dr4 mpo connector qsfp dd msa

Brand Name:LR

Model Number:QSFP-DD-400G-DR4

Place of Origin:China

...DR4 module supports link lengths of up to 500m parallel SMF with MTP/MPO-12 connector. It is compliant to QSFP-DD MSA, IEEE 802.3bs protocol and 400GAUI-8 standards. The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane. It can be used as 4x100G breakout to QSFP28-DR-100G. Specification Part Number QSFP-DD-400G-DR4 Vendor Name LR Form Factor QSFP-DD...

Brand Name:Top-Trans

Model Number:TQSFPDD400G-DR4+

Place of Origin:China

Fiber Optic Transceiver QSFP-DD 400G 1310nm 2km DR4+ MPO Connector Sfp Switch Port Fiber Optic Transceiver Sfp Switch Port This product is a 400Gb/s Quad Small Form Factor Pluggable-double density (QSFP-DD) optical module designed for 2km optical ...

Brand Name:Trixon

Model Number:xxxx

Place of Origin:CHINA

Product Description: The 400G QSFP-DD DR4 Transceiver is compatible with a wide range of networking equipment and provides support for 100GBASE per lane in multimode fiber. With a data rate of up to 425Gbps (4x 106.25Gbps ), this transceiver can handle eve...

Brand Name:Linkopto / OEM

Model Number:40G BASE SR4 QSFP+ 850NM

Place of Origin:China

PN: 40G BASE SR4 QSFP+ 850NM 40G QSFP+ SR4 100M OM3 850nm MPO Connector QSFP Optical Transceiver Features QSFP+ MSA, SFF-8436 compatible MPO Connector Distance up to 100m over OM3 Fiber VCSEL array transmitter and PIN array receiver Electrically Hot-...

Brand Name:MODULELAND

Model Number:TQPM20D

Place of Origin:Hanoi, Vietnam

... Compliant with 40G Ethernet IEEE802.3ba and 40GBASE-LR4 Standard QSFP MSA compliant Up to 20 km transmission Compliant with QDR/DDR InfiniBand data rates Single +3.3V power supply operating ...

Brand Name:Comelink

Model Number:400G QSFP-DD DR4

Place of Origin:China

...fiber. The Transceiver complies with QSFP-DD MSA, IEEE 802.3bs protocol, and 400GAUI-8 standard. 400 Gigabit Ethernet signals are transmitted over four parallel channels on one wavelength per ...

Brand Name:OPTICKING

Model Number:KQSFC0-DR31SM10C

Place of Origin:China

...-LR1 optical interface 3. Compliant with QSFP-DD MSA HW Rev 5.1 4. Type 2 housing with MPO-12 connector 5. Compliant with QSFP-DD CMIS Rev 4.0 6. Maximum power consumption 10W 7. Case operating temperature 0°C to 70°C 8. Two wire serial Interface with

Brand Name:HILINK

Model Number:400G QSFP

Place of Origin:Guangdong, China

...QSFP-DD DR4 2km SMF Optical Transceiver Features QSFP-DD MSA compliant. Parallel 4 Optical Lanes. 100G Lambda MSA 100G-FR. Specification compliant Up to 2km transmission on single mode fiber (SMFwith FEC.) Operating case temperature: 0 to 70oC. 8x53.125Gb/s electrical interface(400GAUI-8). Data Rate 106.25Gbps (PAM4) per channel. Maximum power consumption 12W, MPO-12 connector...

Brand Name:E-link

Model Number:LNK-QDD-400G-DR4-05

Place of Origin:China

SFP Fiber Transceivers 400G DR4 QSFP-DD 500m DOM MTP/MPO-12 SMF SFP Fiber Transceivers Overview LNK-QDD-400G-DR4-05 module supports link lengths of up to 500m SMF with MTP/MPO-12 connector. It is compliant with QSFP-DD MSA, IEEE 802.3bs protocol and ...

Brand Name:E-link

Model Number:LNK-QDD-400G-DR4-2

Place of Origin:China

... with IEEE 802.3cu standards: - 4x 100GBASE-FR1 optical interface ► Compliant with QSFP-DD MSA HW Rev 5.1 - Type 2 housing with MPO-12 connector ► Compliant with QSFP-DD CMIS Rev 4.0 Transmitter Optical Specifications Parameter Symbol Min. Typical Max.

