astm footwear testing equipments

Brand Name:Gaoxin

Model Number:GX-5041

Place of Origin:China

ASTM F 609, HG/T 3780-2005 Standard Footwear Testing Equipment for Heel Lift Abrasion Resistance Test 1.Quick Details: Alternative name Heel Lift Abrasion Resistance Tester Function Test abrasion resistance of heel lift Feature Portable and manually Weight 8kg Volume 68×20×26 mm Corresponding test standard ASTM F 609, HG/T 3780-2005 2.Description: Heel lift abrasion resistance tester is specialized for testing...

Brand Name:Lixian

Model Number:HZ-3609

Place of Origin:China

Footwear Testing Equipment Martindale Friction Tester DIN-53863 Footwear Testing Equipment Summary This machine is testing wear-resistance property of textiles, footwear, etc. ... testing 4 specimen at the same time, At testing the hammer mill alway change its orientation (lissajious), repeated abrase specimen until reach a certain times and then to measure its frictional property. Footwear Testing Equipment Corresponding Standard BS-3424,ASTM

Brand Name:SKYLINE

Model Number:SL-L06

Place of Origin:CN

ASTM-D1052 ISO-5423 Ross Flexing Tester Footwear Testing Equipment ASTM-D1052 Ross Flexing Tester Instrument introduction Install the shoe sole strip test piece or the whole shoe sole on the ROSS tortuous testing machine, make the incision fall directly above the center of the shaft of the ROSS tortuous testing machine, and drive the test piece or the whole shoe sole on the shaft for 90 degrees of freedom through the ROSS tortuous testing...

Brand Name:HTI

Model Number:HTX-060

Place of Origin:Guangdong,China(mainland)

... leather and other materials or finished products, and to understand the situation of materials or finished products to adapt to cold climate or cold regions. Standard: ASTM-D1790, D1593, JIS-K6545, the HB-T2877 Specification: Temperature range: -50 ° C

Brand Name:HAIDA

Model Number:HD-B609-1

Place of Origin:Guangdong, China (Mainland)

... and nonwoven fabric yarn tensile breaking strength and breaking elongation of determination Introduction Build-in printer Microcomputer Servo Tensile Testing Equipment is widely used in wires & cables, hardware, metal, rubber, footwear, leather, apparel,

Place of Origin:CHINA

Brand Name:YOUBI

Model Number:UP-4025

... impacts to the heel tip . A heel is subjected to blows, each of specified energy, delivered by a pendulum once a second. Testing continues until failure of the heel takes place or until satisfactory fatigue resistance is obvious. Standard: BS-5131 4.9

Brand Name:YUYANG

Model Number:YYX-010

Place of Origin:CHINA

...sole materials. Widely used in rubber tire, chariot tracks, sole, etc. of the rubber products abrasion resistance test, It’s a good Is to assist the industry to control the product quality. NBS Rubber specimen Abrasion Tester standard It's according to

Brand Name:HAIDA

Model Number:HD-P936

Place of Origin:China

... resistance performance of outsole, forepart and heel can be evaluated accordingly. The principle The item of footwear to be tested is put on a surface, subjected to a given normal force, and moved horizontally relative to the surface( or the surface is

Brand Name:Great Win

Model Number:GW-034B

Place of Origin:CHINA

...testing machine/equipment (GW-034B) • Brief introduction: This machine is used to test the bonding strength of the toe caps. Inspection on the soles and uppers, with steady increase of separation forces make soles and uppers separation, to test the peeling strength between the separations to assess the quality of shoes. • Technical Specifications: Model GW-034B Shoe peeling strength testing...

