api reg thread down the hole hammer

Brand Name:SOLLROC

Model Number:SD Series Hammer

Place of Origin:China

...Hammer with API REG Thread for Water Well Drilling Product description: A Down the hole drilling is the most critical component on a drill rig, and the DTH system has numerous advantages over other options. DTH drilling offers several advantages over top-hammer drilling for larger, deeper holes in medium-hard formations. Because the hammer is at the bottom of the hole, power loss is minimal as the hole...

Brand Name:MING

Model Number:Drill pipe 76MM-1000/3-3/8 API REG

Place of Origin:CHINA

...API Drill Rod 3-3/8 API REG Thread Drill Pipe For Rock Drilling Product category: Drilling PIPE Threaded Connection: API 3-3/8 API REG Length: 1000mm KINGDRILLING DRILL PIPE DESCRIPTION: DTH drill rods, also known as drill tubes or drill pipes, are the parts that provide a pass for air flow and transfer impact force and rotating torque to DTH hammers and bits. They are employed in water well and blast hole

Brand Name:JCDRILLS

Model Number:HD35

Place of Origin:Hebei,China

3.5inch API REG Thread High Air Pressure DTH Hammer for Water Well Drilling 90 - 110 mm Dia Application It is a kind of valveless high air pressure DTH hammer with foot valve. The rock hammer has the fellow advantages 1: Valveless air distribution. more ...

Brand Name:MIROC by KSQ

Model Number:DTH Drill Pipe

Place of Origin:China (Mainland)

6mm Thickness 152mm Diameter Seamless Down the Hole Drill Pipe with 4 1/2'' API REG Thread Product Description: DTH Drill rod is made of high quality material detected by spectrograph, impact and tension test. With fully digitized processing line ...

Brand Name:MIROC

Model Number:DTH drill pipe

Place of Origin:China

...API Reg Thread DTH Drill Pipe Length 1000mm - 6000mm Description In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH drilling a nearly constant penetration rate regardless of hole length. DTH drilling enables drillers to reach hole depths that are double of what top hammer

Place of Origin:Zhejiang, China

Brand Name:Sanrock

... COP54/DHD350 COP64/DHD360 COP84/DHD380 Hole range(mm) Φ90-Φ110 Φ110-Φ135 Φ135-Φ155 Φ155-Φ190 Φ195-Φ254 Connection thread API 2 3/8” Reg API 2 3/8"Reg API 2 3/8"Reg API 3 1/2"Reg API 4 1/2"Reg API 3 1/2"Reg API 2 7/8"Reg Working pressure 1

Place of Origin:China

Brand Name:Super Diamond

Model Number:DHD,QL,Mission,SD

Advantages: 1. Our products can match over 95% against the original products. 2. High quality raw material, with premium hardened procedures for long life. 3. Full production chain to secure stable and prompt production leadtime. 4. Experienced senior ...

Brand Name:GLORYTEK

Model Number:76mm 89mm 102mm 114mm Drill Rods

Place of Origin:Beijing

Thread Connector Water Well Drilling Drill Pipe for Well Drilling 1.Description: -Standard Water well drill pipe: Diameter: 76mm, 89mm, 102mm, 114mm, 127mm, 140mm, 152mm Length: 1000mm, 1500mm, 2000mm, 3000mm, 5000mm, 6000mm Thread: 2 3/8" API REG, 2 7/8" ...

Brand Name:Jinquan

Model Number:DTH drill pipes outer diameter:76mm, 89mm, 102mm, 114mm; DTH drill pipes thread sizes:2 3/8" API Reg, 2 7/8" API Reg, 3 1/2" API Reg, 4 1/2" API Reg, 2 3/8" API IF, 3 1/2" API IF; DTH drill pipes length: 1000mm, 1500mm, 2000mm, 30000mm, 6000mm.

Place of Origin:China

DTH Drill Pipes: DTH drill pipe out diameter: 76mm, 89mm, 95mm, 102mm, 112mm, 114mm, 127mm etc.; DTH drill pipe thread sizes: 2 3/8”API Reg, 2 7/8” API Reg, 3 1/2” API Reg, 4 1/2” API Reg, 2 3/8” API IF, 3 1/2” API IF; DTH drill pipe length: 1000mm, 1500mm...

Brand Name:ROSCHEN

Model Number:Mach 120 Mach 122 Mach 132

Place of Origin:China

Mach 120 Mach 122 Mach 132 DTH Hammer 12” Mach 120 Mach 120 has a working pressure range of 170-350psi(12-24bar) whilst its optimum performance is reached at air pressures of 200psi(14Bar) and above. Mach 120 has no liner which increases the 140kg piston’s...

Brand Name:MTH

Model Number:QL80

Place of Origin:CHINA

...Hammer For Rock Drilling Down The Hole Drilling Description: “DTH” is the short for “Down The Hole” and sometimes it is also called “RAB” in some markets, “RAB” is short for “Rotary Air Blasting”. Specifications: Description Thread connection Outside diamete Rec. hole size Shank style Working pressure Length without bit, Weight without bit shoulder to shoulder mm inch mm inch bar psi mm inch kg lbs QL 80 STD API 4 1/2 Reg...