concrete components micro steel fiber

Brand Name:Yusen

Model Number:YS-0.22*13

Place of Origin:China

... system. They are available in different diameter & length sizes,mostly are 0.2mm ,0.3mm in diameter and length in 6mm and 13mm. Micro steel fibers are made of copper-coated steel wire which is the most important materials of UHPC. Because UHPC has the

Brand Name:Briture

Model Number:Copper Coated Micro Steel Fiber

Place of Origin:Hefei,Anhui,China

...,which is also named brass coated micro steel fiber or micro steel rebars widely used for concrete reinforcement and concrete slabs. Propety: In mechanical and performance terms, by adding steel fibers to the concrete mix you can: 1.Increase and get a

Place of Origin:Chongqing, China

Brand Name:Roadbuilding

...Concrete Buy Helix Steel Fiber Product Description Technical requirements for ground construction of steel fiber reinforced concrete industrial buildings General engineering mix Steel fiber content (%) sand ratio (%) water cement ratio Collapsbillity (cm) dosage per unit (Kg/cubic) steel fibre concrete gravel sand water 1-1.2 40 0.45 3-5 78 450 1233 819 180 Crucial engineering mix Steel fiber...

Brand Name:SUNTECHMACH

Model Number:ST-100

Place of Origin:CHINA

...Steel Fiber Making Machine For Concrete Glued/loosen Steel Fiber Production Line 1.0 Composition of production line: 1.1 Wet wire drawing line: D800 Spool pay off (according to the 2.2mm wire supplier → water tant wet wire drawing machine → D400 Spool wire take machine 1.2 Steel Fiber...

Brand Name:XINCHOR

Model Number:XQ-XW21C

Place of Origin:China

...Surface Leveling Carbon Fiber Resin For CFRP Strengthening XQ-XB301 is a 100% solids, two-component, cohesion response structural reinforcement materials.Using copolymer as the basic raw material, this product is made of 100% solid modified epoxy ...

Brand Name:Huitong

Model Number:Stainless Steel Fiber Conductive Additives

Place of Origin:China

Micro Scale Stainless Steel Fiber Conductive Additives 1.Product introduction: Micro Scale Stainless Steel Fiber Conductive Additives (SFCA) is composed of micrometer fine stainless steel fiber and exclusive surface coupling agent. SFCA is used as the ...

Brand Name:FOCABLE

Model Number:1*2 PLC Splitter Micro Steel Tube Type

Place of Origin:China

Fiber Optic Plc Splitter SC / APC 1*2 Micro Steel Tube Type OEM Package Available High-port count applications for broadband system applications demand the best performance and the highest reliability under the most adverse of conditions. Focable's Planar Lightwave Circuit Splitters deliver on all these requirements. These highly stable components...

Brand Name:Seacent

Model Number:2x4 micro type

Place of Origin:Guangdong , China

Fiber Optic PLC Splitter 2x4 micro type with SC/APC connector A PLC (planar lightwave circuit) is a micro-optical component based on planar lightwave circuit technology and provides a low cost light distribution solution with small form factor and high reliability. Seacent Photonics offers excellent performance PLC splitter .Here are the details of 2x4 micro type fiber...

Brand Name:Firepower

Model Number:FCG24A

Place of Origin:CHINA

... fiber ring skeleton, shell and other structural parts; 3 Appearance and dimension The product is cylindrical, with overall dimensions of φ24 mm × 40mm Product Overview MFOG-24 micro-nano fiber optic gyroscope (hereinafter referred to as this product) is

Brand Name:YINGDA

Model Number:FCP-FB

Place of Origin:china

Fiber Tool Kits Tungsten Steel Micro Optical Fiber Cutting Pen Knife Wide Blade Features 1. Blade material: tungsten steel (sharp blade) 2. The blade is sharp, easy cutting, abrasion resistance 3. Portable, non slip, good grip 4. Protective cap, ensure that the cutter head is not accidental damage, has the very strong anti fall even in the absence of a pen cap. Reminder: 1. Is the fiber cutting pen can replace the desktop precision optical fiber

Brand Name:CITTIMESH

Model Number:Flat End Steel Fiber

Place of Origin:China

...steel fiber reduce crack widths and control the crack widths to improve durability. Flat end steel fiber is made of cold-drawn steel wire. fibers with high tensile strength up to 1150 MPa. It is also called fiber-reinforced concrete which 500 times resistance to cracking and 40 percent lighter than traditional concrete. Special design of flat end provides optimum anchorage within the concrete...

