cuni34 strip nickel copper alloy 400

Brand Name:DLX

Model Number:CuNi34

Place of Origin:China Jiangsu

... to manufacture rheostat, shunt, controller and other low voltage electrical components with a maximum operating temperature of 300°C. Due to its good heat coefficient, this alloy is widely used in low temperature heating cable of

Brand Name:Best

Model Number:1/2''-48''

Place of Origin:China

...Nickel Alloys 400 Characteristics − Nickel-copper alloy 400 is a solid-solution alloy that can be hardened only by cold working. It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. Typical Applications − Alloy 400...

Place of Origin:Jiangsu, China

Brand Name:tgpx

...steel wire rod alloy 400 nickel bar Monel K500 has approximately twice the tensile strength and triple the yield strength of Alloy 400. The strength of Monel K500 is maintained to 1200 degrees Fahrenheit, but stays ductile and tough down to temperatures of

Place of Origin:Suzhou, China

Brand Name:XUNSHI

Model Number:Monel 400

...ALLOY 400UNS N04400 Alloy 400 Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy...

Brand Name:Sewaly Metal

Model Number:Monel K500 K400

Place of Origin:China

... in hydrofluoric acid and fluorine gas media, and is one of the few materials that can come into contact with nitrogen, hydrofluoric acid and hydrogen fluoride or their compounds. Monel 400 alloy does not perform well

Brand Name:Tisco Technology

Model Number:monel 400

Place of Origin:Jiangsu, China

...-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and

Brand Name:Huona

Model Number:CuNi23

Place of Origin:Shanghai

...Strip Product Overview CuNi23 strip, a high-performance copper-nickel alloy strip meticulously crafted by Huona New Material, is engineered with a nominal 23% nickel content balanced with copper as the base metal. Leveraging our advanced rolling and annealing technologies, this strip...

Place of Origin:china

Brand Name:AW

Model Number:FORGED monel 400 alloy BAR ROD

...400 r405 alloy rod bar Rods 5/16 to 3/4 in. (7.94 to 19.05 mm) excl in diameter, hot- or cold-finished, solution annealed and pickled or mechanically descaled. Rods 3/4 to 31/2 in. (19.05 to 88.9 mm) incl in diameter, hot- or cold-finished, solution annealed, ground or turned. Nickel-Copper Alloy Rod, Bar, and Wire nickel-copper alloys...

Brand Name:TANKII

Model Number:Monel 400

Place of Origin:Shanghai China

...400 Nickel Copper Alloy Strip Used for Corrosion Resistance Monel 400(UNS N04400/2.4360) is a nickel-copper alloy with high strength and excellent resistance to a range of media including seawater, dilute hydrofluoric and sulfuric acids, and alkalies. Monel 400 containing about 30–33% copper in a nickel matrix has many similar characteristics of commercially pure nickel...

Brand Name:Daway

Model Number:Monel 400, UNS N04400, W.Nr. 2.4360/2.4361

Place of Origin:MADE IN CHINA

...400 Nickel Copper Alloy Steel Strip, Plate, Strip UNS N04400 ASTM B127 Monel 400 is a Nickel-Copper alloy with high strength and toughness and remains ductile even at subzero temperatures. Age-hardening treatments are not required to obtain the high strength properties of Monel 400 because it is a solid-solution alloy that is hardened only through cold working. The alloy...

Brand Name:YUHONG

Model Number:ASTM B165 UNS N04400, Monel400, 2.4360

Place of Origin:China

...400, 2.4360 Nickel Copper Alloy Steel Seamless Pipe Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy...

Brand Name:VANFORGE

Place of Origin:China

... has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. Alloy 400 is widely used in many fields, especially marine and chemical processing. Typical applications are valves and pumps; pump and

Brand Name:TOBO/TPCO/TISCO/VALIN/METAL

Model Number:1.4835 Stainless Steel Seamless Pipe

Place of Origin:China/Japan/Germany

astm-uns n04400 good price nickel copper alloy monel 400 bar Overview Quick Details Place of Origin: China Type: Nickel Strip Powder Or Not: Not Powder Supply Ability Supply Ability 150 Kilogram/Kilograms per Month Packaging & Delivery Port Port of ...

Brand Name:Monel

Model Number:Monel 400 - UNS N04400

Place of Origin:China

...temperature alloy with typical composition of 67% Nickel & 23% Copper. Monel 400 Forgings are precipitation hardening fasteners manufactured from copper nickel alloy with addition of titanium and aluminium. Chemical Composition ASTM B127 – Plate, sheet &

Brand Name:TSINGSHAN

Model Number:Monel 400

Place of Origin:China

... water and steam at high temperatures as well as to salt and caustic solutions. monel 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and

Brand Name:Victory

Model Number:Monel 400

Place of Origin:China

...400 strip is a thin, flat metal sheet made from the Monel 400 alloy. 2. It is available in various thicknesses and widths to suit specific requirements. 3. The strip's composition typically consists of approximately 67% nickel and 30% copper, with small amounts of iron, manganese, and other elements. 4. This composition provides the strip with its characteristic properties. Feature: 1. Corrosion resistance: Monel 400 strip

Brand Name:Eternal Bliss

Model Number:20359

Place of Origin:China

...400 Nickel Copper Alloy Sheet and Plate for Hot Rolled Annealed and De-scaled Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy...

Place of Origin:China

Brand Name:Senphus

Model Number:CX400/Monel 400/N 04400/2.4360

... valued for its exceptional corrosion resistance, high strength, and durability in harsh environments, including exposure to seawater, chemicals, and elevated temperatures. Monel 400 is widely used in

Brand Name:TOBO

Model Number:Copper Nickel Plate

Place of Origin:China

Nickel Monel 400 ASTM B164 B127 B906 Nickel Copper Alloy Sheet and Plate Overview Essential details Place of Origin: Shanghai, China Brand Name: TOBO Model Number: C10100,C10200,C10300,C10400,C10500,C10700,C10800 Application: Industrial or Decorative Shape: Plate Width: 20~2500mm Material: Brass Grade: Copper Cu (Min): 99.9% Alloy Or Not: Non-Alloy Ultimate Strength (≥ MPa): 220--400...

Brand Name:DINGSCO

Model Number:According to customers' requirements

Place of Origin:China

Monel 400 Forged Flange | High Strength Nickel-Copper Alloy Forging This product is a precision-machined forged flange made of Monel 400 (UNS N04400), a nickel-copper alloy known for its exceptional strength and excellent resistance to seawater, acids, and...