electrical testing automated probe station

Brand Name:AIP

Model Number:AIP89**

Place of Origin:China

Fan Motor Stator Testing Machine Of Ceiling Fan / Table Fan / Wall Fan 1. Test: AC Hipot, Insulation resistance, surge, winding resistance 2. Fixture: customized fixture device to adapt the different tested stator 3. Technical parameters AC Hipot:apply AC ...

Brand Name:Truth Instruments

Model Number:PS1DP-Cryo

Automated Cryogenic Probe Station With 3T Superconducting Magnet Product Description: The Cryogenic Vertical Superconducting Magnetic Field Probe Station is a cutting-edge instrument designed for precise measurements in a variety of research and testing applications. This advanced probe station...

Brand Name:HongCe

Model Number:HT-I02

Place of Origin:China

.... This probe is designed for electrical product safety testing. It simulates the characteristics of human fingers to evaluate the accessibility of electrical enclosures and ensure the safety of electrical products during use. It is an indispensable tool in

Brand Name:OptoElectronics

Model Number:OP-PS -25-f

Place of Origin:China

...Probe Station Specialized Testing Device Mag Probe station manual adujestable probe station A probe station is a specialized testing device used in the semiconductor industry to measure the electrical properties of individual components on a semiconductor wafer. It consists of a base with a flat surface, on which the wafer is placed, and a set of probes that make contact with the components on the wafer. The probes

Brand Name:SHC

Model Number:SC-Kit 1

Place of Origin:China

...Test Probe Kit Electric Safety Check Device List: IP1X Test Probe A IP2X The Standard Test Finger Probe IP3X Test Probe C IP4X Test Probe D IEC60335 Test Probe A Specification: IP1X Probe A /Test Probe A 1, According to: IEC61032:1997 /IEC60529:2001 and UL 2, IP1X Probe A (Test Probe A) is necessary appliance for household and similar electrical appliance of against electric shock protection test...

Brand Name:PEGO

Model Number:PG-TPC

Place of Origin:China

.... 2. Test Sample of IP3X Test Finger Probe: Easily accessible enclosure live parts or mechanical parts. 3. Introduction of IP3X Test Finger Probe: The IP3X Test Finger Probe is designed according to IC61032 figure 3, meet the requirements of IEC60529-IP3,

Brand Name:HJ

Model Number:HT-U02, HT-U03

Place of Origin:China

... 8.2 Probe for film-coated wire. Application: It is used for the testing of coating lines of the enamel (i.e., transformers and inductors). And for the performance of the electrical equipment enclosure preventing electric shock. Feature: Nylon handle +

Brand Name:KingPo

Place of Origin:China

...Test Finger Probe For Electrical Equipment Enclosure PA130A UL Probe Product Details This probe conforms to standard requirement of UL507-2006(PA135A) Figure 9.1, UL749 Figure 1, UL982 Figure 58.6 and UL1278 Figure 8.1(PA130A). It is used for the performance of the electrical equipment enclosure preventing electric shock. 8 Accessibility of Live Parts 8.1 An electrical...

Brand Name:Kinte

Model Number:WH-8601

Place of Origin:Guangdong,China (Mainland)

GB4706.1 Standard Test Finger Pin Electrical Test Probes WH-8601 Standard test finger, pin (test probe), pin: meet the standards: GB4706.1, GB8898-97, GB2099.1-96, IEC884-1 the corresponding provisions of the requirements.

Brand Name:kerang

Model Number:HT-I01

Place of Origin:CHINA

Test Sphere Probe HT-I01 Standard:IEC61032 fig.1, IEC60529 IP1 and IEC60065. Application:This probe is intended to verify protection the back of hand of persons against access to hazardous parts. It is also the necessary probe used to prevent the hazardous...

Brand Name:Sinuo

Model Number:SN2210-6T

Place of Origin:China

IEC61032 figure 6 probe 2 test sphere probe Ф12.5mm With 0~50N Force Product information: This test sphere probe confirms to IEC61032 figure 6 probe 2, it is required by IEC 60335-1 clause 22.1 and etc. It is intended to verify the degree of protection of ...

Brand Name:PEAKMETER

Model Number:T3002

Place of Origin:China

1000V/10A Digital Multimeter With Gold-Plate Test Probes And Pen-Typing Lead Probe Wire Features Probe Length: 120mm/Probe Tip Ø2mm Probe Plug: Ø4mm Cross Plug, Right angle type Probe Wire: 22AWG, red/black Length: 800mm Safety Class: EN61010-031, 1000V ...

Brand Name:kingpo

Model Number:UL Test Probes

Place of Origin:china

... – Probes for verification Applications: To verify protection of persons against access to hazardous live parts or hazardous mechanical parts To verify protection of equipment against ingress of solid ...

Place of Origin:China

Brand Name:Nide

Model Number:ND-ATA-812A

...Testing Equipment For Electrical strength , Double Working Station Quick Detail: 1. This testing panel is used for testing armature. 2. Testing parameter is settable and can be saved. 4. All testing items are done automatically at one time fast. 5. Testing data can be saved, printed and called out. 6. Double working station. 7. Industrial Computer control. 8. DOS system. Specifications : Testing...

Brand Name:QuanStar

Place of Origin:Shanghai

The typical product categories that can be tested by this equipment are as follows: I. Electronic Products Circuit Boards: Including various PCB boards, power supply boards, controller boards, etc., which can be comprehensively inspected for electrical ...

Brand Name:Lonroy

Place of Origin:China

Model Number:LR-G30

... to touch the electronic testing. IEC60065 12mm test finger probe with 75N thrust Nodular Finger Length 80mm Nodular Finger Diameter 12mm Dam-board Diameter 50mm Test Force 15N Standard IEC61032 IEC60065 IEC60335-1 IEC60884-1 Product overview: In line with

Brand Name:Sinuo

Model Number:SNQC1001-2A

Place of Origin:China

... stations for electric vehicles NB/T 33002-2018- Technical specifications of AC charging piles for electric vehicles GB/T4208-2017 Shell Protection Class (IP code) IEC60529:2013 Degrees of protection provided by enclosure (...

Place of Origin:China

Brand Name:Julixing

...Test Finger Probe B with 10N Force for IPX Test Equipment Force Level: 10N 1. Conforms to: Standard IEC 61032-1997, IEC 60529-2001, GB/T4208-2008 and UL etc. 2. The Standard Test Knurled Finger Probe is the necessary appliance to prevent electric shock for household and similar electrical...