din go and no go thread gauge

Brand Name:KM

Place of Origin:Shaanxi, China

...Thread Gauge with Go/No Go Type For Thread Measurement DIN Standard Description: These are inch plug ring gauges are metrology tools that are used for checking threaded or tapped holes, and verify the proper thread type, major diameter, minor diameter, pitch diameter, and pitch of the thread against a mating thread gauge. There are available with different types, including GO thread plug gauges, NOGO thread

Model Number:1907-E321

Place of Origin:P.R.China

Brand Name:M&G Productions P.R.China

32Pcs DIN352 Hand Taps and DIN223 Die Set Contains: M3-M12 DIN 352 hand taps taper plug and bottom. M3-M12 DIN223 round dies 1 PC tap wrench 1 PC die stock 1 screw driver 1 thread gauge

Place of Origin:China

Brand Name:Julixing

... check the minimum outside (major) diameter of the screw thread, dimension d, of caps E14 on finished lamps. Testing: When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the centre contact shall not project beyond

Brand Name:TOBO

Model Number:Nuts

Place of Origin:China

...DIN 934 High Strength Thread Insert Nuts Product Description Product name Hex Nuts Material Stainless Steel Brand TOBO Standard GB,DIN,ISO Surface Plain Inspection Equipment CMM,Projection,Calipers,Micro caliper,Thread Micro caliper,Pin guage,Caliper gauge...

Brand Name:Success

Model Number:1/2

Place of Origin:China

...: 1/2" 1/4'' M20*1.5 Brass Gauge Cocks are an ideal cost effective method of isolating pressure gauges to enable them to be removed from the system for inspection or replacement without having to drain down. Gauge cocks feature an internal sealing ball and

Brand Name:FESTO

Model Number:MA-40-10-1/8-EN

Place of Origin:China

... bar Indicating range 0 psi ... 145 psi Symbol 00991463 Conforms to standard EN 837-1 Nominal size of pressure gauge 40 Design Bourdon tube pressure gauge Type of

Brand Name:Yi Sheng

Model Number:1/2"-72"

Place of Origin:CHINA

High Standard Din Flange Pipes Connected Flanges Used For Pressure Gauge A high pressure pipe flange is a type of pipe flange designed to withstand high pressure applications. Flanges are used to connect pipes, valves, pumps, and other equipment in a ...

Brand Name:DONJOY

Model Number:NO.VQYS30S1-02

Place of Origin:CHINA

... Size: 1/2"G Finish: Ra ≤0.8um,Mirror, 320Grit, 180Grit, 240Grit Connection: Thread Standard: DIN,3A,SMS,ISO Certificate: CE, ISO9001/2015, 3A Application scope: Dairy, food, beer, beverage, pharmacy, ...

Brand Name:SIEMENS

Model Number:7MF0300-1TD1-5MF2

Place of Origin:China

SPECIFICATIONS SITRANS P320 Pressure transmitter Gauge pressure HART (4...20 mA) Measuring cell filling: Silicone oil Maximum measuring span: 63 bar (914 psi) Male thread G1/2A (DIN EN 837-1) Diaphragm: Stainless steel 316L/1.4404, measuring cell: ...

Brand Name:Willing

Model Number:400 mm

Place of Origin:China

...Gauge Cube Box Square 400 mm Salient Features : Made from close-grained Granite having uniform color and texture having hardness between 5.6 to 7 on Moh's scale, sound and free from flaws fissures and large inclusions of softer minerals. Made generally as per GB117-2015. Also available on request conforming to DIN-876-1972, BS-817-1988, JIS -B-7513 and US Federal specification GGG-P-463-C. metallic threaded...

Brand Name:Summery

Model Number:DIN912

Place of Origin:Shanghai

...,6 up to and including M64 and product grade A. Gauging of hexagon sockets is specified in annex A. For approximate masses of screws see annex B. If, in special cases, specifications other than those listed in this International Standard are required, they

Brand Name:kanaif

Model Number:maleable iron pipe fitting Hex Plug High pressure

Place of Origin:China

...definitely have taken calibers of thread, parallelism, Angle, tooth type under control,and each union will be examined by plug gauge. Avg. thickness of zinc coating is higher than 86 um specified in ASME, EN(70um), DIN(70um), SI(78um). Smooth surface without...

Brand Name:Drolee

Model Number:DRLSDSHW4.8-3

Place of Origin:China

316 Stainless Steel Hex Washer Head Self-drilling TEK Screw, DIN7504K, 4.8 x 75mm Hex washer head self-drilling screws are made of stainless steel and have a sheet metal thread with a self-drilling cutting point to pierce through metal steel, aluminium, ...

Brand Name:AFK

Model Number:R11

Place of Origin:China

Single stage pressure regulator suitable for laboratory, instrumentation and analysis, semiconductor. Product View: Single-stage reduce structure Use hard-seal between body and Diaphragm . Bady Thread: 1/4" NPT (F) . Easy to sweep inside body . Filler mesh...

Brand Name:Huba

Model Number:501.931003141

Place of Origin:china

Medium Liquids and gases Pressure range -1 ... 0 - 60 bar Output ratiom. 10% ... 90% 0 ... 5 V 1 ... 6 V 0 ... 10 V 4 ... 20 mA Accuracy < 0.5% fs Electrical connection Cable 1.5 m Connector DIN EN 175301-803-A or C M12x1 Pressure connection Inside thread...

Brand Name:BEDE

Model Number:C485 Style A1

Place of Origin:China

... to AISG C485, style A1 connector assembly, male end, 5 pins, mounting thread: M16 Pin layout is based on DIN EN 61076-2-106:2012-04 variant 08-a. All components 1. Insulator, PBT plastic, housing of gauges 2. Gauges / Contactor, copper materials, gold

Brand Name:DUOLI

Model Number:W(1C9)

Place of Origin:Zhejiang, China (Mainland)

... components (pumps, transmission lines, reversing valves, stop valves), Hydraulic motors, hydraulic cylinders, and some auxiliary elements, such as level gauges, thermometers, pressure gauges, etc., are joined together to form a

Place of Origin:Cangzhou, China (Mainland)

...DIN & ANSI & JIS & IFI Size: 1/2”-4”,M5-M64 Thread: unc,unf,metric thread Material: carbon steel, alloy steel, stainless steel Finish: Plain, ZincPlated(Clear/Blue/Yellow/Black), black oxide, H.D.G, DAC,GOEMET Packing: bulk in cartons (25kg Max.)+wood Pallet or according to customer special demand Application: Structural Steel; Metal Buliding; Oil&Gas; Tower&Pole; Wind Energy Test Equipments: Caliper,Go&No-go gauge

Brand Name:CF Steel

Model Number:1.2080 / D3 / SKD11 / Cr12

Place of Origin:China

...DIN AISI JIS Cr12 1.2080 D3 SKD1 Introduction: Grade 1.2080 / D3 / Cr12 is a kind of alloy tool steel, has a good hardenability and good wear resistance, mainly used as under impact load is small, high wear resistance of cold die and punch, cold cutting scissors, drill sets, gauge, wire drawing die, stamping die, thread rolling plate, drawing die and screw thread

Brand Name:DOUBLE-LIN

Model Number:LL5053

Place of Origin:China

... Valve Body: High-density forging, no blister, no air holes, no leakage. Made by special high precision CNC machines. Pressure Gauge: It can effectively monitor the pressure of pipe in real time. Filter: Made of stainless steel,