Brand Name:XXR

Model Number:OFSS-25T

Place of Origin:CHINA

...composed of transparent heat shrinkable tube, hot-melt tube and stainless steel needle. The transparent outer layer is convenient to detect whether the connection of the optical fiber joint is correct, so that the optical fiber can be assembled simply and

Categories:MTP MPO Cables

Country/Region:china

In-line closure, CSC-GJS(04)/5 series provide suitable for cable whose diameter is 10-23mm, they can be used in aerial, duct, and direct buried application; These products are made of the high quality material and with the mechanical sealing structure ...

Model Number:1*2 fiber optic plc splitter

Place of Origin:China

Brand Name:ODM/OEM

1*2 fiber optic plc splitter with micro steel tube SC APC /SC UPC PLC splitter #detail_decorate_root .magic-0{border-bottom-style:solid;border-bottom-color:#53647a;...

Brand Name:GEZHI or OEM

Model Number:1x8 PLC Splitter Bare Fiber

Place of Origin:China

Ordering Information GP XXX XX XX XX XX XX Port Configrition Module type Cable type Fiber length Input connector Output connector G=Gezhi P=PLC 102=1x2 104=1x4 108=1x8 116=1x16 132=1x32 164=1x64 204=2x4 208=2x8 216=2x16 232=2x32 264=2x64 BF=Bare Fiber BL=...

Brand Name:Makeit

Model Number:7D*51MM

Place of Origin:Jiangsu, China

7d*51mm Virgin Material 100% Polyester Materials Ball PSF For Filling 1. Introduce Pearl ball fiber is the use of high pressure process from the special processing, small molecules, resilience can be very high. Pearl ball fiber after compression, texture ...

Brand Name:Rongsheng

Model Number:High-Strength Steel Fiber Reinforced Concrete Refractory Castable Wear Fire-Resistant

Place of Origin:Henan CN

Steel Fiber Reinforced Concrete Refractory insulating castable Wear Fire Resistant Technical Index: Item Steel Fiber Reinforced High Alumina Refractory Castable Al2O3,% ≥ 70 Water Addition, % 7.0-8.0 Bulk Density, 110°C×24h, (g/cm3) ≥ 2.5 Permanent ...

Brand Name:OTOP / OEM Accepted

Model Number:SC / APC 1x8 Micro Steel Tube

Place of Origin:China

FTTH Micro Steel Tube Type PLC Splitter 1x8 Lower Insertion Loss OEM Accepted ♦ Quick Details - Product Model: 1x8 PLC splitter - Connector: SC, LC, FC, ST - Ferrule: APC, UPC - Splitting ratio: 1*8 - Fiber diameter: 0.9mm - Certification: Telcordia GR-...

Brand Name:Billion Steel

Model Number:OEM customization

Place of Origin:Guangdong, China (Guangzhou, Guangdong)

...steel sheet galvanized concrete Structural steel embedded parts Use embedded parts in construction. What are embedded parts and where are they used? Recently, the term "embedded part" has become more common. Typically, such a part is a sheet of metal to which reinforcements (anchors) are welded. Choice of boards and accessories can be very diverse Why do you need this? Where are they placed? Embedded components

Brand Name:SAMYON

Place of Origin:CN

Model Number:STRAIN

FBG Strain Gauge Sensor Stainless Steel Material Small Size Long Time Monitor SAM-FBG Strain Gauge Embedded type Description: The Embedded FBG strain gauge is used to measure the change of strain inside concrete, it’s adopts a encapsulation structure to ...