feeding tank evacuated tube solar collector

Brand Name:PASSION/OEM

Model Number:1000L

Place of Origin:CHINA

...Evacuated Tube Solar Collector With Feeding Tank Technical data Vacuum Tube borosilicate glass 3.3 Tube Coating Three layers coating, tri target tube Tube Dimension 58mm*1800mm Manifold inner material SUS304-2Bstailess steel Manifold outer material Aluminum alloy Bracket Aluminum alloy or stainless steel Insulation Foam 40mm polyurethane foam Number of Tubes 20, 30, 40, 50 Description Non-pressure solar collector

Brand Name:SolarShine/OEM

Model Number:25-50T/58X1800

Place of Origin:China

...tank: Outer tank is made by 201# /SUS304 2B stainless steel. 2. Strong inner tank with SUS3042B stainless steel up to 0.41mm. 3. High efficiency vacuum absorber tubes. 4, Stainless steel mounting floor stand. Vacuum tube solar collector is a new type of solar collector with higher efficiency, simpler installation and lower cost than traditional flat plate solar collector. It is widely used in solar...

Brand Name:BABYSUN/OEM

Model Number:BS-VTC

Place of Origin:CHINA

... solar directly to the water. The insulated tank keeps the water warm and comfortable at all times. The vacuum tubes solar collector is easy to maintain, heats your water for free, and will result in savings on your gas or electricity bill right away. (1)

Brand Name:Dr.X Solar

Model Number:DX-HCA-20

Place of Origin:Changzhou, China

Evacuated tube solar collector Specialty: 1. High heat collecting efficiency, and high temperature output. 2. Quick operation under pressure. 3. Strong freezing resistance, no water leakage problem. 4. easy installation, and convenient maintenance. 5. ...

Place of Origin:China

...Tank insulating layer 40mm high-density polyurethane foamed Inlet and outlet hole 110mm Gross area 8 Tube quantity 50 tubes Power output 1500W-3000W Flow rate 200 Output temperature of air 50-205℃(adjustable according to system controller) Solar collector tube 3.3 Borosilicate glass wit...

Place of Origin:China

.../N/AL selective coating on the outer wall of the inner tube absorbs sunshine and transforms it into heat which in turn heats the cold water in the inner tube. When the water in the tube is heated, its density will decrease and will go upward into the tank;

Place of Origin:China

Brand Name:Easwon

Model Number:ILS1-5818H15-100P-106/5

...tube solar hot water system Technical Parameters Heat Pipe Solar Collector Spec.(mm) Φ47×1500 Φ58×1800 Tube (pcs) 12 / 15 / / 20 / 25 / 30 Vacuum Tube Borosilicate glass, red copper heat pipe, aluminum fin Manifold Copper flow passage, PU insulation, Aluminium alloy shell Water Tank Capacity 100 ~ 500L for storage tank Inner Tank...

Categories:Solar Collector Water Tank Production Line

Country/Region:china

Ordinary punches are equipped with both electrical and mechanical operating mechanisms, enabling them to perform a variety of sheet metal processing tasks such as punching, flanging, stretching, and forming. With a simple structure and flexible operation...

Brand Name:Altrasonic

Model Number:HS-G2030A

Place of Origin:China

...solar collector panels, solar cell welding, suitable for full-circle aluminum strips equipment for automatic feeding and automatic cutting. It is applied to the welding processing of solar panels, solar collectors, solar collectors, aluminum-plastic composite pipes, electric heating appliances (heating tube...

Brand Name:CIPING

Model Number:CP-CN

Place of Origin:China

...tube Vacuum Blood Collection Tube Of Evacuated Tube Solar Thermal Collectors 1.Product Introducation: Clot activator tube is used in the blood collection for biochemistry and immunology in medical inspection. It is suitable for wide range of operating temperature. With special treatment, the tube...

Brand Name:YICHENG

Model Number:EDPM series

Place of Origin:China

... vacuum tubes. 2. Collector separates with the storage tank, the tank can be put anywhere of the house 3. The pipe is made of red copper and conducted by heat transfer medium fluid, water does not flow in the vacuum tubes. Controller for collector has

Brand Name:olyair

..., then discharge to heat exchanger of the solar collector, In sunshine time ,the vaccum tube can absorb the sunshine to heat the water of the water tank, then the hot water will translate the heating to refrigerant by the exchanger, then help the

Brand Name:Mind

Model Number:80

Place of Origin:Henan, China

...Tank, Cement Silos, Steel Storage Bins Product Descriptions of Steel Storage Bins: China cement silo has the following parts: horizontal cement silo body steel structure part, the ladder, guardrail, feeding tube, dust collector, pressure relief valve, high and low level meter, the discharge valve, etc. China cement silo has a cylindrical structure, and the bottom is supported by four round tube...

Brand Name:SSEDU

Model Number:CE 250

Place of Origin:China

... out of a feed tank via a vibrating trough into an air flow. An interchangeable injector disperses the solid in the air flow. The air flow transports the solid upwards in the tube. The transport terminates in a collector tank. Depending on the velocity and

Brand Name:tisco

Model Number:AISI 445, EN 1.4621, DIN X2CrNbCu21

Place of Origin:China

... to corrosion and is well suited for a wide range of applications, typically used for hot water tanks and tubing, heat exchangers, solar collector panels, food processing and handling equipment, sinks and architectural panels. Grade 445 is stabilized with