650nm fiber visual fault locator 1mw 5mw

Brand Name:HYX

Model Number:HYX-005

Place of Origin:China

Visual Fault Locator 5mw fiber checker 1mW 5mW 10mW 20mW 30mW 50mW Visual Locator Fiber 5mw Ftth Optic Tool Kit Fiber optic visual fault locator adopts 650nm laser diode as a light emitting device,the output power can be up to 1mw-20mw. It’s applied to single-mode or multi-mode fiber...

Place of Origin:Zhengzhou,China

Brand Name:Hua Yu

Model Number:HY-16

... 650nm laser diode as a light emitting device, the output power can be up to 1mw-30mw. It’s applied to single-mode or multi-mode fiber measurements.HY-16 uses 3pcs of 1.5v AA battery for power supply, making up the deficiency which power supply time for

Model Number:DW-VFL-2

Place of Origin:Zhejiang, China

Brand Name:DOWELL

...Fibers Visual Fault Locator with Metal Body Visual fault locator is used for the measurement in single mode or multi-mode fibers. It features a rugged design, a universal connector and an accurate measurement. Specification: Wavelength 650nm ± 20nm Output Power 1mW 10mW 20mW 30mW 50mW Dynamic Distance 2~ 5km 8~12km 12~15km 18~22km 22~30km Mode Continuous Wave (CW) and Pulsed Power Supply AA * 2 Fiber...

Brand Name:No

Model Number:FKEQU-109

Place of Origin:China

...Fiber Laser Pointer 30KM VFL Pen 650nm Transmission Visual Fault Locator Introduction: 650nm visual fault locator has the function of fiber identification and faults locator of SM or MM fiber, it is a helpful assistant to dead zone of OTDR, it is also a basic maintenance tool for fiber network, LAN, ATM fiber...

Brand Name:FOCABLE

Model Number:Visual Fault Locator VFL650-2S

Place of Origin:China

Fiber Optic Test Equipment Pen Type Visual Fault Locator VFL 5mW General information Visual fault locator emits a bright beam of red light easily visible from a distance. Connect the VFL to one end of a fiber then locate that fiber at the other end, even if it one of many fibers either in a cable or terminated in a rack. Perform simple end-to-end continuity checks. Verify the proper polarity and orientation of fibers within a multi-fiber

Brand Name:KCO, Kocent Optec Limited

Model Number:KCO-VFL-30

Place of Origin:China

...designed for field personnel who need an efficient and conomical tool for fiber tracing, fiber routing and continuity checking in an optical network during and after installation. KOCENT OPTEC LIMITED can supply the VFL with 5mW, 10mW, 20mW, 30mW and 50mW.

Model Number:SX-VFL650

Place of Origin:China

Brand Name:ODM/OEM

#detail_decorate_root .magic-0{width:750px}#detail_decorate_root .magic-1{overflow:hidden;width:750px;height:200px;margin-top:0;margin-bottom:0;margin-left:0;margin-right:0}#detail_decorate_root .magic-2{margin-top:0;margin-left:0;width:750px;height:200px...

Brand Name:KCO, Kocent Optec Limited

Model Number:KCO-VFL-08

Place of Origin:China

...Fiber Visual Fault Locator Red Laser Pen 1mW 5mW Descriptions: - The KCO-CFL-08 Series visual fault locator is used for the measurement in single mode or multi-mode fibers. - Light source is strong, penetrating power is strong - This red pen imported laser head - Easy to penetrate 100 thousand meter fiber...

Brand Name:FOCC

Model Number:FOCC - VFL8001

Place of Origin:China

1mw Red Laser Light Fiber Optic Cable Tester Visual Fault Locator Checke for 10KM FOCC this kind of Visual Fault Locator short for VFL,its a handheld optical test device used to inject a highly vision laser light into a fiber,for detection of bends,faults,continuity or port identification. Part NO. VFL8001 Central Wavelength 650nm ± 10nm Output Power 10mW Battery Operating Time 650nm...

