clause 33 2 electric vehicle connector test equipment

Brand Name:Sinuo

Model Number:SNQC1012

Place of Origin:China

...-1:2020 clause 13.3.1 fig12, table 3, etc. It is used to process mechanical tests on terminals, for judging whether the design and the structure of the new terminals are fitted with new conductors and of the minimum and the maximum cross-sectional areas is

Brand Name:Sinuo

Model Number:SN2122C

Place of Origin:China

IEC 61851 Electric Vehicle Supply Equipment EVSE Mechanical Strength Impact Test Equipment Complied Standards & Clauses This mechanical strength inpact test equipment complied to IEC 61851-1 2017 clause 12.11 standards. Technical Parameters Control and ...

Brand Name:PEGO GROUP

Model Number:PG-TPB

Place of Origin:China

...be used to test the EV socket-outlets and vehicle connectors, it's strictly designed according to IEC61032 figure 2, and meets the requirements of IEC62196-1 clause 10.1, UL507, UL1278 figure 8 and IEC60529 figure 2. The test finger probe is intended to

Brand Name:KeRang

Model Number:KR-DT-01

Place of Origin:China

Electric Iron Drop Test Equipment Standard: Clause 21.101 of IEC 60335-2-3 Household and similar electrical appliances – Safety: Part 2-3: Particular requirements for electric ions, Clause 21.101 of IEC 60335-2-17 Household and similar electrical ...

Brand Name:HJ

Model Number:HJAP07

Place of Origin:China

...Test Equipment Splash Water And Submersion Test Chamber Standard: ISO16750-4 Road vehicles-Environmental conditions and testing for electrical and electronic equipment-Part 4: Climatic loads, clause 5.4.2 Ice water shock test. VW-80000 Electric And Electronic Components In Motor Vehicles up to 3.5t General Requirements, Test Conditions and Tests clause...

Brand Name:KINGPO

Place of Origin:China

... Test System Splash 3s Under 0-4°C To Simulated Environments A. SYSTEM introduction : It conforms to ISO16750.4clause 5.4 :Ice water shock test ,It is Used For Safety Testing For Simulated Environments Of Electrical And Electronic Systems that may be

Brand Name:HongCe

Model Number:HH0807A

Place of Origin:China

ISO16750.4 Clause 5.4 Road Vehicles Water Splash Test System Splash 3s Under 0-4°C To Simulated Environments A. SYSTEM introduction : It conforms to ISO16750.4clause 5.4 :Ice water shock test ,It is Used For Safety Testing For Simulated Environments Of ...

Brand Name:kingpo

Model Number:KP-8825

Place of Origin:china

...;Plug,socket-outlets,vehicle couplers and vehicle inlets–Conductive charging of electric vehicle-Part1:Charging of electric vehicles up to 250A a.c and 400A d.c" clause 7.11 and clause 7.15 IEC 60309-1:2012 "Plug,socket-outlets and couplers for

Brand Name:Mckee Charging Cube

Model Number:CLF-Module

Place of Origin:Luoyang, China

Mckee EV Portable Electric Vehicle Charger 3 Phase Type 2 Car Charging Connector Description MCKEE series charging module is the internal DC power module of out-door integrated DC charging piles, which converts AC to DC and then charge electric vehicles, ...

Brand Name:Terui

Model Number:SHV-J5Y

Place of Origin:China

SHV male connector for RG58 Cable Series SHV is coaxial high voltage connector with 3.5KV (RMS) or 5KV DC. The connector is widely used in nuclear devices and test equipment . Voltage is suitable for matching mated or unmatched conditions. Product Details ...

Brand Name:JWY

Model Number:WR-XXXXXXXX

Place of Origin:China

#6/#8/#10 Stud Terminal & 187 Receptacle​ Red Custom Wiring Harness 18AWG Wire Specification: Products Name Wiring Harness Application Equipment/Machine Internal Connector 1 Spade Terminal Connector 2 Female 187 Receptacle Cable UL 1007 18AWG Cable ...

Brand Name:PEAKMETER

Model Number:PM701

Place of Origin:China

...testing AC charging station Features of Top Current Simulation Evse Tester with IP54,GFCI and CP pre testing AC charging station The adapter is capable of conducting electrical safety and functiontests on mode 3 electric vehicle charging equipment (EVSE) with a type2 connector . PE Pre-Test...

Place of Origin:China

Brand Name:Lonroy

...Test Bench Automotive Wire Harness Load Integrated Testing Station Product Description Scope of Application Complies with ISO 8092.1 - 4 series standards and QC/T 417.1 - 417.5 - 2001 standards for vehicle electrical wiring harness connectors, etc. Testing Function 1. 8-wire voltage drop detection, equipped...

Brand Name:BOGES

Model Number:Boges-SMAM-141-OPN-L

Place of Origin:Dongguan, Guangdong, China

...: SMA Connector Male Application: 1. Wireless industries 2. Communication equipment 3. Base stations 4. Telecom 5. Test and measurement Specification A. Electrical Characteristics Frequency DC~3GHz Impedance 50 ohm S.W.R 1.5MAX @ 0~3GHz Return Loss >

Brand Name:cartrack

Model Number:CA100F

Place of Origin:China

...Electrical Speed Limiter Speed Limiting 30KM/H ES6413/2019 1. Safety Requirement All the four samples shall be tested for performance as prescribed in clauses below. All cable or harness connectors in the speedometer circuit shall be wired and sealed. All connections shall be soldered and insulated with a flame proof insulation tape of adequate length of such a color as to blend well with the rest of the vehicle...