children finger test probe

Place of Origin:China

Brand Name:Julixing

...-1997 and UL 2. Children Test Finger 19 Probe is the necessary appliance to prevent electic shock for household and similar electrical problem Technical Parameters: 1. Knurled Finger Diameter: 5.6mm 2. Knurled Finger Length: 44mm 3. Head Radius: 2.8mm 4.

Brand Name:PEGO

Model Number:PG-TP11

Place of Origin:China

IEC61032 Rigid Finger Test Probe 11 customized with 50N or 75N Force Introduction: The rigid finger probe is designed according to IEC61032 figure 7 and UL clauses. This probe may be used to verify the protection of persons against access to hazardous par...

Brand Name:Sinuo

Model Number:SN2210-7T

Place of Origin:China

IEC 60335-2 Rigid Finger Test Probe 11 With Force 50N Product Information For Rigid Finger Test Probe 11: This rigid finger probe conforms to the standard requirement of IEC IEC60335-2-6 clause 22, IEC60335-2-9 clause 22, IEC61032 figure 7 device 11, ...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:CHINA

...Finger Test Finger Rigid Test Finger Test Probe Uses Protection test straight finger 50N thrust test finger Used to test the body to prevent touching parts, can also be used to check the hole of the outer casing or the inner baffle of the outer casing Mechanical strength. Compliance with standards In accordance with IEC61032 Figure 7 test...

Brand Name:SHC

Model Number:SC-F913

Place of Origin:China

...15 0 -0.1 4 Ф25±0.2 5 4 6 Ф10 7 20 Standard Test Probe Kit: IEC61032 Figure 2 Test Probe B standard test finger IEC61032 Figure 16 Test probe 41​ Test Thorn Probe IEC61032 Figure9 Test probe13, short pin Information: This pin is intended to verify the

Place of Origin:China

Brand Name:BONAD

Model Number:BND-19

...Children Test Finger 19 IEC61032 Children Test Finger 19 Article NO.:BND-19 Specification: Children Test Finger / Children Test Finger19 1, According to : IEC61032-1997 Fig12 and Fig.13 / EN71 ASTM F963 and UL 2, Children Test Finger 19 Probe is the necessary appliance to prevent electric shock for household and similar electrical problem Technical Parameters: 1, Knurled Finger Diameter: 5.6mm 2, Knurled Finger...

Brand Name:HJ

Model Number:HT-I12

Place of Origin:China

Children Finger Probe 18 HT-I12 Children Finger Probe 18 HT-I12 Hemispherical R4.3±0.05 Finger Probe Diameter Ф8.6±0.1 Standard of Children Finger Probe 18: IEC61032 figure 12 finger probe 18, IEC335.1,UL1017. Application of Children Finger Probe 18: It is used to simulate the children who are older than 36 months and younger than 14 years to test whether the hazardous parts can be touched. Feature of Children Finger Probe...

Brand Name:kerang

Model Number:HT-I12

Place of Origin:CHINA

Children Finger Probe HT-I12 Standard:IEC61032 figure 12 finger probe 18, IEC335.1,UL1017. Application:It is used to simulate the children who are older than 36 months and younger than 14 years to test whether the hazardous parts can be touched. Test sample:Easily accessible enclosure live parts or mechanical parts. Feature:Can be combined with the push-pull gauge to achieve force of 10N load test. Parameters: Name/Model Children Finger Probe...

Brand Name:HongCe

Model Number:HT-I13

Place of Origin:China

... the children who are younger than 36 months to test whether the hazardous parts can be touched. Test sample: Easily accessible enclosure live parts or mechanical parts. Feature: Can be combined with the push-pull gauge to achieve force of 10N load test.

Place of Origin:HONG KONG

Brand Name:ALLIED TESTING

Model Number:TP18

... size test fingers are to test for protection against access to hazardous parts with a human finger and / or arm. These are high precision probes made in exact accordance with IEC 61032, Figures 12 and 13. The child's finger is also called out in U.S.

Brand Name:kingpo

Model Number:IEC61032 figure 7

Place of Origin:china

... 4, Dam- board Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1. Aluminium box and carton box, careful and tight package, make sure the ...

Brand Name:KingPo

Place of Origin:China

...Test Probe B Finger Length 100mm IEC60335 2 14 Clause 20.2 IEC60335-2-14 Clause 20.2. Test Finger B Product Details Standard description: For blenders, detachable parts, except lids, are not removed. The test is carried out with a test probe similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test finger...

Brand Name:WINNER

Place of Origin:CHINA

...test probes are necessary parts for PCB testing to access components on printed circuit assemblies There are total 100 pieces spring test probes in one set that you can use for a long time Cone shape head can be used for testing through-hole components Widely used for testing PCB gold fingers(edge connectors) and pads They are great replacement probes if you need to change broken or old test probes...

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

...Test Probe EVSE Testing Equipment Equipment Overview This is a precision test finger made in accordance the requirements of IEC 61032 test probe, required by many standard such as IEC 61851-1 clause 8 and 12.4, IEC 60529 IP2, etc. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger

Brand Name:HTI

Model Number:TW-204A/B

Place of Origin:Guangdong,China(Mainland)

...Probes Toys Testing Instrument Fake Finger Touch Probe Testing Equipment Description: To determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Applications: Accessibility probes are designed for two age groups: Probe...

Brand Name:Lonroy

Place of Origin:China

...Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Technical specification Test...

Brand Name:Kinte

Model Number:WH-8601

Place of Origin:Guangdong,China (Mainland)

GB4706.1 Standard Test Finger Pin Electrical Test Probes WH-8601 Standard test finger, pin (test probe), pin: meet the standards: GB4706.1, GB8898-97, GB2099.1-96, IEC884-1 the corresponding provisions of the requirements.

Brand Name:PEAKMETER

Model Number:T3002

Place of Origin:China

...Test Probes And Pen-Typing Lead Probe Wire Features Probe Length: 120mm/Probe Tip Ø2mm Probe Plug: Ø4mm Cross Plug, Right angle type Probe Wire: 22AWG, red/black Length: 800mm Safety Class: EN61010-031, 1000V CAT Ⅱ, MAX 10A DESCRIPTION 10A ULTRA SOFT PROBE TEST Lead Length Probe...

Brand Name:Better Health

Model Number:DM100

Place of Origin:CHINA

...h varying specifications to meet the needs of different surgical procedures. Our probes are made from high-quality materials and are designed to be durable and long-lasting. We also offer customized OEM and ODM designs to meet the specific requirements of

Brand Name:Charter Leader

Model Number:CLP-RF11GSMPM

Place of Origin:China

...test connector adapter RF coaxial test probe The Current Monitoring probes may be used whenever RF current measurements are required. Current measurements are made by placing a current carrying conductor within the “sensing” window of the probe and measuring the probe’s output voltage with an RF detector. Calibration of the probe...