gas diffusion layer titanium fiber

Brand Name:Huitong

Model Number:Titanium fiber felt

Place of Origin:China

...a few applications where titanium fiber felt can be utilized in PEM fuel cells: Gas diffusion layer: Titanium fiber felt can be used as a gas diffusion layer (GDL) in PEM fuel cells. The GDL helps distribute reactant gases, such as hydrogen and oxygen,

Brand Name:Porous

Model Number:TPF-1

Place of Origin:Deyang, China

.... The main process of its preparation is: Specification parameter table Parameter Unit Titanium powder felt(TPF) Material / Pure titanium Production process / High temperature sintering Thickness mm 0.15-2.0 Thickness μm ≤40 Surface density g/cm³

Brand Name:Baoji City Changsheng Titanium

Model Number:Titanium Felt

Place of Origin:Baoji City, China

0.25mm Titanium Fiber Felt Anode Gas Diffusion Layer Titanium felt made from micron titanium fiber through special laying process and special high temperature vacuum sintering process. Titanium fiber sintered felt has an excellent three-dimensional network...

Brand Name:SSI-GH

Model Number:SSI-1

Place of Origin:China

SSI-GH is the first in China to use a roll-to-roll process to produce gas diffusion layers. At present, the maximum width of the product can reach 1.2m, which is more suitable for automatic production.The product has stronger electronic conductivity, ...

Brand Name:KUNYA

Model Number:KYF2151988

Place of Origin:Hebei, China

... and high temperature diffusion-bonding (sintering). As a new type of porous material, the non-woven metal fiber has superior filtration function over wire cloth, for it has higher porosity, uniform distribution, greater dirt holding capacity, also

Brand Name:Herrman

Model Number:HM06

Place of Origin:China

... and makes it easy to identify the multi-fibers within the loose tube. Also used to rewind fibers. Main Specification Optical fiber number 1 Coloring speed ≤2200m/min (Nitrogen gas ) Structure speed ≤2500m/min Rewinding speed ≤2200m/min Thickness of

Brand Name:True Gas

Model Number:TYN

Place of Origin:Jiangyin,Jiangsu,China

... temperature and high pressure, oxygen and nitrogen are separated by different-diffusion rate in CMS.Nitrogen purity and output volume is adjustable to meet customer’s requirements. PSA technique (Pressure Swing Adsorption, ...

Brand Name:PASSION

Model Number:ID 8mm

Place of Origin:Zhejiang China

...: Two Layers High tensile polyester fiber braided. Cover: NR & SBR synthetic rubber. Temperature: -30℃ - +80℃ Color: Black, Red, Yellow, Blue, Green, Orange, etc. Application: Mainly used for conveying of air, insert gas and water in mining,

Brand Name:LanShang

Model Number:crepe-gauze-dandelion

Place of Origin:China

...Layer Technology 40S 180GSM Special Textile Baby Blanket Bath Towels Crepe Fabric Dandelion Fiber Cotton Gauze description The cool textile fabric containing dandelion cotton three-layer crepe gauze is composed of the following raw materials in parts by mass: 20-30 parts of dandelion fiber, 10-15 parts of mint fiber, 1-5 parts of bamboo fiber, 3-10 parts of jade fiber, and 0.1 part of nano-titanium...

Brand Name:BIEVO

Model Number:OGZ-2

Place of Origin:China,Jiangsu

20w 30w 50w Fiber Laser Date Coder Marking Machine For Metal Jewelry Laser Engraving Etching Machine Product Features: Fiber Laser Marking Machines .it can be used for marking logo, serial number, bar code and other beautiful patterns on any metallic ...

Brand Name:HXS

Model Number:HDC

Place of Origin:China

Refining and purification system in steel ladle: Blowing argon from the top and bottom of the steel ladle for a short time can even out the temperature of the molten metal in the ladle, drive some inclusions and N,H,O gases to float up, provide an argon ...

Brand Name:Along

Model Number:Along

Place of Origin:Baoji, China

...Titanium Plate For PEM Electrolysis Hydrogen Porous titanium (sintered titanium, titanium foam) is in many fields, like the pharmaceutical industry, water treatment industry, food industry, biological engineering, chemical industry, petrochemical industry, metallurgical industry and gas purification, etc. Porous titanium also can be used as a Gas Diffusion Layer...

Brand Name:AHS

Model Number:ZR-1

Place of Origin:China

... the method of Brownian diffusion trapping with relatively low velocity of gas flow (less than 0.2 m/sec). When gas flows through the layers of extra fine fiber, small particles of mist interact with gas molecules around, which makes these particles move

Model Number:WDK-07

Place of Origin:CN

... oxygen in the measured gas diffuses into the sensor through the diffusion layer and reacts at the working electrode, generating an electric current proportional to the oxygen concentration. This current signal is processed by the internal circuit of the

Brand Name:Questt

Model Number:QA-200FT

Place of Origin:Wuhan,China

... beam quality will be much better and suitable for precise laser welding. When laser radiation heats the surface of work-piece, the surface heat diffuses to the interior through thermal conduction and melts the work piece by

Categories:Explosive Welding Clad Plate

Country/Region:china

...Titanium Steel Clad Plate For Chimney - Flue Gas Desulfurization Device Of Power Station Boilers 1. Definition and Composition A hot - rolled titanium steel clad plate is a composite material that combines titanium and steel. It is typically produced by a hot - rolling process. The plate consists of a steel base layer and a titanium cladding layer. The steel provides strength and structural integrity, while the titanium...

Brand Name:Xinli

Model Number:SS316L

Place of Origin:Henan

...Fiber Felt Filter Cartridge Use For Gas Dust Removing Prodcut Introdcution: Gas Dust-removing filter cartridge is made of stainless steel non-woven fiber by sintered and then processed to be.Usually,sintered fiber felt has one layer or two layers protective mesh as the support layer to increase the strength of the filter cartridge.Or a perforated tube is added to the inner of the sintered fiber...

Model Number:HH-ANODE

Place of Origin:China

...Titanium Anode Mesh Iridium-based MMO coated titanium anodes are a type of insoluble anode, which are coated with an iridium oxide layer on a titanium substrate using a special process. This coating endows the anode with excellent electrocatalytic activity and conductivity. In electrochemical reactions, based on the classification by gas evolution, iridium-based MMO coated titanium...

Brand Name:JXS

Place of Origin:China

PVD Coating Equipment PVD Coating Equipment Main Parameters Chamber Size Custom Made Chamber Cooling Way Indirect Cooling Pump Brand China Pump Group Rotary Vane Pump+Roots Pump+Diffusion Pump PLC Brand Mitsubishi PVD Coating Equipment Main Feature: Full ...