flame height measurement flammability testing equipment

Brand Name:HJ

Model Number:NF-2

Place of Origin:China

...Flame Tester C60695-1-5 Standard Flame Height 12±1mm Flammability Testing Equipment Product Introduction NF-2 Needle Flame Tester is a professional Flammability Testing Equipment. This equipment is dedicated to accurately testing the flammability of products. By simulating the needle flame...

Brand Name:HongCe

Model Number:NF-1

Place of Origin:China

... to the requirements of the relevant standards IEC60695-11-5, the needle-flame tester is the special instrument used for the fire hazard test of the small flame caused by the fault conditions in the simulating technology assessment equipment. It is

Model Number:LR-K003

Place of Origin:China

Brand Name:Lonroy

IEC 884 Needle-Flame Tester Flammability Test Equipment for Electric Components 700 ºC 1. The reference standard IEC 884-1, GB2099.1, VDE, IEC335, GB4706.1, GB5169.5, UL1694. 2. Technical specifications This ...

Brand Name:AI

Model Number:FIPEC

Place of Origin:CHINA

EN50339 Bunched Cable Vertical Flame Spread Tester BVC bunched cable vertical flame tester Introduction EN 50399 specifies the tester and methods of test for the assessment of vertical flame spread, heat release and smoke production of vertically-mounted ...

Brand Name:YUYANG

Model Number:YY109

Place of Origin:China

...spread of flame,flame condition of ignition at multiple distances,critical flux,and total heat release value.It can also measure the burning characteristics of vertical specimen.After recording time of ignition and extinguishment at each distance,we can

Brand Name:SKYLINE

Model Number:SL-F15

Place of Origin:China

...Flammability Testing Equipment comes equipped with a combustion resistance device that is used to regulate the flame height and duration. The device allows users to set the burning time continuously between 0.1-999.9 seconds. During this time, the flame can continuously burn the specimen, allowing users to accurately measure the combustion resistance of the material. The equipment...

Brand Name:HOOHA

Place of Origin:China

...spread of flame,flame condition of ignition at multiple distances,critical flux,and total heat release value.It can also measure the burning characteristics of vertical specimen.After recording time of ignition and extinguishment at each distance,we can

Brand Name:Haida

Model Number:6014-HD

Place of Origin:China

...combustion test equipment. Calibration Procedure Position the copper block 10±1mm above the needle flame burner. Ignite the flame; the time for the copper block temperature to rise from 100°C±2°C to 700°C±3°C must be 44±2 seconds to validate the

Brand Name:GOLD

Model Number:GD-ASTMD1230

Place of Origin:China

... for clothing. It measures the intensity and speed of burning of flammable textiles once ignited when worn. It can also test the damaged area and damaged length of textile fabrics at 45° and the number of times they are exposed to flames when heated and

Brand Name:HTI

Model Number:HTB-002

Place of Origin:Guangdong,China(Mainland)

... flame spread for childrens sleepwear, fabrics, other textile materials or resilient filling materials used in upholstered furniture. Comprises a draft free stainless steel cabinet with observation window and back wall painted black for easy test viewing.

Brand Name:KINGPO

...Flammability Test Equipment Adjustable Burning Height ISO 6941 Flammability Testing Equipment 6941 Flammability Tester Burning Flame Height 0~60mm adjustable Standard: ISO 6941 Application This tester is suitable for clothing with single or multiple components (coatings, quilts, multilayers, laminated products, and the like), curtain plackets and large tents including awnings and door covers for vertical flame...

Brand Name:SHC

Model Number:SC-GWAC

Place of Origin:China

...Flammability Testing Equipment Accessories 1.Flame height gauge Material: thickness of 1-1.5mm stainless steel, IEC606095-11-4 picture 2, IEC606095-11-3 picture 2. Deal board Copper block Platinum pole Flame height gauge Use deal board of 20cm*20cm for glow wire testing Horizontal-vertical tester, needle flame tester dedicated thermometry copperΦ5.5,1.76g(50W)/Φ9,10g(500W)/4*6,0.58g(needle flame...

Brand Name:Sinuo

Model Number:SN771

Place of Origin:China

...Flammability Testing Equipment 500W 50W Complied Standards & Clauses IEC 60695-11-10 “Fire hazard testing -- Part 11-10: Test flames -- 50 W horizontal and vertical flame test methods” IEC 60695-11-20 “Fire hazard testing - Part 11-20: Test flames - 500 W flame test method” IEC 60695-11-4 “Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method” UL 94 “Tests...

Brand Name:Kinte

Model Number:WH-8920JK

Place of Origin:Guangdong,China (Mainland)

...Flammability Test Equipment With Gas Round Mouth Bunsen Burner​ The flammability test is a simulated safety test according to IEC 60950: 1999, UL 94, IEC 707, IEC 695-2-2, ISO 1210: 1992 and other standards. The flammability test is to use a certain size of the Bunsen burner (Bunsen burner) and a specific gas source (methane or natural gas), according to a certain flame height and a certain flame...

Place of Origin:China

Brand Name:CHENGFENG

... lab test apparatus designed to simulate various types of fire and test the flame resistance of materials and products. It is used to determine the flammability of materials and products in accordance with national standards, and is widely used in

Brand Name:DAXIAN

Model Number:DX8369

Place of Origin:China

...Test Single Flame Source Flammability Testing Equipment Description: Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame...

Brand Name:YUYANG

Model Number:YYF059

Place of Origin:China

Flammability Testing Equipment for Needle Flame Test Stainless Steel Housing Requirements: Faults in the product such as fault currents flowing through the leakage path, overheating of components or parts, poor contact, etc. may cause a flame, which may then be directed to nearby parts. The needle flame test simulates the internal part of the product. A small flame...

Brand Name:Gaoxin

Model Number:GX-8348

Place of Origin:China

...tems exposed to a flaming ignition source in a graded radiant heat environment, within a test chamber. It can also be used to measure this same critical radiant flux for exposed attic floor cellulose insulation.Suitable for all kinds of flooring materials.

Brand Name:kingpo

Model Number:KP-FT401

Place of Origin:china

...Flame Tester , 50 W flames tester , 500W flames tester, Flammability Testing Equipment 1.50 /500 W flames tester Brief Introduction Horizontal Burning Test:UL HB,IEC 60695-11-10,IEC 60707,ISO 1210 50W Vertical Burning Test :UL94 V0,V1,V2,IEC 60695-11-10,ISO 1210,IEC 60695-11-4 500W Vertical Burning Test :UL94 5VA,5VB,IEC 60695-11-20,ISO 9770,IEC 60695-11-3 Membrane Material Vertical Burning Test...