figure 1 impulse voltage test probe

Brand Name:Sinuo

Model Number:SN-BS04

Place of Origin:China

...Figure 1 Test Pin For Impulse Voltage Test Probe Diameter 1mm Product information: The test pin conforms to BS1363-1: clause 12.6.1 b), figure 1, BS1363-2 clause 9.1.1 FIGURE 1. Technical parameters: Name Value Probe diameter Ф1 0 -0.05 mm Insulating material diameter Ф8 0 -0.05 mm Handle diameter Ф20 0 -0.05 mm Probe...

Brand Name:Pego Electronics

Model Number:LSG-255

Place of Origin:China

IEC61010-1 Clause 6.8.3.3 EMC Tester Impulse Voltage Generator with 12KV Output Voltage 1. Introduction The impulse voltage generator is manufactured according to the requirements of Appendix D and Figure D.1 of IEC62368-1, clause 14 of IEC60335-1, clause...

Brand Name:kingpo

Model Number:IEC62368-1-Figure V.3

Place of Origin:china

...Figure 2C / IEC62368-1 Figure V.3 Blunt Probe Testing the Limited Access to Telecommunications Voltages The Blunt probe is required in IEC62368,IEC 60950,IEC 60065, UL and CSA Standards. It is used to check the limited access to Telecommunications voltages (TNV), mainly telephone jacks and operator areas. Satisfies basic standard for telecom product safety. Meets Requirements for Testing...

Brand Name:GENY

Model Number:Bluetooth Optical Probe

Place of Origin:China

...Probe for Meter Testing Accessory 1. Introduction BTIR is a transparent data transmission module used for meter reading. It transfers IR data to mobile application via Bluetooth low energy 4.2. It provides a new way to read meter data by optical port. Figure 1 Parameters 　 Parameter Description 1 Battery 100mAh 2 Charging voltage...

Brand Name:HongCe

Model Number:HT-I09

Place of Origin:China

IEC60950-1 Test Pin For Information Technology Equipment Test , Tip Diameter 3mm IEC60950-1 clause 2.1.1.1 Access to energized parts c) A test with the test pin, Figure 2B, which shall not contact bare parts at HAZARDOUS VOLTAGES when applied to openings...