astm e662 nbs smoke density chamber

Brand Name:GOLD

Model Number:GD-ISO5659

Place of Origin:China

...ASTM E662 NBS Smoke Density Chamber Versatile Fire Testing Instruments Introduction: The NBS smoke density test chamber is a cutting-edge fire safety instrument engineered to meet rigorous international standards, including ISO 5659-2 and ASTM E662. Designed for precise measurement of smoke optical density and toxic gas extraction, this chamber...

Brand Name:LAB TECH

Model Number:SDB

Place of Origin:China

... accepted apparatus for the measurement of smoke from burning materials and measures specific optical density under flaming and non-flaming conditions. It is also used for the extraction of toxic gas. This equipment is satisfied with standards (ASTM E 662,

Brand Name:SKYLINE

Model Number:SL-7602

Place of Origin:China

3 Phase Flammability Testing Equipment , NBS Smoke Density Chamber Standards According to NBS ENS711 of ASTM E662 etc. Used range This tester has been applied to determine smoke density and wildly accepted by many industries, such as plastics, rubbers, ...

Brand Name:YUYANG

Model Number:YYF036

Place of Origin:China

... characteristics of vehicle interior and inflammable cable. Measure the optical density of smoke when a certain thick specimen is exposed to a heat source of 50KW/m2. Standards: ISO 5659-2 Plastic smoke generation, determination of optical density by a

Brand Name:ZL

Model Number:ZL-1049

Place of Origin:China

ASTM E662 Burning Smoke Density test Chamber / Materials Smoke Density Testing Machine Temperature Measuring Device: A temperature sensor is installed on the inner surface of the door at a height of 1.5M from the ground and 0.5M from the wall. Monitor the ...

Brand Name:HAIDA

Model Number:HD-R909

Place of Origin:Guangdong, China (Mainland)

Smoke Density Tester Description: Smoke Density Tester is an instrument used to measure smoke density, mainly used for measuring smoke density during the combustion of building materials and their products. It evaluates the density of smoke by measuring...

Brand Name:Haida

Model Number:HD-R909

Place of Origin:China

Smoke Density Tester Description: Smoke Density Tester is an instrument used to measure smoke density, mainly used for measuring smoke density during the combustion of building materials and their products. It evaluates the density of smoke by measuring...

Brand Name:YUYANG

Model Number:YYF027

Place of Origin:China

... from test sample when test sample of certain thickness is exposed to heat source(2.5W/cm2, 2KW/m2 using by ASTM E 662 furnace) or fire in a chamber. Using ISO 5659 conical radiant heat furnace, we can change the heating condition from 10KW/m2 to 5KW/m2 or

Brand Name:AI

Model Number:SDB

Place of Origin:CHINA

NBS Smoke Density Chamber Introduction The Smoke Density Test Chamber has proved to be one of the most versatile fire testing instruments since its inception in the 1980s. It is the most widely accepted apparatus for the measurement of smoke from burning materials and measures specific optical density under flaming and non-flaming conditions. It is also used for the extraction of toxic gas. Structure of Chamber 1, The NBS Smoke Density...

Brand Name:DAXIAN

Model Number:DX8368

Place of Origin:China

... in the vertical position in thicknesses up to and including 1 in. (25.4 mm). The test chamber is approximately 3 feet (915 mm) high, 3 feet (915 mm) wide, and 2 feet (610 mm) deep, encompassing a volume of about two-thirds of a ...

Brand Name:Hust Tony Instruments

Model Number:HTB-036

Place of Origin:China

HTB-036 NBS Smoke Density Chamber for Standard ASTM E662 Application NBS smoke density chamber measures the optical density of smoke when a certain thick specimen is exposed to a heat source of 25KW/50KW/. It is widely employed in assessing performance of ...

Brand Name:vouch

Model Number:5920

Place of Origin:China

Smoke Density Test Apparatus of Plastic Material Model:5920 Main configure: 1.)17inch touch control computer main engine 2.)America NI software design platform 3.)Import heat flow 4.)Import electrical control part 5.)Import temperature sensor 6.)Sus 304 stainless steel porcelain enamel processing 7.)RAL9002 standard colour paint on outer container size 914*914*610mm Standard ISO5659-2,ASTM E662...

Brand Name:HOOHA

Place of Origin:China

... the box body is in the open fire, Smoke density test chamber can measure the smoke density. This instrument is suitable for E ASTM 662, BS6401, ISO5659, NES 711, NEPA258 and other standards. This test is more and more used for the internal material of

Brand Name:lixian

Model Number:HZ-Building Material Fire Tester-7

Place of Origin:CHINA

...Smoke Density Test Chamber Smoke Density Test Chamber Description: The Federal Aviation Administration's FAA-approved NBS Smoke Density Test Box meets all the latest FAA test standards and numerous aerospace test standards such as BSS 7238, BSS 7239, AITM 2.0007, AITM 3.0005, etc., while meeting domestic aviation testing. Standards, such as the HB6577 smoke density test standard. Smoke Density...