Brand Name:own

Model Number:QSFP-DD 400G DR4

Place of Origin:China

...DR4 QSFP-DD Optical Transceiver Module — 500m Reach, Low Power, CMIS 4.0 1.QSFP-DD 400G DR4 Product Overview The CC-QSFD04DR4-12D is a high-performance optical transceiver module designed for 400G Ethernet applications. It supports both 400G DR4 aggregation and 4x100G breakout modes over single-mode fiber up to 500 meters. Compliant with QSFP-DD MSA...

Brand Name:Guanglian

Model Number:OPTR-DS85S-C

Place of Origin:Made in China

400G QSFP-DD DR4 500m optical transceiver Guanglian’s 400GBASE-SR8 optical transceiver module supports link lengths of up to 100m over multimode fiber (MMF) with MTP/MPO-16 connector. It is compliant to IEEE 802.3bs protocol and 400GAUI-8/CEI-56G-VSR-PAM4 ...

Brand Name:Unifiber or OEM

Model Number:400GBASE-SR8 PAM4 850nm 100m

Place of Origin:CHINA

hot-pluggable QSFP-DD transceiver for 400G links over multimode fiber. It is a high performance module for short-range data communication and interconnect application. This module is designed to operate over multimode fiber systems using a nominal ...

Brand Name:Mray

Model Number:QSFP-40G-SR4

Place of Origin:Shenzhen, China

...-8436, INF-8438i and IEEE 802.3ba 40GBASE-SR4. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA. Features Up to 10.3Gb/s data rate per channel Distance up to 300m over a SMF nPPI(4x10G)

Brand Name:UTOPTEK

Model Number:QSFP-40G-SR4

Place of Origin:China

40Gb/s 100m QSFP+ Transceiver Hot Pluggable, MTP/MPO Connector, 850nm, VCSEL, Multimode 1.Features: 4 independent full-duplex channels Up to 11.2Gbps per channel bandwidth Aggregate bandwidth of > 40Gbps MTP/MPO optical connector QSFP MSA compliant Digital...

Brand Name:NuFiber

Model Number:QSFP28-100G-SR4

Place of Origin:China

QSFP28 100G SR4 Multimode 850nm 100m MPO Fiber Optical Transceiver 100g Qsfp28 Module QSFP28 100G SR4 MPO Connector 100GBASE-SR4 100G 850nm 100m QSFP28 SR4,100g qsfp28 sr4 (QSFP28-100G-SR4) QSFP28-100G-SR4 100Gb/s QSFP28 Transceiver MPO 100M MMF 850nm ...

Brand Name:OEM and ODM

Model Number:MPO Trunk Cable

Place of Origin:Guangdong, China

...MPO/MTP Trun cable patch cord, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. With US Conec MTP connectors and Corning SMF-28 ultra optical fiber, it is optimized for 40G QSFP+ PLR4 to 10G SFP+ LR, 400G OSFP/QSFP-DD DR4 to 100G QSFP DR and 400G OSFP/QSFP-DD XDR4 to 100G QSFP...

Brand Name:TAKFLY

Model Number:MPO/MTP Patch Cord

Place of Origin:Shenzhen, China

...MPO Fiber Trunk Cable for 10G 40G 100G 400G High-Density Data Center Application MTP/MPO trunk cable, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. It is optimized for 40G QSFP+ PLR4, 100G QSFP28 PSM4, 400G OSFP DR4/XDR4 and 400G QSFP-DD DR4/XDR4 optics direct connection and high-density data center applications. Fiber Optic MTP/MPO-MTP/MPO

Categories:MTP MPO Cable

Country/Region:china

... and space saving. The Cable assemblies are used in 40G QSFP+ PLR4 to 10G SFP+ LR, 400G OSFP/QSFP-DD DR4 to 100G QSFP28 DR and 400G OSFP/QSFP-DD XDR4 to 100G QSFP28 FR optics direct connection and high-density data center applications. Fiber Mall' s

Brand Name:YXFiber

Model Number:YXF-QP-S31M-2D

Place of Origin:Hubei, China

... with integrated Digital Diagnostic monitoring; QSFP+ MSA package with single MPO(APC) connector receptacle; Single +3.3V power supply; Maximum power consumption 3.5 W; Operating case temperature: 0 to +70 °C; Complies with QSFP+ MSA: SFF-8436 and