ferro silicon slag reducing hysteresis loss

Brand Name:ZHENAN

Model Number:FeSi 75% 72% 65%

Place of Origin:China

Ferro Silicon Alloy With 75 Silicon Content Durable Grey Briquette For Steel Desulfurization​ Ferro Silicon alloy with 75% silicon content in durable grey briquette form is highly effective for steel desulfurization processes. The high silicon concentration not only aids in deoxidation but also assists in binding sulfur as silicon sulfide, transferring it into the slag phase and thereby reducing...

Brand Name:CENTERSKY

Model Number:UI 20---UI 100

Place of Origin:JIANGYIN

... of silicon steel is less, so hysteresis loss can be reduced. Introduction: Single phase UI core is made by the silicon steel strip. The model of UI lamination in standard sizes is from UI 20-UI 100.The gap sizes of transformer lamination ...

Brand Name:Shougang

Model Number:50SW800

Place of Origin:China

...Silicon Steel Non-Grain Oriented Silicon/Electrical Steel Coil Silicon steel, also known as silicon steel Sheet or Electrical Steel, it is a ferro-silicon soft magnetic alloy steel with very low carbon content, usually containing 0.5% to 4.5% silicon. The addition of silicon can increase the resistivity and maximum permeability of iron to reduce the coercivity, iron loss and magnetic aging. The difference between oriented silicon

Brand Name:ZXY

Model Number:EI41

Place of Origin:Huizhou.China

... has the characteristics of low hysteresis loss and low eddy current loss, which can effectively conduct magnetism, enabling transformers to efficiently convert energy during operation, reduce iron core heating, and improve transformer efficiency and

Brand Name:HENGFENGYOU

Model Number:10kv

Place of Origin:China

...lamination insulated on both sides, guaranteeing low losses and low noise. These values are even improved by laser treatment. It is protected on the surface with a flash-proof varnish in order to prevent the sheet from corrosion and to reduce the noise. 2.