aws a5 24 zirconium bar welding wire

Brand Name:JINXING

Model Number:Zirconium Welding Wire

Place of Origin:China

Zirconium Welding Wire 0.8mm/1.2mm/1.6mm/2.4mm standard AWS A5.24 Zirconium is resistant to boiling points in sulfuric acid and higher than the boiling point. Its concentration can reach 70%. Zirconium can resist certain highly corrosive environments ...

Brand Name:PRM

Model Number:Custom

Place of Origin:China

... information: Name Zirconium alloy welding wire Grade ERZr-4 Zr60705 Diameter φ1.0 φ1.6 φ2.4 φ2.0 φ3.2 φ4.0 Density 6.51g/cm3 Purity >95.5% Surface pickling surface Standard AWS. A5.24 Chemical Content Of Zr705 Zirconium Welding Wire: Content Zr...

Brand Name:WUXI SYLAITH

Model Number:C11000 C10200 C12000 C12200

Place of Origin:Jiangsu China (Mainland)

Silver-Coated Annealed Round Copper Wire Gas Shielded Mig Welding Wire AWS A5.18 ER70S-6 Gas Shielded Mig Welding Wire AWS A5.18 ER70S-6 Standard: GB/T ER50-6/ DIN SG2/ JIS YGW12 AWS ER70S-6/ BS A18/ EN G3Si1 Gas Shielded Mig Welding Wire AWS A5.18 ER70S...

Brand Name:Changsheng

Model Number:AWS A5.16

Place of Origin:China

... and anodizing, where parts are hung or tied down with wire. “Ti” Wire- AWS A5.16 Titanium ERTi-7 Welding Wire for TIG welding is cut to 36″ lengths and is also available in common welding rod sizes. Specification of our AWS A5.16 Titanium ERTi-7

Brand Name:XL-TITANIUM

Place of Origin:China

...wires we supply can only be round cross section and made from titanium bars by rolling or drawing. They can be delivered in straight, coil or spool according to your requirements and related specification. These materials can also be furnished as polished,

Brand Name:JUYE

Model Number:ER309L

Place of Origin:Zhejiang,China

...wire rod diameter 5mm~38mm for welding purpose Main Specification Size: 5mm~38mm Coil weight:from 500kg to 2500kg Standard:AWS A5.9 Materials:ER309L Grade :A B C according to the attached tollerance table Application:for welding Tolerance accordiing to the attached the table. Tolerance Table Diameter (mm) Tolerance(mm) Ovality(mm) Grade A Grade B Grade C Grade A Grade B Grade C ≥5.0~10 ±0.30 ±0.25 ±0.15 ≤0.50 ≤040 ≤0.24...