figure 11 measuring gauges

Brand Name:Sinuo

Place of Origin:China

Gauges Product Information: These measuring gauges confirm to the standard of IEC 60884-1:2013 clause 9, BS1363-1, BS 1363-2 and BS 546, which are used for the dimensional measurement and verification of the plug socket for household and similar use. The specific measuring gauges are made according to following: Serial No. Name Figure No. Standard Quantity a Go Gauge for Socket-Outlet Figure 11 BS 1363-2 2 b Contact Test Gauge Figure...

Brand Name:JLX

Model Number:LX-3611

Place of Origin:Made in China

...Figure 11 Go Gauges for Socket-Outlet Socket test samples through using the gauge to check whether the relative position of the hole, the size and depth of the hole, and whether the socket joint surface had fit to the standard requirements. There are two specifications of the go gauge, large and small. 1. Application: This plug and socket test gauge...

Brand Name:kingpo

Place of Origin:china

BS1363-2:1995 Figure 11|Go Gauge For Socket-Outlet

Brand Name:HongCe

Place of Origin:China

... NO. Gauge name 1 AS/NZS3112 figure 3.1 Gauge for depth of no-contact test 2 AS/NZS3112 figure 3.6 Device for checking the resistance to lateral strain (Three-pin gauge) 3 AS/NZS3112 figure 3.7 Device for checking the resistance to lateral strain (Two

Brand Name:SHC

Model Number:SC-UL498

Place of Origin:China

...Measuring Gauge For Retention Of Blades Test Gauge list: NO. Product Name Standard Figure Model Old Version New Version 1 Articulate probe with web stop Figure 9.1 Figure 9.1 U8-F91 2 Probe Figure 10.1 Figure 10.1 U8-F101 3 Flat probe Figure 31.1 Figure 31.1 U8-F311 4 Reference plug Figure 69.1 Figure 73.1 U8-F691 5 Typical test apparatus Figure 69.2 Figure 73.2 U8-F692 6 Improper insertion test blades Figure 94.1 Figure...

Brand Name:KingPo

Place of Origin:China

...Measuring Gauge BS1363 Plug Socket Measuring Gauge They are the necessary testing devices used in the laboratory and measurement test department. The specific measuring gauges are included as follows: GB1002-2008 measuring gauge: No. Name Standard figure quantity remarks 1 Measuring gauge for single phrase two-pole socket Figure 6 1 6A and 10A are used universally 2 Measuring gauge...

Brand Name:Sinuo

Model Number:SNQC1011

Place of Origin:China

IEC 62196-1 Gauges on Figure 11 EV Connector Testing Equipment Complied Standards & Clauses The gauges conform to IEC 62196-1:2022 clause 13.2.1 fig 11. Product Overview it is a specially developed automated intelligent test detection system, the test sys...

Brand Name:Mercury-tech

Model Number:LDM1025 LDM2025

Place of Origin:China Zhengzhou

...Measurement Tools Laser Diameter Measuring Gauge. Compact laser diameter gauge LDM1025 LDM2025. 1. A brief introduction LDM1025 Single axis compact laser diameter gauge is the high-accuracy installment that uses the laser scan to carry on Non-contact the on-line measurement. It is mainly used in measuring...

Brand Name:RAYTECH

Model Number:RTG900

Place of Origin:China

...chemical equipment, boilers, oil storage tanks, etc. in industries of petroleum, shipbuilding, power station, and machine manufacturing. Materials measured: 11 types of materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass,

Brand Name:Kingrail

Model Number:LJ-GM-A

Place of Origin:China

...Measuring Equipment , Kingrail Rail Wear Measuring Gauge ODM Mechanical rail wear gauge(rail head loss gauge) is mainly used to measure the vertical wear and lateral wear of the rail. The reasonable design makes it convenient operation and intuitive reading. BENEFITS of Mechanical Rail Track Measuring Equipment , Kingrail Rail Wear Measuring Gauge ODM Mechanical rail wear gauge...

Brand Name:KYKY

Model Number:ZDF-91B2

Place of Origin:China

...Gauge , ZDF-91B2 , 10E5 to 10E-5 Pa , 6 loops , Modbus Model ZDF-91B2 compound vacuum gauge is composed of 2 sets of low vacuum measuring units and 1 set of high vacuum measuring units. One unit of resistance gauge (RG 2)is used to achieve the measurement (1.0×10E5Pa～1.0×10E-1Pa)independently, the unit of resistance gauge( RG1) combined with ionization gauge, as compound unit, is to achieve the continuous control and measurement

Brand Name:HUATEC

Model Number:TG5500D

Place of Origin:Beijing

...Gauge High Precision thickness gauge calibration ultrasonic thickness testers Thickness Measuring Gauge Thickness Gauge Calibration Ultrasonic Thickness Testers Usage Widely used to measure the thickness of metal materials. Especially display its advantage for measuring the thin piece and high precision measuring...

Brand Name:Mercury

Model Number:LDM-25XYT LDM-50XYT LDM-100XYT LDM-25 LDM-50 LDM-100B LDM-150

Place of Origin:China Zhengzhou

... (namely X axis and Y axis) simultaneously measure the diameter in two directions. It is applicable to measure and control the diameter of metal wires, glass, pipes, wire and cable, etc. It is overcomes the shortcomming of bi-directional measurement. The

Brand Name:HTTS

Model Number:LDM-10B

Place of Origin:CHINA

...the no-contacts on-line measurement. It is mainly used in measuring of outer diameter , to control the outside diameter. It is applicable to measure and control the diameter of metal wires, glass, pipes, wire and cable, etc. It can also be applied to the

Brand Name:HUATEC

Model Number:TG-6000F5

Place of Origin:Beijing

...；2.4 inches TFT color screen；Bluetooth 2.0 wireless communication technique； We develop our own PLL technique to make measuring work more stable；inverted display,display in English,multi measuring mode and so on, These features can make gauge more

Place of Origin:China

Brand Name:KeRang

... and verification of the plug socket for household and similar use. They are the necessary testing devices used in the laboratory and measurement test department. The specific measuring gauges are included as follows: GB1002-2008 measuring gauge:

Brand Name:KACISE

Model Number:KLD804

Place of Origin:CHINA

... measurement. This transmitter sensor is engineered to precisely detect the level of liquid in water tanks. The 80G radar technology offers enhanced sensing ...

Brand Name:HJ

Model Number:HT-I05

Place of Origin:China

IEC61032 Test Finger Probe Figure 11 Test Probe 17 With 0.5mm Diameter Wire Standard: IEC 61032 ‘Protection of persons and equipment by enclosures – Probes for verification’ figure 11 test probe 17. Application: Other access probes to verify protection of ...

Brand Name:UNS

Model Number:UNS10-2

Place of Origin:CHINA

... metric for ensuring correct thickness of pavement stripes. This is a necessary means for the production, quality supervision, engineering construction, supervision and other units to measure the thickness of road markings.

Brand Name:HT SENSOR

Model Number:BPK-IIIN

Place of Origin:Baoji，China

Industrial Digital Pressure Gauges with High Precision Measurement BPK-IIIN Pressure Gauge/Switch Introduction: The BPK-III series controllers are equipped with display, control, and transmission functions, and have been widely utilized in various ...