e26 go and not go gauges

Brand Name:SHC

Model Number:SC-E26C1

Place of Origin:China

...29L-4 “NOT GO” GAUGE FOR CAPS E26, E26/50x39, E26/51x39 & E26d 7006-29-3 GAUGE FOR TESTING CONTACT-MAKING OF LAMPS FITTED WITH CAPS 7006-29A-2 GAUGE FOR CAPS ON FINISHED LAMPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT E26d 7006-29B-2 GAUGE WITH

Place of Origin:China

Brand Name:Julixing

... on finished lamps. Testing: When the cap on a finished lamp has been screwed into the gauge as far as it will go, the centre contact shall touch surface X. When the lamp is removed from the gauge, at least two full turns shall be required to disengage the

Brand Name:Kingpo

Model Number:KP-7006-27D-3

Place of Origin:china

E26 Lamp cap gauge | go gauges for caps E26-7006-27D-3 “GO” GAUGE FOR CAPS CALIBRE «ENTRE» POUR CULOTS E26, E26/50x39, E26/51x39 & E26d Dimensions in millimetres - Dimensions en millimètres The drawing is intended only to illustrate the essential dimensions of the gauge. Le dessin a pour seul but d’illustrer les dimensions essentielles du calibre. For details of caps E26, E26/50x39, E26...

Brand Name:PEGO GROUP

Model Number:PG338

Place of Origin:China

...test postive and negative toruqe of the lampcap, the test range is from 0 to 10N.m. The digital torque meter equips with E27/E26, B22d, E14/E12, G5/G13 clamps and torque gauges, the upper limit can be preset to alarm, it is a simple and effective meter for

Brand Name:Sinuo

Model Number:SN993

Place of Origin:China

... Go” gauges are manufactured according to relative requirements of IEC 60061-3, they are required by UL 496 2013 clause 5.2.4.2. These lampholder gauges are used to check whether the dimensions and shapes of the lampholders meet standard requirements by

Place of Origin:Guangdong, China

Brand Name:KUNCAN

Model Number:KC-US-E12

... E12 E14 E26 E27 Cable Gauge H05VV-F 3*0.75MM/1.0MM/1.5MM; SVT/SJT/SJTO/SJTOW 18/16/14AWG/3C Rating 10A/13A/...

Place of Origin:Jiangsu, China

Brand Name:Chenye

... uses four-bar mechanism, short stroke latch needle; EBA; fabric take-upelectronically controlled and electronic batching device. *Gauge:E18,E22,E24,E26,E28,E30 *Number of bars:6 *Take-up Manner: Separately-standing take-up. Machine

Brand Name:QIAOPU

Model Number:QP2-DTX-105

Place of Origin:Yuyao,Ningbo

... by U.L Description Salt Lamp Cord with Dimmer Switch 1st Connector USA 2 pin plug 2nd Connector E14/ E12/ E26/E27/ B22 socket Bulb 10W / 15W/ 20W/25W Cord Type SPT-2 18AWG Wire Gauge 18AWG Cable Length (M) 1.8M/3M or OEM Sample Supported