calibration certificate steel test probe

Brand Name:kingpo

Model Number:CSA C22.2 No. 178-20, Figure 3

Place of Origin:china

CSA C22.2 No. 178-20, Figure 3 steel test probe

Brand Name:Sinuo

Model Number:SN2210-3

Place of Origin:China

... and other standards. The stick probe is used to verify the protection of personnel from contact with hazardous parts. It is also used to verify protection against tool access. Technical parameters: Parameters /Model ...

Brand Name:TMTECK

Model Number:IIW Type 1

Place of Origin:China

About the item Used for calibration of shear and longitudinal transducers, and verification of shear wedge exit point and refracted angle. Can also be used for resolution and sensitivity checking. In accordance with: IIW (International Institute of Welding...

Brand Name:PEGO

Model Number:PG-TP18

Place of Origin:China

...Figure 12 of the IEC 61032 (Test probe 18) and is used to simulate a children human finger. It is also used by the standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the ...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-12.5

...Test Probe with 12.5mm sphere with a 50N force with calibration Product Description IEC60529 IP2X Test Probe with 12.5mm sphere with a 50N force with calibration BND-2A The Test Porbe meets the standard requirements of IEC60529. The Test Probe is a wide range of probes...

Model Number:TP11

...test probe,rigid test probe,safety test probe,probe test Model TP11: 75N force test probe,rigid test probe,steel test probe rigid test probe is used to assess protection of persons against access to dangerous parts and to assess the mechanicalresistance of openings in the enclosure or inner separations. rigid test probe is made of high-grade steel in accordance with the standards and conforms the measures of the flexible finger probe

Brand Name:HUATEC

Model Number:V2 (A4) Block

Place of Origin:China

... material in the Ultrasonic testing, used to calibrate the sensitivity of the ultrasonic flaw detector and ultrasonic probe. Our testing block is certificated by the authority of the state depeartment. Our products include: domestic standards UT blocks,

Brand Name:Charter Leader

Model Number:CLP-RF11GSMPM

Place of Origin:China

...test connector adapter RF coaxial test probe The Current Monitoring probes may be used whenever RF current measurements are required. Current measurements are made by placing a current carrying conductor within the “sensing” window of the probe and measuring the probe’s output voltage with an RF detector. Calibration of the probe...

Brand Name:HongCe

Model Number:HT-I23

Place of Origin:China

...Test Probe IP Protection Level Testing Equipment IEC 60529 Certification Industrial Grade Safety Testing Solutions Product Introduction: HT-I23 telecommunications test probe is designed for safety protection in harsh environments. As a source manufacturer, we create each probe with ingenuity to protect the safety and reliability of your equipment. Whether it is dust and water resistance testing...

Brand Name:WINNER

Place of Origin:CHINA

... probes also have many different manufacturers, but all have similar constraints. When choosing a test probe receptacle, the most important decision is what tip to use. The number of tips that are available can be overwhelming. From past experiences, we

Brand Name:PEAKMETER

Model Number:T3001

Place of Origin:China

...Certification Features Probe Pen length 148mm/Probe Pen nib Ø2mm Probe Pen plug: Ø4mm cross plug, Right angle Probe Pen line: 20AWG, length 1000mm, Red/Black Safety Rating: EN61010-031, 1000V CAT. Ⅲ/600V CAT. Ⅳ, MAX 10A Product Description DESCRIPTION 10A ULTRA SOFT PROBE TEST Lead Length Probe Probe...

Place of Origin:China

Brand Name:Julixing

.... Used to check the security of parts that snap together. The spring gauge assembled in the handle can be calibrated to the neccessary force for using the instrument. This probe is make of stainless steel with appropriated hardened tip and a handle in

Brand Name:SHC

Model Number:SC-Fig6

Place of Origin:China

... SФ12.5+0.20 mm SФ12.5+0.20 mm Force ---- 50N Standard IEC61032 IEC60529 Product information: This test sphere probe confirms to IEC61032 figure 6 probe 2, IEC60529 of IP2. It is intended to verify the degree of protection of enclosures against ingress of

Brand Name:LIB

Model Number:R-1200

Place of Origin:China

...Water Spray Test Chamber with Calibration Certificate • Product information of IPX1 X2 X3 X4 Comprehensive Water Spray Test Chamber with Calibration Certificate IPx1 IPx2 IPx3 IPx4 Drip and Spray Water Test Chamber can perform tests in accordance with ...

Brand Name:KingPo

Place of Origin:China

20V 10A EV Battery Testing Equipment With Calibration Certificate 20V10A Battery Charge and Discharge system BTS-20V10A Battery Testing System , Battery Testing Equipment With Calibration Certificate Technical Parameter: BTS-20V10A Battery tester Model ...

Brand Name:HJ

Model Number:HT-U11

Place of Origin:China

..., precision is everything. The He Jin Stainless Steel Test Finger Probe (Figure 58.5) embodies reliability and durability for evaluating the protection of electrical enclosures and components against accidental human contact. This test probe simulates a

Brand Name:MEASTEK

Model Number:MDP5150A

Place of Origin:SHENZHEN

...test probe 70MHz bandwidth Anti-interference Automatic data saving Key Features: 【Ultra-High Voltage Measurement】 ±1500Vpk differential voltage + 70MHz bandwidth Ideal for IGBT, MOSFET, and high-voltage power supply testing 【Universal Compatibility】 Standard BNC connector works with ALL oscilloscopes (1MΩ/50Ω switchable) 50X/500X attenuation ratio auto-detected 【Smart Calibration...

Place of Origin:Beijing, China

Brand Name:JHH

Model Number:WAW-600B

...Testing Machine with Traceable Calibration Certificate Product Description: Servo Hydraulic Testing Machine is a professional universal testing system with high-speed data acquisition system. It is designed for testing the performance of materials under the condition of tensile, pression and bending. It is widely used in research institutes, universities, military industry and other industries. Servo Hydraulic Testing

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

...Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts.The Rigid Test Finger was made on stainless steel and Polyamide handle. Applicatiopn 1.The joint part of The Standard Test

Brand Name:YIERYI

Model Number:PH-61181

Place of Origin:China

...Calibration One button operation ensures rapid and precise pH calibration reducing human error and improving efficiency Replaceable Probe Design Easy to maintain replaceable probe for long term use and cost savings ideal for continuous applications Multiple Application Scenarios Suitable for loose or tapered soil hydroponics cheese meat laboratory testing...