boiler membrane wall with manifold header

Brand Name:HDB

Place of Origin:China

... tubes, arranged around the boiler corner. Inside is the flowing water or steam, and the outside accepts the heat of the flame in the furnace of the boiler, mainly absorbing the radiation heat of the high temperature combustion products in the furnace. The

Brand Name:SANCO

Model Number:Membrane wall

Place of Origin:China

... of refractory and tubes in a water-tube boiler. The tubes are evenly spaced and generally connect to headers which in turn are connected back to the main generating bank of the boiler. They serve a two fold purpose here in that they capture heat that

Brand Name:ORL Power

Model Number:Customization

Place of Origin:Zhangjiagang,Jiangsu,China

...tubes in a water-tube boiler.The tubes are evenly spaced and generally connect to headers which in turn are connected back to the main generating bank of the boiler.They serve a two fold purpose here in that capture heat that would otherwise escape to the

Brand Name:Dehai Boiler

Model Number:Boiler Header

Place of Origin:China

... from the generating tubes is collected in headers which are therefore always under pressure. This pressure may vary from 300 psi to 2000 psi. Since headers are always under pressure, the utmost care is taken by us while fabricating them. Depending on the

Brand Name:HDT

Model Number:HDT SA106

Place of Origin:China(Mainland)

... Boiler Tubes with Pickling for Manifold Headers SA106 273X22.5MM ASME Product Name Seamless Boiler Tubes with Pickling for Manifold Headers SA106 273X22.5MM ASME Grade SA106 Standard ASTM Certification ISO,SGS, BV Brand China brand SIZE OD : 6-650 mm Wall...

Brand Name:SAT-CHAM

Model Number:Boiler header

Place of Origin:China

Maintenance and Inspection of Boiler Header What is a drop header? Dropped vs. Raised Headers – Trus Joist Technical Support A "dropped header" is a header that is installed below the roof or floor framing with a short wall (knee wall) between the header...