api welding drill pipe

Brand Name:Longway

Place of Origin:China

...Drill Pipe 102mm 4" 2-7/8"REG API Water Well Drill Pipe Introduction We have advanced friction welding, drill pipe thickening equipment and various forming technologies and processing equipment. According to customer requirements, we can produce American standard drill pipes...

Brand Name:MIROC

Model Number:API DTH Drill Pipes

Place of Origin:China

...rig. The key features of a high quality DTH tube are durability, accuracy and manageability. Sinodrills DTH drill pipes are made of superior alloy and the both thread ends are friction welded to the seamless steel pipe.The high pressure air is delivered to

Brand Name:ATO

Place of Origin:CHINA

...API 5DP drill pipe tool joint/drill pipe sub for well drilling 1:Tool Joint: NC26, NC31, NC38, NC40, NC46, NC50 2:Type of Tool joint: NC, IF, FH, XH, REG 3:Material: 40Cr, 35CrMo, 4137H Tool joints are short sections of pipe that are attached to the tubing portion of drill pipe by means of using a flash welding process. The internally threaded tool joint is called a “box”, while the externally threaded tool joint if the “pin” API

Place of Origin:China

Brand Name:Tantu

Model Number:Tantu141227

...Drill Pipe/Oil Casing Drilling Pipe/API 5DP Drill Pipe by Tantu NC50 API Drill Pipe by Tantu Oil Drill Pipe & Water Well Drill Pipe Flat Drill Pipe & Geological Drill Pipe Non-dig Drill Pipe & Drilling Joints OUR JOB IS TO SERVE... KEY WORDS: Drill pipe 114.3 x 8.56 mm G-105, NC50-168, 3x95, 3mm standard API SPEC 5; group strength (steel grade) G-105 API 5DP 127 *9.19mm drill pipe *G105* NC50 We can supply all kinds of drill

Brand Name:ROSCHEN

Model Number:W, J Series

Place of Origin:CHINA

...Drill Rod, API-Series Drill Pipe, W-Design, T-Series Flush Joint Casing Threaded Subs, Adapters for J-Series, W-Design Drill Rod, API-Series Drill Pipe, W-Design, T-Series Flush Joint Casing Threaded Subs and Adapters for J-Series or W-Design Drill Rod, API-Series Drill Pipe & W-Design or T-Series Flush Joint Casing Available from ROSCHEN for DCDMA specified J-Series or W-Design Drill Rod, API...

Place of Origin:China

Brand Name:Kangyu

...drill pipe We can supply all kinds of drill pipes that are consistent with API SPEC 5DP or SY. Drill pipes can be made as customers' requirements and be equipped with the same type of tool joints. We can supply all kinds of drill pipes that are consistent with API SPEC 5DP or SY. Drill pipes can be made as customers' requirements and be equipped with the same type of tool joints. Advanced drill pipe production lines can transfer the welding

Place of Origin:China

Brand Name:SHUGUANG

...API 5DP, API Q1, API Recommended Practice 7G-2 ii. OD: 2 3/8" to 6 5/8" or 60.32mm to 168.28mm iii. Grade:G105,S135,E75,X95, iv. Wall Thickness: (0.25-0.50) inch or (6.45-12.70) mm v. Length: R1: 6.10-7.01m; R2: 8.84-9.75m; R3: 12.19-13.72m vi. Upset style: IU, EU, IEU DRILL PIPES IN SELL .Drill Pipe Processing Equipment Company Information Jiangsu Shuguang Huayang Drilling...

Brand Name:SANROCK

Model Number:76mm*2m Drill Pipe

Place of Origin:Zhejiang, China

...drill pipes play a significant role in all DTH drilling, regardless type of rock, hole depth or drill rig.DTH drill pipe is mainly used in the drilling blasting hole, guardrail hole, mountain reinfrcement, anchoring and other engineering holes in mines,quarris, high ways, railways and so on. Feature: 1.Pipe body : cold draw seamless pipe . so the pipe...

Brand Name:MIROC

Model Number:DTH Drill Pipe

Place of Origin:China

...Drilling Tools API Standard Drilling Pipe with Wrench Flat In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH drilling a nearly constant penetration rate regardless of hole length. Product Name: DTH drill pipe...

Place of Origin:china

Brand Name:oilfield/OEM

Model Number:2-3/8"~7-5/8"

...Drill pipe for water well, oil well, geothermal well drilling, geological research drilling, etc. Speifications of drill pipe 2-3/8''(60.32mm) 2-3/8''(60.32.mm) OD Grade RSD Weight Designation Wall thickness OD of joint Inch mm Inch mm Inch or mm 2-3/8'' 60.32 E75,X,G,S NC26 6.65 0.280'' 7.11 API...

Brand Name:SHITAN

Model Number:ST

Place of Origin:HEBEI CHINA

...Welding Drill Pipe For Water Well Drilling /Friction Welding Drilling Rod Drilling Pipe For Well Drilling 1.Description Friction welding drill pipe is connected by using two drill pipe friction welding technology together, (under the influence of pressure, through to friction welding...

Brand Name:NO

Model Number:Φ50 Φ60 Φ73 Φ83 Φ89 Φ102 Φ114 Φ127 Φ140 Φ168

Place of Origin:CHINA

... elasticity. Dia from 42mm to 140mm. Length from 0.5m to 9.6m. Steel grade: E75/R780,G105,S135 We can make the drill rods for Vermeer,Case,Ditch Witch, Drillto, Gudeng, Xugong HDD machines, such as D16X20, D24X40, D50X100, D75, D80, ...

Brand Name:SHITAN

Model Number:ST

Place of Origin:HEBEI CHINA

... influence of pressure, through to friction welding workpieces near the interface and its temperature, make the material produces plastic deformation, accompanied by a material to produce plastic flow, through the interface of ...

Brand Name:HuiChi (HC)

Model Number:Drill Pipe Series

Place of Origin:China

...drill pipe produced and sold by our company Huichi Petro is an indispensable key equipment in oil drilling operations. It is used to connect the drill collar with the square drill pipe or top drive, transmit rotational power and drilling fluid (mud), drive the drill bit to break the formation, and withstand various complex stresses during the drilling...

Brand Name:TR Solids Control

Model Number:TRYB

Place of Origin:Xi'an China

API Oilfield Drill Pipe Power Tong Dies and Inserts Product Descrption Xi'an TianRui Petroleum Machinery Equipment Company Limited provides you with an warranty as below: Our Power Tong Dies Inserts are 100% interchangeable with OEM design, including BJ, ...

Brand Name:SINOCOREDRILL

Model Number:BQ NQ HQ PQ

...Welded Drill Pipe with DCDMA Thread for Deep Core Drilling Product Description: Introducing the Wireline Core Drill Rod, a versatile and essential tool for your drilling operations. This high-quality drill rod is designed to meet the demanding requirements of various drilling projects, offering exceptional performance and durability. The Wireline Core Drill Rod is available in a range of diameters to suit different drilling...

Brand Name:safepetro

Model Number:drill pipe

Place of Origin:china

...2FH, 6 5/8FH Internal coating Hardbanding TK34,TC2000 Arnco 100XT, 200XT, 300XT Production specification 1) Certificate: API 5DP-0002,API Q1-0964, ISO 9001,ISO 14001,OHSAS 18001 2) OD:2 3/8” TO 6 5/8” of label 1 3) Wall thickness:6.45 to 12.7mm 4)