figure 7 iec 61032 test probe

Brand Name:HJ

Model Number:HT-I07

Place of Origin:China

...Test Finger Probe Figure 7 Test Probe 11 Unjointed Test Finger Standard: IEC 61032 ‘Protection of persons and equipment by enclosures – Probes for verification’ figure 7 test probe 11. IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ Application: Other access probes to verify protection of persons against access to hazardous live parts or hazardous mechanical parts This probe...

Brand Name:Sinuo

Model Number:SN2210-5

Place of Origin:China

IEC 61032 Test Probe 1 Figure 5 Ф50mm For Enclosures Against Ingress Test Product information: This probe conforms to standard requirements of IEC 61032 test probe 1 figure 5, and required by many standards such as IEC 60529 for IP1 testing, IEC 60335-1, IEC 60065 and etc. This test probe...

Model Number:TP12

... of stainless steel with a plastic handle. Meets IEC 60950 and 61032, Figure 9 (Test Probe} Model TP12 Short Test Pin Probe Used to test accessibility through enclosure openings per IEC, EN, UL and CSA Standards. Body is plastic, tip is stainless steel.

Brand Name:JLX

Model Number:LX-61032

Place of Origin:Made in China

... IEC 61032 Figure 1 - Test probe A IEC60529 IEC61032 Ball diameter: 50 mm Baffle plate diameter: 45 mm Baffle plate thickness: 4 mm Handle diameter: 10 mm Handle length: 100 mm Material: Nylon + stainless steel LX-1202 IEC 61032 Figure 2 - Test probe B ...

Brand Name:HongCe

Model Number:HT-I02B

Place of Origin:China

...Test Finger Probe B With Baffle Diameter 125 mm Standard: IEC60335-2-14 IEC 61032 figure 2, IEC60950 figure 2A, IEC60884, UL507, and UL1278 figure 8.4. Application: This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. Test Finger Probe Test...

Brand Name:KingPo

Place of Origin:China

... confirms to the IEC61032 figure 17 and IEC60335 standard requirements. It is used for testing the protection of thermal radiation heaters which are fixed or portable visibly. Standard:IEC61032 figure 17 and IEC60335. Application:It is used for testing the

Brand Name:PEGO

Model Number:PG-TP31

Place of Origin:China

IEC61032 Test Probe 31 Test Cone Made by Nylon Third - Lab Calibration Certificate Available Introduction: It is designed according to IEC61032 figure 14, this probe is intended to verify the protection against access to hazardous mechanical parts of the ...

Brand Name:kingpo

Model Number:IEC61032-Fig2

Place of Origin:china

material: metal, except where otherwise specified linear dimensions in milimeters tolerance on dimensions without specific tolerance: on angles: 0/-10° on linear dimensions: up to 25mm: 0/-0.05 over 25mm: +/-0.2 both joints shall permit movement in ...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

Product Description Complies with IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing...

Brand Name:SHC

Model Number:SC-F1218

Place of Origin:China

IEC 61032 Figure 12 Test Probe 18 Small Finger Probe Ф8.6 This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children of more than 36 months and less than 14 years. Probe Dimension: Parameters /Model Children’s finger probe SC-F1218 Hemispherical radius (mm) R4.3±0.05 Finger probe...

Brand Name:Lonroy

Place of Origin:China

IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Technical specification Test...

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

...Test Probe EVSE Testing Equipment Equipment Overview This is a precision test finger made in accordance the requirements of IEC 61032 test probe, required by many standard such as IEC 61851-1 clause 8 and 12.4, IEC 60529 IP2, etc. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test...

Brand Name:kerang

Model Number:HT-I27

Place of Origin:CHINA

...:It is used for interlocking apparatus of the covert door of microwave oven. Test sample:Microwave oven. Feature:Please use according to related standard. Parameters: Model HT-I28 Probe diameter Ф3 0 -0.10 Handle diameter Ф10 Probe length 100±0.2

Brand Name:szcx

Model Number:CX-T4D

Place of Origin:china

...IEC 61032:1997 / IEC 60529:2001 / IEC 60065 / IEC 60598 and UL 2. IP4X Test Probe D ( Test Probe D) is the necessary tool to proceed protecting electric shock test of household and similar electrical appliances. Technical parameters: 1. Wire length: 100 mm 2. Wire diameter: 1.0 mm 3. Circular-baffle diameter: 35 mm 4. Handle diameter: 10 mm 5. Handle length: 100 mm 6. According to IEC 61032 figure 4 (the Test