Brand Name:Btutest

Model Number:BGD

Place of Origin:Made in China

...ASTM Paint Testing Equipment Standard: ASDM D 2794 ISO 6272.2 ISO 6272.1 GB/T 20624.2 GB/T 20624.1 Description: Compared with traditional paint film impactors, these two impactors are equipped with various weights and punches with different diameters. Through different combinations, they can simulate the impact resistance of the coating in various applications and adapt to a wider range of industries.Paint Testing Equipment

Brand Name:AI

Model Number:XP-2

Place of Origin:China

...loss of light transmission in test chamber, it can measure smoke density of burning and decomposition of building material during test. Features: The test chamber is Teflon coating, to resist the corrosion of smoke released during burning. Light source is

Brand Name:BOTO

Model Number:BT-UV-ZW

Place of Origin:CHINA

... Ozone Aging Test Chamber Salt Spray Test Chambers IP Enclosure Proof Test Chambers High-low temperature test chamber Rapid-Rate Thermal Cycle Chamber (Rapid temperature test chamber ) Walk-In Temp Humidity Chamber (constant temperature wet laboratory )

Brand Name:ZL

Model Number:ZL-1803

Place of Origin:China

... JIS ECE EN ASTM Helmet Testing Equipment Product Overview This Safety Helmet Anti-Static Tester is designed for comprehensive helmet testing according to international standards including JIS, ECE, EN, and ASTM. The equipment is widely used by special ...

Brand Name:HOOHA

Model Number:A8KV-ASTM

Place of Origin:China

A8KV - ASTM Electronic Test Equipment , High Voltage Insulation Material Electronic Testing Tools Scope of application: Applies to electrical and electronic products, household electrical appliances and materials of electric mark and erosion test, ...

Brand Name:YUYANG

Model Number:YYT011C

Place of Origin:China

Toy Tester Small Parts Test Cylinder Stainless Steel Wear Resistance Toys Testing Equipment Application: mall Parts Test Cylinder is used to determine whether Child-related products & other articles intended for use by children under 3 years old present ...

Brand Name:ASLI

Model Number:AS-DT-150

Place of Origin:China

Testing Equipment Drop Tester Machine For Carton Packaging Drop Test With ASTM Standard Testing Equipment Drop Tester Machine For Carton Packaging Drop Test With ASTM StandardProduct Description Product Name Free Fall Packaging Drop Tester Machine Max. Weight of Test Samples 60Kg Height of Drop 300~1500mm Max. Dimension of Test Sample W1000xH800xD1000mm Falling Floor Size W1700xH50xD1200mm Drop Method Face, edge, angle Test...

Brand Name:Sinuo

Model Number:SN8810C

Place of Origin:China

...Test Equipment Salt Fog Test System for Automotive Components Complied Standards & Clauses This test chamber meets the requirements of ES 5454, GJB150A, ASTM B117, ASTM B368, ASTM B380, ASTM D1735, ASTM D2247, ASTM G85 A1, GM4465P, ISO9227, DIN 50021, PV1210, NES M0007, 33 (CCT-1 method),etc. Product Overview The SN8810C Walk-In Salt Spray Corrosion Environmental Test...

Brand Name:DAXIAN

Model Number:DX8685

Place of Origin:China

... that are intended to be installed in ducts,plenums,and other spaces used to transport environmental air without the cables being enclosed in raceways in those spaces. Standards: UL910, ASTM E84-20. ASTM E84​

Brand Name:LIYI

Model Number:LY-3020

Place of Origin:CHINA

..., wafer processing and manufacturing industries as well as scientific research units, quality inspection departments and schools. Meet standards: GB 9639,ASTM D1709,JIS K7124 Characteristics: 1.In accordance with national standards and

Brand Name:Shengtai Instrument

Model Number:SH0248BS

Place of Origin:China

...Testing Equipment is designed to test the quality of diesel fuel according to the ASTM D6371 Standard. The resolution of this testing equipment is 0.1℃, and its power supply is AC220V/50Hz. It weighs 45Kg and its size is 650 * 480 * 620mm. It also comes with an output function, so that it can be equipped with a U Disk at the same time. This Diesel Fuel Testing Equipment is ASTM...