anti abrasion centrifugal slurry pump

Brand Name:Aier

Model Number:WA,WG,WY,WZ,WL

Place of Origin:Hebei, China

... power,. It has large capacity, high head, multi-stages in series to remove & sludge and to transfer liquid-solids mixture slurry , based on the experience of slurry pump design and manufacture for many years, and abstracting the research results of

Brand Name:CNSME

Model Number:8/6E-R

Place of Origin:CHINA

Anti-abrasive Mining Robust Slurry Pump Centrifugal Rubber Lined Introduction: The application and features of 8/6E-R: 8/6E-R is cantilevered, horizontal, centrifugal slurry pumps. The capacity is 324-720m3/h with head 7-49m. The imleller is 5 closed vans with diameter 510mm. Brief Introcustion to Pump Type Selection: Refering to the performance curves of the pump the selected capacity range should be as follows: Pump...

Brand Name:SHIZA

Model Number:2 / 1.5B-(R)

Place of Origin:China

...-resistant rubber liners, and impellers can also apply wear-resistant metal material or wear-resistant rubber material. The HH type slurry pumps only apply wear-resistant metal material as their pump bodies and

Brand Name:Chengdu Yongyi

Model Number:ZJ

Place of Origin:Sichuan, China

...-belt drive. The rotational kinetic energy converts into the hydrodynamic energy of the fluid flow, centrifugal Slurry Pumps motivate fluid flow along pipelines. The fluid enters axially into the pump impeller, which by its rotation acts tangentially and

Place of Origin:China

Model Number:G

...Anti-Abrasive Long Life High Chrome Iron Cast Mining Slurry Pump Slurry pump description Slurry pump are cantilever horizontal centrifugal slurry pump.They are widely used in industry of mining, electrical power, metallurgy, coal, environmental, etc for transportation of abrasive solid slurry.Mud pump, impurity pump, dredge pump and desilting pump are all belong to category of slurry pump...

Brand Name:TM

Model Number:150-LP

Place of Origin:China

... pump is divided into LP type and LPR type, with the same structure. The LP type flow parts and shaft are made of metal material, Which is suitable for conveying abrasive slurry. LPR type flow parts are lined with abrasion-resistant rubber, suitable for

Brand Name:Hydromatic

Model Number:1.5/1C-HH 1.5/1C-HH

Place of Origin:China

... coal, power, building material and other industrial departments etc. AH(R), HH are also called heavy duty slurry pumps, are used to transport the strong abrasive high density or low-density high head slurry. under the allowable pressure, the pumps of

Brand Name:AIPU Solids

Model Number:APYZ

Place of Origin:China

... centrifugal pump, which is able to deal tough and abrasive duties. The term slurry pump is considered a generic term, to separate from other type centrifugal pump, this one mainly use to intended for clear liquids. That is used as a feeding pump for the

Brand Name:DENOR

Model Number:DNR-AH

Place of Origin:China

... pumps is widely used in industrial sectors such as mining, coal, metallurgy, power, building materials, etc. to transport strong abrasion and high concentration slurry. This series of slurry pumps can be suitable for various working conditions and is

Brand Name:Gempump

Model Number:14/12ST-AHGEM

Place of Origin:Shijiazhuang,China

...handle the liquid with abrasive solid particles and extend the wear life Max, increase the mean time between failures with lowest maintenance by reasonable component arrangement!!! 1. The ...

Model Number:LSB Series Vertical Slurry Pump

Place of Origin:China

...Centrifugal Slurry Pump LSB Vertical Sand Pump LSB Vertical Sand Pump Descriptions: LSB vertical sand pump,which is also called vertical centrifugal slurry pump,is applicable to transmission of abrasive slurry. Submerged in liquid,the pump operates in a pond or pit.The level of slurry circulated in a slurry pond shall be not lower than the center of pump...

Brand Name:HUATAO

Model Number:Slurry Pump

Place of Origin:China

...Centrifugal Pump with Competitive Price for Water Sludge Coal Washing The slurry pump is a kind of cantilever centrifugal pump. It adopts horizontal frame and bears a casing structure of axially vertical with double open, the inner liner is made of metal or rubber, which has good abrasion...

Brand Name:TR Solids Control

Model Number:TRSB5*4-13J

Place of Origin:Xi'an,China

...Pump. It is the ideal matching equipment to provide impetus for desander, desilter and Jet mud mixer. Centrifugal pump can also be an assistant mud infusion pump and trip pump at well head location. TR centrifugal pump can realize the quick positioning and

Place of Origin:China

Brand Name:China Coal

...Pumping Equipment WA Centrifugal Slurry Pump Slurry Pump for Mining WA Centrifugal Slurry Pump, Centrifugal Slurry Pump,Slurry Pump Specifications of WA centrifugal slurry pump Pump range: 25mm to 450mm (1’’ to 18’’) Capacity: 4-5400m3/h Head: 5-118m Wet part material commonly is 27Cr white iron alloy or rubber Other material can be produced as per your specific application. Features of WA centrifugal slurry pump...

Place of Origin:Sichuan，China

Brand Name:XBSY

...). Featuring patented mechanical seals (​​Patent ZL200720079857.2​​) with ​​6x longer service life​​ than standard seals, it minimizes leakage risks in abrasive slurries. The compact ​​1806×528×884mm dimensions​​

Brand Name:Paragon

Model Number:CJ

Place of Origin:China

...the impeller and the balance hole is on the back shroud of the impeller. The axial thrust of some pumps is not big enough, so there is no wear ring and balance hole at the back of the impeller. Feature: 1. Each model has different flow rate and head lift.

Brand Name:APK

Model Number:QK

Place of Origin:Henan China

...Anti-abrasive Dewatering Water Mine Submersible Pump Mine submersible pump overview: Flow: 30-500m3/h Head: 100-900m Power: 30-2200kw Temperature: <20℃ Mine submersible pump applications: Draw underground water from deep wells Drain water in mines, such as gold ores, silver ores, coal mines The electric mine submersible pump is mainly used for the drainage of the central pump...