c section

Brand Name:LKS or customized

Model Number:K12

Place of Origin:China

... display: easy to use, take cash and print ticket at same time. Five section three gear lock cash box: Multi-section cash box, with special area to put bill and coin. Water proof and endur-able keyboard: Multi-function keyboard, save ...

Brand Name:LINK-PP

Model Number:6367035-1

Place of Origin:Guangdong,China

6367035-1 Position SFP Cage, Upper Section Connector Snap Fit Free Hanging (In-Line) Part Status Active Connector Style Cage, Upper Section Connector Type SFP Number of Positions - Mounting Type Free Hanging (In-Line) Termination Snap Fit Features EMI ...

Brand Name:Carrier

Model Number:69NT40-511-318

Place of Origin:USA

... section, and the center access panel allows access to the thermostatic expansion valve and evaporator coil heaters. The unit model number, serial ...

Brand Name:Flexelec

Model Number:FTSO 25/40/50

Place of Origin:France

.... Flexelec hot wire is made in France, It was formed by Nickel-Copper fever and Cilica Gel outer layer; Size: 5X7mm (cross section); About three hundred metre per roll; Standard-Voltage 230V (FLEXELEC can also produce 24V or 115V for your special

Brand Name:Infinity Machine

Model Number:RS-DP-12A

Place of Origin:Made in China

... test surface made of 3mm thick steel place cushioned with 15mm thick wood board. It is required to adopt aluminum alloy sections for

Brand Name:ORK

Model Number:Customized

Place of Origin:Guangdong,China

...Section From 1mm to 50mm O-ring cord is extruded rubber in an "O" shaped section. It is generally available in Nitrile (NBR) FKM (FPM) Silicone (VMQ) and EPDM. Materials. Cord such as EPDM O-ring Cord is generally supplied on coils of varying length, typically 25, 50 or 100 metres dependent upon the cross section or material. Dimensions: Cross section...

Brand Name:ORK

Model Number:Customized

Place of Origin:Guangdong,China

.... Different meters will use different rubber seals, different shapes and different materials.the mainly shape are rectangle and round, but the cross section always

Brand Name:ORK

Model Number:Customized

Place of Origin:Guangdong,China

High Temp Rubber NBR O Rings Economical 0.031 - 0.250 Inch Cross Section​ Advantage: excellent resistant to gasoline and Fat hydrocarbon oil, second only to TR, ACM and FKM, better than other general rubber. Good ...

Brand Name:ORK

Model Number:Customized

Place of Origin:Guangdong,China

Good Oil And Fuel Resistance NBR Quad Ring For Static And Dynamic Applications NBR Quad Ring Material Description NBR(nitrile butadiene rubber) *Service Temperature For NBR the service temperature can be designed from -50 C to 100 C or up to 120 C ...

Brand Name:ORK

Model Number:standard & non-standard

Place of Origin:ShangRao ,China

...Section:1.78mm/2.62mm/3.53mm/5.33mm/6.99mm • JIS B 2401 Standard Sizes: • P type Cross Section:1.9mm/2.4mm/3.5mm/5.7mm/8.4mm • G type Cross Section:3.1mm/5.7mm • V type Cross Section:4mm/6mm/10mm • S type Cross Section:1.5mm/2mm Silicone Rubber O-...

Brand Name:ORK

Model Number:standard & non-standard

Place of Origin:ShangRao ,China

...Standard Sizes: • Cross Section:1.78mm/2.62mm/3.53mm/5.33mm/6.99mm • JIS B 2401 Standard Sizes: • P type Cross Section:1.9mm/2.4mm/3.5mm/5.7mm/8.4mm • G type Cross Section:3.1mm/5.7mm • V type Cross Section:4mm/6mm/10mm • S type Cross Section:1

Brand Name:ORK

Model Number:Customized

Place of Origin:Guangdong,China

...JIS B2401 Standard size,with cross section, 1.90mm, 2.40mm, 3.10mm, 3.50mm, 5.70mm, 8.40mm GB3452.1 Standard size, with cross section, 1.80mm, 2.65mm, 3.55mm, 5.30mm, 7.00mm Metric Size, with cross section, 1.00mm, 1.50mm, 2.00mm, 2.50mm, 3.00mm, 3.50mm, 4

Brand Name:ORK

Model Number:Customized

Place of Origin:Guangdong,China

... section. It is generally available in Nitrile (NBR) FKM (FPM) Silicone (VMQ) and EPDM. Materials. Cord such as EPDM O-ring Cord is generally supplied on coils of varying length, typically 25, 50 or 100 metres dependent upon the cross section or material...

Brand Name:ORK

Model Number:Customized

Place of Origin:Guangdong,China

ORK Standard / Nonstandard FKM O Rings Cord , Fluorocarbon Oring Set PRODUCTS DISCRIPTION: O-ring is a kind of rubber ring with round cross section, because of its O-type section,it is called O-ring. It is widely used in hydraulic and pneumatic ...

Brand Name:ORK

Model Number:Customized

Place of Origin:Guangdong,China

... common rubber strip products are produced in either Neoprene strip or EPDM strip rubber. Our rubber strip products are supplied in square section to meet any given width, length, and thickness you may need. Manufactured Rubber strip is available in white

Brand Name:ORK

Model Number:Customized

Place of Origin:Guangdong,China

... range of static or dynamic applications. 2. O-Ring sizes are defined by the inner diameter-ID and the cross section-CS, our o-ring Inner Diameter can be from 0.5mm to 1500mm. 3. Standard sizes such as AS568(PARKER sizes), JIS(P TYPE, G TYPE, S TYPE, V ...

Brand Name:ORK

Model Number:Customized

Place of Origin:Guangdong,China

... from 0.031 in (0.794 mm) to 26.0 in (66.04cm) Outside Diameter from 0.094 in (2.38 mm) to 26.5 in (67.31cm) Cross Section from 0.031 in (0.794 mm) to 0.250 in (6.35mm) In addition to standard

Brand Name:ORK

Model Number:Customized

Place of Origin:Guangdong,China

... from 0.031 in (0.794 mm) to 26.0 in (66.04cm) Outside Diameter from 0.094 in (2.38 mm) to 26.5 in (67.31cm) Cross Section from 0.031 in (0.794 mm) to 0.250 in (6.35mm) In addition to standard imperial

Brand Name:ORK

Model Number:Customized

Place of Origin:Guangdong,China

... from 0.031 in (0.794 mm) to 26.0 in (66.04cm) Outside Diameter from 0.094 in (2.38 mm) to 26.5 in (67.31cm) Cross Section from 0.031 in (0.794 mm) to 0.250 in (6.35mm) In addition to standard imperial and

Brand Name:ORK

Model Number:Customized

Place of Origin:Guangdong,China

... range of static or dynamic applications. 2. O-Ring sizes are defined by the inner diameter-ID and the cross section-CS, our o-ring Inner Diameter can be from 0.5mm to 1500mm. 3. Standard sizes such as AS568(PARKER sizes), JIS(P TYPE, G TYPE, S TYPE, V ...