8 0mm single wall heat shrink tubing

Brand Name:Long

Model Number:3.0mm

Place of Origin:China

...0mm Light Blue Thin Wall Halogen Free Flexible Heat Shrink Tubing Ultra thin wall halogen free.flexible well. Heat shrink tubing with low moq and short time from China manufacture. Features • Thin wall without adhesive can be used easily. • Flexible • Halogen free • Flame retardant • Continuous operating • Temperature:-55°C to 125°C • Fully shrink...

Brand Name:UPTTOGETHER

Model Number:HWPC

Place of Origin:Jiangsu, China (Mainland)

...Wall Heat Shrink Tube HWPC HWP , φ30-φ350mm , Color Black 1. Product Introduction Heavy wall heat shrink tubing is made of polyolefin materials whose properties are modified through special ionizing radiation process with electronic accelerators. It is flame retardant and highly insulating with a relatively thicker wall than normal single wall tubing...

Place of Origin:China

Brand Name:KINGTONE OEM

Model Number:2：1 Single Wall Heat Shrink Tube RSFT-135G(3X)

... Retardant Low smoke generation if buring Shrink temperature: 120℃ Description: Heat shrink tubing (or, commonly, heat shrink or heatshrink) is a mechanically expanded extruded plastic tube ordinarily made of nylon or polyolefin, which shrinks in one

Brand Name:TORICH

Model Number:SAE J526

Place of Origin:CHINA

...Single Wall Bundy Tube 1.Standard SAE J526 Welded low-carbon tubing EN10305-6 Welded cold drawn tubes from hydraulic and pneumatic power systems ASTM A254 Copper-brazed steel tubing 2. Steel Grade BHG1, SPCC, SPCD, SPCEN, ST14, ST15, ST16, DC04, DC05, DC06 3. Heat Treatment BK or NBK 4. Specification O D/ mm 4 4.2 4.76 6 6.35 7.8 8 9.52 W T 0.5-1.0mm...

Brand Name:Sino-Media

Model Number:ROHS RA SMA PLUG RIGHT ANGLE RG316 CABLE OEM/ODM

Place of Origin:China

ROHS RA SMA PLUG RIGHT ANGLE RG316 CABLE OEM/ODM Parameter Description Test 100% OPEN, SHORT TEST. Operating Temperature Range -40°C to +85°C. Velocity of Propagation 80%. Voltage Withstand 1000 Volts. Bend Radius Repeated: 1.102 inches, Installation: 0....

Brand Name:Standard

Model Number:DN125*3m

Place of Origin:China

St52 Seamless Concrete Pump Pipe /Single Wall Pipe/3m seamless tube st52 seamless pipe is single wall tube , material is usually is 16Mn and Q345B, which is usually used on stationary pump. Our st52 seamless pipe information as below : Name st52 seamless ...

Brand Name:OEM Produce

Model Number:3:1

Place of Origin:Hangzhou, China

...Low Voltage Rated Voltage: 600V Tensile Strength: 10 MPa Min. Shrink ratio: 3:1 Single wall: without adhesive Approval: UL Min shrink temperature: 70℃ work temperature: -45℃ to 125℃ Flammability: VW-1, UL 224 color: black, red, green, all colors are

Brand Name:KCO, Kocent Optec Limited

Model Number:60mm, 45mm, 40mm

Place of Origin:Guangdong, China

60mm Fiber Optic Protection Sleeves Heat Shrinkable Tube Fiber Optic Protection Sleeves Heat Shrinkable Tube: - Fiber Optic Protection Sleeves Heat Shrinkable Tube is used for protecting and supporting the fusion splice point. - Single fiber to maximum 12 ...

Brand Name:ZHEJIANG YINGFENG

Model Number:LC connector

Place of Origin:China

LC Duplex 3.0 Mm Connector For FTTH Patch Cord The LC LC Connector contains Dust Cap, Outer Housing, Ferrule Assembly, Spring, Inner Frame, Clip, Riveting Ring, Heat Shrink Tube and Boot. This LC connector (Lucent Connector / Little Connector) product is ...

Brand Name:OEM/ODM

Model Number:Customized

Place of Origin:CHINA

0.6mm Copper Tube Bending Machine Increased Heat Tranfering Rate Specification 1 Tube Material Copper tube / Aluminum tube /Bundy tube 2 Tube Diameter Φ3-12mm 3 Tube Wall Thickness 0.3-1.0mm 4 Bending Capacity Single tube 5 Bending Angle 1~180 degree 6 ...

Brand Name:Unique-Tel

Model Number:JXH08

Place of Origin:China

Single Fusion 144 Fiber Round Dome Splice Closure Fiber Optic Splice Enclosure Description JXH08 Fiber Optic Splice Closure, Heat Shrink Cable sealing, four pre-installed 24-splice trays Single-ended, O-ring sealed dome closure for splicing feeder and ...

Brand Name:Chengjiu

Model Number:304 304L 321 2520 2205 2507 316L 309S

Place of Origin:China

...Wall Pipe Industrial Pipe Best Buy Stainless Steel Tubes Seamless Pipes Hollow Section Grooved Cold Drawn ASTM A312 304 304L 316L Thickness 9.0mm​ 304 stainless steel pipe is not rust, corrosion resistance, heat resistance, high temperature and low temperature resistance, high hardness and high strength single...

Brand Name:OEM

Model Number:LC/UPC-LC/UPC-24F-8.0-5M

Place of Origin:CHINA

... meets strict flame-retardant specifications for use in HVAC areas above ceilings and beneath floors. It comes with a Kevlar pulling eye and heat shrink tubing for wire fishing through