 8.1 and 8.2, common test...

Place of Origin:China

Brand Name:KeRang

... (d) of the test piece (mm) Number of turns D≤2.5 10 2.5﹤d≤4.5 6 4.5﹤d≤6.5 4 6.5﹤d≤8.5 3 8.5﹤d 2 Test condition: The diameter of the mandrel shall be between 4 and 5 times the diameter of the test piece. Standard equip with the mandrel :

Brand Name:MIYU

Model Number:MY-XC-C6

Place of Origin:China

180-degress, Wire/Cable Bending Tester (MY-XC-C6), with competitive price, both OEM and ODM available from us Technical Specification 1. R angle :R3,R5,R12.7, replaceable fixture 2. Test speed: 5-60 times / min, adjustable 3. Test times:99999999 times 4. ...

Brand Name:SHC

Model Number:SC-DJR

Place of Origin:China

... for cold bend test of the circular insulation wire core whose diameter is small and the sector-shaped insulation wire core which can not be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the