bs476 part 12 flammability tester

Brand Name:Delta

Model Number:BS476-7

Place of Origin:China

...the standards for BS 476-7, the method of the test to determine the classification of the surface spread of flame of products. BS476-7 Direct Flame Impingement Building Material Flammability Tester is mainly used for the determination of the extension of

Brand Name:YUYANG

Model Number:YY130

Place of Origin:China

...Flammability Tester Product Description: Single Cable Vertical Flame Propagation Tester IEC60332, EN50086 Introduction: The instrument is for vertical flame propagation of single cable testing; It can also measure the combustion condition of melting dropping Standards: IEC 60332-1-1,2,3 EN 50086-1-1994 GB/T 18380.11,12...

Brand Name:AI

Model Number:DFI

Place of Origin:China Mainland

...12 Ignitability Tester is designed according to the BS476-12:1991. Method of test for ignitability of products by direct flame impingement.The accuracy of the Ignitability tester meets the requirements of relevant standards and meets the control requirements for the accuracy of measurement. Standards: BS 476-12:Fire tests on building materials and structures - Part 12...

Brand Name:SKYLINE

Model Number:SL808

Place of Origin:CHINA

Fire Propagation Index Tester with Stainless Steel Support Frame and Calcium Silicate Board Combustion Chamber Product introduction BS 476 part 6 specifies a method of test, the result being expressed as a fire propagation index, that provides a ...

Brand Name:DAXIAN

Model Number:DX8299

Place of Origin:China

BS476-7 Surface Flame Spread Test Apparatus BS476-7 Product introduction: The flame spread tester is developed and produced according to the BS476-7 standard, and is used to measure the lateral flame spread performance of building products. The speed of ...

Brand Name:HJ

Model Number:GW-2

Place of Origin:China

... wire tester is your first line of defense against fire risks. We know that behind every electronic and electrical product is a commitment to consumer safety. This test equipment designed for plastics, ...

Brand Name:HOOHA

Model Number:ZY6014J-GB

Place of Origin:China

ZY6014J-GB Ul Flammability Testing For Optical Fiber Line GB / T19216.11 - 2003 Meet the standard: It conforms to GB/t19216.11-2003 / iec60331-11:1999 "cable in flame condition" Line integrity test part 11: test device, the flame temperature is not lower...

Brand Name:Sinuo

Model Number:SN772

Place of Origin:China

...-2-12, IEC60695-2-13, it is required by IEC 60598 Clause 13.3.2., UL746A, etc. Equipment Overview The SN772 Glow Wire Test Apparatus is a ...

Brand Name:Sinuo

Model Number:SN772

Place of Origin:China

...11, IEC 60695-2-12, IEC60695-2-13, it is required by IEC 60335 clause 30, IEC 60598, UL746A, etc. This device simulates the thermal stress test of ...

Brand Name:SHC

Model Number:SC-45FTE

Place of Origin:China

...Flammability Test Equipment Standard: EN71, ASTM D1230, CRF 16-1610, CALIF TB 117, FTMS191-5908 Parameter: Time Display 0-99.9S Test box 37cm*22cm*35cm, top 12 vents with a diameter of 12.7mm Resolving Capability 0.1S Ignition time 1s or set it Set arbitrary Dimensions 40*25*54cm Power AC 220V / 50Hz / 2A Description: ASTM D 1230 45 Degree Combustion Tester...

Brand Name:PEGO GROUP

Model Number:PG-NF

Place of Origin:China

IEC60695-11-5 Needle Flame Flammability Testing Equipment - 12 Months Warranty 1. Introduction The Needle Flame Tester consists of a dia.0.9mm needle burner that tilts to 45 degree from the vertical and is fueled with butane gas. The fire hazard of the ...

Model Number:LR-K002

Place of Origin:China

Brand Name:Lonroy

IEC 60695 Glow Wire Test Machine Test Fire Hazard of Electronic Products 1. Test Standard IEC60695-2-10/11/12/13

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

Hot-Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-...