dc 4ghz dummy load

Brand Name:Vinncom

Model Number:VN-LD-4G-50W-OPM

Place of Origin:CHINA

...4GHz RF Dummy Load Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load...

Brand Name:ZENITHSUN

Model Number:DRLB

Place of Origin:China

610A,DC Variable Resistive Dummy Battery Load Banks With Control Cabinet Structure 1.An assembly-type enclosure contains DR series or DQ series or AS series or other high power ...

Brand Name:YLT

Model Number:Terminations

Place of Origin:China

Coaxial Fixed Terminations Series 50Ω 1000w Connector 7/16 DC-3 Max VSWR1.3 400×410×147mm Coaxial fixed terminationsabsorb RF＆ microwave energy and are commonly used as dummy loads of antenna and transmitter. Also used as mach ports in many multiport ...

Brand Name:ZD

Model Number:ZD-DL-3GHz-300W-NF

Place of Origin:China

DC-3GHz 300 W N Female Connector Coaxial RF Dummy Load with 50 Ohm RF dummy load introduction: N male RoHS Aluminium black oxide dc 3GHz 5W 50 ohm RF dummy load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves. N male RoHS Aluminium black oxide dc

Model Number:ZCT-50RN-18T

Place of Origin:Chengdu,China

Brand Name:Zysen

...DC-18GHz N connector Coaxial Termination ​ DC-4GHz, 8GHz,12.4GHz,18GHz are available with N, SMA connector . Zysen also offer a series Coaxial Termination frequency up to 67GHz , Power handling from 0.5 to 2000watts,connector SMA,N, 2.92mm or chip, flange are avaliable. Contact us with your requirement. Electrical Specifications Frequency Range DC – 18GHz Power 50W CW@25ºC (when temp. Up to 125ºC, the power reduced to 5W linearly) VSWR DC

Brand Name:LENOLINK

Model Number:LD10-DIN

Place of Origin:CHINA

... termination to properly terminate the output port of a device or to terminate one end of an RF cable. Lenolink Termination loads are characterized by low VSWR, high power capacity and performance stability. Widely used for GMS/DCS/UMTS/WIFI/WIMAX etc.

Categories:RF Termination Load

Country/Region:china

FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications Frequency Range(MHz) DC-6000 VSWR ≤...

Brand Name:DALEE

Model Number:DL50011209

Place of Origin:Guangdong,China(Mainland)

...dummy load with gold flash Product Details: Product name: DALEE RF Connector Secification: 1-4 generation Type : Female Certification: ISO9001,UL,ROHS and the latest REACH Voltage Rating: 60 VAC Operating Temprature: -40℃ - +85 ℃ Nominal Characteristic Impedance: 50 ohm Applicable Frequency: DC~6 GHz Vspr: 1.3 MAX.(DC...

Brand Name:ELT

Model Number:SMP-KR8-0.5W

Place of Origin:Shaanxi, China

... Dummy Load Terminator 40GHz 50Ohm Optional Factory Supply Xi'an Elite Electronc ‘s SMP Male RF Load – Termination is a Push On designed that offers 50Ohm impedance and is rated for a maximum frequency of 40GHz. The low-power matched RF load designed...

Place of Origin:changzhou

Brand Name:XINLIANFENGYUAN

Model Number:AC-190

F Male Terminator, RF Dummy Load 1. Low cost 2. ISO 9001 & TS 16949 certified 3. RoHS & REACH compliance 4. Made in China Features: Excellent insertion/withdrawal ...

Brand Name:WS

Model Number:WS-GAH-Res-20W

Place of Origin:Shenzhen of China

20W 0.1 ohm - 2K ohm Gold Aluminum Housed​ Dummy Load Wirewound Power Resistor We also can make uncommon product per customers requirements. Features: 1, Resistance range: 0.01 ohm - 2K ohm 2, ...

Place of Origin:China

Model Number:BNC/SMA-KK

Brand Name:ZSX

... RF Coaxial Adapter 50Ω DC-4GHz BNC/SMA-KK coaxial adapter is designed with BNC female to SMA female connectors, providing stable and reliable RF signal conversion. It features 50Ω impedance, wide frequency range up to 4GHz, low insertion loss, and low...

Model Number:BNC-KWE

... Brass Model Number BNC-k Product Name BNC Type RF Coaxial Connector Impedance 75 Ohms Frequency Range DC-4GHz Voltage Rating 500v Frequently Asked Questions Q: What delivery

Categories:RF Interconnects

Country/Region:china

901-165 RF Adapters - Between Series BNC PLUG TO SMA JACK VSWR:1.3MAX DC-4GHz Manufacturer: Amphenol Product Category: RF Adapters - Between Series RoHS: Details REACH - SVHC: Details Side 1 RF Series: SMA Side 1 Gender: Jack (...

Brand Name:Sinrui

Model Number:BNC-50J

Place of Origin:China

Products Name: RF BNC 50 Ohm DC 4GHz Male straight coaxial Connector Clamp with cable Products Descrption: BNC connectors have a bayonet-lock interface. It exists in 50 and ...

Brand Name:Retek

Model Number:W28 Series

Place of Origin:China

Stable 3 Phase Brushless DC Motor No Load Current 0.68 - 0.88A W2847 For Hair Dryer This series brushless DC motor(Dia. 30mm) applied rigid working circumstances in automotive control and commercial use application. Typical Application: Electric Shaver, ...

Brand Name:GFUVE

Model Number:GF6019

Place of Origin:Beijing China

... performance. offer two years quality warranty. (Accuracy class: 0.05% or 0.02%) In the Voltage Calibrator mode, the Multifunction Calibrator generates DC/AC voltages up to 1000V and in the Current Calibrator mode it

Brand Name:Terui

Model Number:SMA-50JRN-50JR-18A

Place of Origin:China

RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or ...