ei100 laminated iron core in transformer

Brand Name:CENTERSKY or Designed Accoeding to customers' demand

Model Number:Single Phase EI 41, EI 48, EI 57, EI 66, EI 85.8, EI 96, EI 114

Place of Origin:Jiangyin, Jiangsu, China

Single Phase and Three Phase EI Transformer Core Lamination We are the specializing factory of EI LAMINATION,SILICON CORE,LAMINATION CORE,EI Ferrite Core,Plastic Bobbin in Jiangyin,Jiangsu China. Introduction: Single phase EI core is made by the silicon ...

Brand Name:STT

Model Number:FZT-1T

Place of Origin:China

... iron core. With a hydraulic staion, the transformer core stacking table can tilt the stacked core up to 90° for taking it away from the table easily. The transformer core stacking table can be easily operated with a hand held controller. Quick details of

Place of Origin:JiangSu,China

Model Number:Customer settings

Brand Name:HengTong

Company Information Jiangyin Hengtong Electrical Equipment Co., Ltd, was established in 1989. It is located at the foot of the beautiful Phoenix Mountain in Jiangyin City, Jiangsu Province, China, covering an area of 35,000 square meters. The company is ...

Brand Name:Zhutang

Model Number:FZT-5T

Place of Origin:China

...Iron Core Stacking Table For Laminating Transformer Silicon Steel Description Hydraulic Iron Core Stacking Table For Laminating Transformer Silicon Steel FZT-1T is a special equipment for stack different sizes of silicon steels, the stacked silicon steel is mainly used as transformer core...

Brand Name:KNKONG

Model Number:S13(14) M.RL

Place of Origin:China

...ee-phase wound core transformer is different from the traditional planar laminated core transformer. The iron core is composed of a three-phase column yoke arranged in a three-dimensional triangle with a single frame. Each column is continuously coiled by

Brand Name:Gnee

Model Number:Cold Rolled Electrical Steel Coil

Place of Origin:Henan

CRGO Cold Rolled Grain Oriented Electrical Silicon Steel Coil for Three Phase Transform Iron Core Ferro Lamination Electrical steel (silicon steel sheet) is mainly divided into two categories: grain-oriented electrical steel and grain non-oriented ...

Brand Name:HEMEI

Model Number:66*18*2MM

Place of Origin:China

...Core Mu 85 is a soft magnetic nickel-iron alloy with about 80 % nickel, 4.8 - 5.2 % molybdenum, a saturation induction of approx. 0.7 T, the highest technically obtainable permeability, and a very low coercive force. Typical applications are toroidal tape-wound cores, laminations, shieldings, electromagnetic relays. current transformer...

Brand Name:ZXY

Model Number:EI42

Place of Origin:Huizhou.China

...Transformer Welded Lamination Core 1.Product Description The EI42 low-frequency power transformer adopts a welded laminated iron core structure, which is precisely pressed from high permeability silicon steel material and designed specifically for 50/60Hz low-frequency environments. This transformer...

Brand Name:Tianan Electric

Model Number:TA-1547

Place of Origin:China

...h high quality, low-loss, and no time effect, sheared by Geroge line and with no burr. 1.2 Iron core adopts pulling board structure, the upper and down yoke is clamped by board, to form the frame structure. The iron core adopts advanced lamination process,

Brand Name:HENGFENGYOU

Model Number:s11

Place of Origin:China

... transformers especially suitable for certain occasions of power shortage, wide load fluctuation and unreachable maintenance, which adopts amorphous alloy core instead of traditional laminated iron core, and have the advantages of much lower loss,

Brand Name:METS

Place of Origin:XIAMEN.CHINA

...lamination sheets , inverter power electronic transformer C type iron core Motor stator and rotor Stampings We can manufacture laminations in all grades of silicon steel including fully or semi processed steel in the form of Stators & Rotors, Field & Armatures in loose as well as Interlocked & Auto Riveting Cores...

Brand Name:WINLEY

Model Number:8KVA

Place of Origin:CHINA

... and manufacturing process. 1.The iron core of the product is laminated with imported low-loss and ultra-thin cold-rolled silicon steel sheets, with low loss. 2.High-temperature-resistant and high-...

Brand Name:XG

Model Number:S11

Place of Origin:XIAN,CHINA

1. S11 11KV 33KV 20A -5000A 3 Phas H.V. Oil Type Power Transformer 1.1. Magnetic Core The three-limb iron core is made of oblique cut Grain-oriented, seven-step silicon steel lamination insulated on both sides, guaranteeing low losses and low noise. These ...

Brand Name:GA

Model Number:E496341

Place of Origin:CHINA

...powder, iron powdered, amorphous, ferrites, and others. Silicon steel and nickel iron are available as tape wound cores or laminated pieces. Non-magnetic toroids are also available to make air core toroidal inductors. Butler Winding can make (and has made)

Brand Name:AUTOFOR

Model Number:ATF171101

Place of Origin:China

AUTOFOR PRECISION TRANFORMER CUTTING MACHINE It's widely used for magnetic core same as transfomer core,silicon steel, amorphous, nanocrystalline, permalloy, Sendus,and the material of alloy metal such as ball cage, ball head, cast iron, carbon steel, die ...

Place of Origin:Suzhou, China

Brand Name:AIWEN

Model Number:SH-PAW-HyMu80

...iron-molybdenum alloy with extremely high initial and maximum permeability and minimum hysteresis loss Typical composition (%): 0.02 C, 0.50 Mn, 0.35 Si, 80.00 Ni, 4.20 Mo, Bal. Fe Application of HyMu 80 Alloy STRIP /1J79 alloy strip: HyMu 80/1J79 has been used primarily for transformer cores, tape-wound toroids, shielding and laminations...