Brand Name:TAKFLY

Model Number:Fiber Optic Tool VFL

Place of Origin:Shenzhen, China

1mW VFL Visual Fault Locator FTTH Fiber Optic Tool/Tester Pen-type Red Light Source Fiber Optic Tool VFL - Features: Bright red laser at 650nm Pulsed and CW operation Standard AA alkaline batteries Rugged and weatherproof design Fast locate the broken point; Fiber Optic Tool VFL - Specifications: Wavelength 650nm±10nm Light source FP-LD laser Output power 1mw, 10mw, 20mw, 25mw, 30mW (optional) Distance ≥1km for 1mw...

Brand Name:KNT

Model Number:KNT-VF1MW

Place of Origin:WUHAN

1MW - 10MW Fiber Optic Visual Fault Locator Pen / Visual Fault Detector We use MWQ-LD as the emitting component of 650 series fiber fault locator. Driven by constant current source, the indicator can emit stable red laser. The product can be used to inspect fiber failure when they connect with optical interface and be inserted into single mode or multi mode optical fiber. It is indispensable tool in fiber project constructing, fiber...

Brand Name:Wangtong

Model Number:VFL

Place of Origin:China

..., Fiber transmitter setup, fiber product manufacture and research etc. Its red light source which used high quality 650nm semiconductor laser as a light emitting device, through the constant current drive, transmit the red light which power is stable.

Brand Name:Dawnergy

Model Number:DA-VFL Visual Fault Locator

Place of Origin:CHINA

...the optical fiber. It is the ideal tool for optical fiber testing. Features Portable size and easy to carry 650nm visible laser source Suitable for various optical fibers Applications Telecommunication networks Cabling systems Manufacture and research in

Brand Name:Fibery

Model Number:VFL10MW

Place of Origin:China

...be up to 1mw-50mw. It’s applied to single-mode or multi-mode fiber measurements.In the meantime, you can use SC/ST adapter and do not need to configure the conversion interface furthermore, it can optionally connect all frequently-used ...

Brand Name:YINGDA

Model Number:BML-206

Place of Origin:china

Fiber Optical Visual Fault Locator BML-206 10mw 1mw 15mw 20mw 25mw 30mw Sc Fc Connector FEATURES: Bright red laser at 650nm Pulsed and CW operation 50 hours of operation(typical) Standard AA alkaline batteries Rugged and weatherproof design 2.5mm ...

Brand Name:KEXINT

Model Number:BOB-VFL650-5S

Place of Origin:shenzhen china

... who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical networks. And it is the essential test tool for the FTTH project. This visual fault locator is with so many advantages, such as long woking life,

Brand Name:CY

Model Number:VFL

Place of Origin:Shenzhen

...a helpful assistant to dead zone of OTDR, it is also a basic maintenance tool for fiber network, LAN, ATM fiber system and telecom network system. 2. Functions and feature --Support CW and 2Hz modulation work mode --Solid: use special laser end ...

Brand Name:OMC or OEM

Model Number:1mW VFL-205

Place of Origin:China

1mW VFL-205 Fiber Optic Tools Pen Shape Visual Fault Locator With 2.5mm Universal Adapter VFL-205 Pen Shape Visual Fault Locator is a compact but powerful fiber optical cable test tool, with an output power up to 1mW, which can be used to locate sharp bends & breaks in jacket or bare fiber within 5km. It can also be applied to identify the connectors in patch panels and identify the fibers...

Model Number:Fiber Optic Tools Kit

Place of Origin:China

Description: Visual Fault Locator Specification Type Data Output Power >1mW 5KM Wavlength 650nm 2Hz Yes Connetor Universal Connector Battery AA2 Storage Temperature -20---+70 Working Temperature -10---+60 Laser Type LD Weight 178g Dimensions 168mm27mm ...